2021Journal Article ER5 Auteurs : Gloriant, François; Joulin, Annabelle; Tittelein, Pierre; Lassue, Stéphane Using heat flux sensors for a contribution to experimental analysis of heat transfers on a triple-glazed supply-air window In: Energy, vol. 215, pp. 119154, 2021, ISSN: 0360-5442, (ACL). Abstract | Links @article{GLORIANT2021119154,
title = {Using heat flux sensors for a contribution to experimental analysis of heat transfers on a triple-glazed supply-air window},
author = {François Gloriant and Annabelle Joulin and Pierre Tittelein and Stéphane Lassue},
url = {https://www.sciencedirect.com/science/article/pii/S0360544220322611},
doi = {https://doi.org/10.1016/j.energy.2020.119154},
issn = {0360-5442},
year = {2021},
date = {2021-01-01},
urldate = {2021-01-01},
journal = {Energy},
volume = {215},
pages = {119154},
abstract = {An experimental set-up of triple-glazed supply-air window is developed in this research in order to characterize the window’s thermal performance without solar radiation. By simultaneously measuring the local temperatures and heat fluxes with thermocouples and heat fluxmeters, the heat fluxes determination requires no longer using the correlations of heat transfer coefficients around the window, which are often the source of high uncertainties. Results show that the use of fluxmeters brought a more accurate measure of heat transfers around and in the window. Thereafter, the heat transfer coefficients can be correctly estimated by empirical evidence. Uncertainty analysis is then presented to highlight the reliability of the experimental method. Afterwards, the obtained experimental data are compared with those of numerical model developed by using Fluent® software. A thorough comparison analysis is provided to explain which parameters play a role in deviating the results between the two methods, leading to conclude the validity of numerical model assumptions with respect to the real conditions of experimental set-up.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
An experimental set-up of triple-glazed supply-air window is developed in this research in order to characterize the window’s thermal performance without solar radiation. By simultaneously measuring the local temperatures and heat fluxes with thermocouples and heat fluxmeters, the heat fluxes determination requires no longer using the correlations of heat transfer coefficients around the window, which are often the source of high uncertainties. Results show that the use of fluxmeters brought a more accurate measure of heat transfers around and in the window. Thereafter, the heat transfer coefficients can be correctly estimated by empirical evidence. Uncertainty analysis is then presented to highlight the reliability of the experimental method. Afterwards, the obtained experimental data are compared with those of numerical model developed by using Fluent® software. A thorough comparison analysis is provided to explain which parameters play a role in deviating the results between the two methods, leading to conclude the validity of numerical model assumptions with respect to the real conditions of experimental set-up. |
2016Proceedings Article ER5 Auteurs : Khadra, Mariam; Joulin, Annabelle; Tittelein, Pierre; Lassue, Stéphane Modélisation d’un canal rectangulaire ventilé ouvert soumis à des sollicitations thermiques asymétriques et Analyse des échanges thermiques In: actes du Congrès Français de Thermique 2016, Toulouse, 2016, (ACTN). Abstract | Links @inproceedings{khadra_modelisation_2016,
title = {Modélisation d’un canal rectangulaire ventilé ouvert soumis à des sollicitations thermiques asymétriques et Analyse des échanges thermiques},
author = {Mariam Khadra and Annabelle Joulin and Pierre Tittelein and Stéphane Lassue},
url = {http://www.sft.asso.fr/Local/sft/dir/user-3775/documents/actes/Congres_2016/resumes_toulouse/96.pdf},
year = {2016},
date = {2016-01-01},
booktitle = {actes du Congrès Français de Thermique 2016},
address = {Toulouse},
abstract = {Cet article traite de l’étude d’un système pariéto-dynamique destinée à la rénovation par l’extérieur des bâtiments. Le dispositif étudié est composé d’éléments opaques et est associé à une arrivée d'air extérieur permettant ainsi au fluide, en circulant entre les parois, de récupérer une partie de l'énergie solaire stockée et des déperditions thermiques à travers cette paroi. Dans le cadre de notre étude, des modélisations ont été conduites à l’aide du logiciel Fluent® et permettent de discuter de l’importance des paramètres physiques et dynamiques sur les transferts thermiques s’opérant à l’intérieur de la cavité ventilée. Cette étape nous permet également d’étudier le comportement du fluide en mouvement et d’analyser l’incidence du flux solaire absorbé sur les profils de vitesses et de températures.},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {inproceedings}
}
Cet article traite de l’étude d’un système pariéto-dynamique destinée à la rénovation par l’extérieur des bâtiments. Le dispositif étudié est composé d’éléments opaques et est associé à une arrivée d'air extérieur permettant ainsi au fluide, en circulant entre les parois, de récupérer une partie de l'énergie solaire stockée et des déperditions thermiques à travers cette paroi. Dans le cadre de notre étude, des modélisations ont été conduites à l’aide du logiciel Fluent® et permettent de discuter de l’importance des paramètres physiques et dynamiques sur les transferts thermiques s’opérant à l’intérieur de la cavité ventilée. Cette étape nous permet également d’étudier le comportement du fluide en mouvement et d’analyser l’incidence du flux solaire absorbé sur les profils de vitesses et de températures. |
2015Conference ER5 Auteurs : Bédécarrats, Jean-Pierre; David, Damien; Defer, Didier; Dumas, Jean-Pierre; Franquet, Erwin; Gibout, Stéphane; Haillot, Didier; Johannes, Kévyn; Joulin, Annabelle; Kuznik, Frédéric; Lassue, Stéphane; Maréchal, William; Naji, Hassane; Tittelein, Pierre; Zalewski, Laurent Caractérisation des matériaux à changement de phase pour la simulation thermique des bâtiments actes du Congrès Français de Thermique 2015, La Rochelle, 2015, (ACTN). @conference{bede2015a,
title = {Caractérisation des matériaux à changement de phase pour la simulation thermique des bâtiments},
author = {Jean-Pierre Bédécarrats and Damien David and Didier Defer and Jean-Pierre Dumas and Erwin Franquet and Stéphane Gibout and Didier Haillot and Kévyn Johannes and Annabelle Joulin and Frédéric Kuznik and Stéphane Lassue and William Maréchal and Hassane Naji and Pierre Tittelein and Laurent Zalewski},
year = {2015},
date = {2015-05-01},
booktitle = {actes du Congrès Français de Thermique 2015},
address = {La Rochelle},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conference ER5 Auteurs : Bédécarrats, Jean-Pierre; David, Damien; Defer, Didier; Dumas, Jean-Pierre; Franquet, Erwin; Gibout, Stéphane; Haillot, Didier; Johannes, Kevyn; Joulin, Annabelle; Kuznik, Frédéric; Lassue, Stéphane; Maréchal, William; Naji, Hassane; Tittelein, Pierre; Zalewski, Laurent Phase change materials characterisation and applications to the thermal simulation of buildings Proceedings of ECOS 2015, Pau, 2015, (ACTI). Abstract @conference{bede2015b,
title = {Phase change materials characterisation and applications to the thermal simulation of buildings},
author = {Jean-Pierre Bédécarrats and Damien David and Didier Defer and Jean-Pierre Dumas and Erwin Franquet and Stéphane Gibout and Didier Haillot and Kevyn Johannes and Annabelle Joulin and Frédéric Kuznik and Stéphane Lassue and William Maréchal and Hassane Naji and Pierre Tittelein and Laurent Zalewski},
year = {2015},
date = {2015-07-01},
booktitle = {Proceedings of ECOS 2015},
address = {Pau},
abstract = {We aim here at presenting the main results of the Stock-E MICMCP ANR
project whose principal goal is the correct thermophysical characterisation
of phase change materials in order to have reliable inputs when considering
numerical simulations of thermal behaviour of buildings. Firstly,
we will present the method developed to determine the function governing
the enthalpy with respect to the temperature of the material. It
is based on the use of experimental measurements together with an
inversion method: by comparing the heat flow with a simulated one,
obtained by assuming an a priori formulation of the enthalpy (which
set some basic thermodynamical constraints), we may calculate the
numerical values of the associated parameters. Secondly, we will
show that this method can be extended to macroscopic and heterogeneous
materials, which are more representative of real samples. Eventually,
we will show on some examples of thermal buildings simulations the
necessity to correctly represent the PCM behaviour if one wants to
use them in the future so as to save energy and for a better comfort.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
We aim here at presenting the main results of the Stock-E MICMCP ANR
project whose principal goal is the correct thermophysical characterisation
of phase change materials in order to have reliable inputs when considering
numerical simulations of thermal behaviour of buildings. Firstly,
we will present the method developed to determine the function governing
the enthalpy with respect to the temperature of the material. It
is based on the use of experimental measurements together with an
inversion method: by comparing the heat flow with a simulated one,
obtained by assuming an a priori formulation of the enthalpy (which
set some basic thermodynamical constraints), we may calculate the
numerical values of the associated parameters. Secondly, we will
show that this method can be extended to macroscopic and heterogeneous
materials, which are more representative of real samples. Eventually,
we will show on some examples of thermal buildings simulations the
necessity to correctly represent the PCM behaviour if one wants to
use them in the future so as to save energy and for a better comfort. |
2015Conference ER5 Auteurs : Gloriant, Francois; Joulin, Annabelle; Tittelein, Pierre; Lassue, Stéphane L'étude des performances d'une fenêtre ventilée pour la récupération de chaleur par l'air neuf de ventilation Actes du CIFQ 2015, Sherbrook, 2015, (ACTI). Abstract @conference{gloriant_etude_2015,
title = {L'étude des performances d'une fenêtre ventilée pour la récupération de chaleur par l'air neuf de ventilation},
author = {Francois Gloriant and Annabelle Joulin and Pierre Tittelein and Stéphane Lassue},
year = {2015},
date = {2015-06-01},
booktitle = {Actes du CIFQ 2015},
address = {Sherbrook},
abstract = {Cette communication a pour objet l’étude numérique des performances
d’une fen^etre ventilée (pariétodynamique), dont le
principe repose sur la circulation de l’air neuf de ventilation
entre les vitrages avant son introduction dans un logement. L'étude
est réalisée `a l'aide d'un code de calcul commercial
de mécanique des fluides numériques (MFN) permettant la mise
au point d'un mod`ele simplifié adapté `a la simulation
thermique des b^atiments. A partir des résultats de simulation,
des études paramétriques sont effectuées afin de rendre
compte des facteurs influant sur les performances énergétiques
de la fen^etre tels que : •le débit d’air ; •les épaisseurs
de cavité ; •la présence de rev^etements faiblement
émissifs ; •les dimensions de la surface vitrée.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
Cette communication a pour objet l’étude numérique des performances
d’une fen^etre ventilée (pariétodynamique), dont le
principe repose sur la circulation de l’air neuf de ventilation
entre les vitrages avant son introduction dans un logement. L'étude
est réalisée `a l'aide d'un code de calcul commercial
de mécanique des fluides numériques (MFN) permettant la mise
au point d'un mod`ele simplifié adapté `a la simulation
thermique des b^atiments. A partir des résultats de simulation,
des études paramétriques sont effectuées afin de rendre
compte des facteurs influant sur les performances énergétiques
de la fen^etre tels que : •le débit d’air ; •les épaisseurs
de cavité ; •la présence de rev^etements faiblement
émissifs ; •les dimensions de la surface vitrée. |
2015Conference ER5 Auteurs : Gloriant, Francois; Tittelein, Pierre; Joulin, Annabelle; Lassue, Stéphane Etude expérimentale d'une fenêtre parietodynamique de type Paziaud actes du Congrès Français de Thermique 2015, La Rochelle, 2015, (ACTN). @conference{gloriant_etude_2015-1,
title = {Etude expérimentale d'une fenêtre parietodynamique de type Paziaud},
author = {Francois Gloriant and Pierre Tittelein and Annabelle Joulin and Stéphane Lassue},
year = {2015},
date = {2015-05-01},
booktitle = {actes du Congrès Français de Thermique 2015},
address = {La Rochelle},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conference ER5 Auteurs : Gloriant, Francois; Tittelein, Pierre; Joulin, Annabelle; Lassue, Stéphane Study Of Ŧhe Performances Of A Supply-Air Window For Air Renewal Pre-Ħeating Proceedings of IBPC 2015, Torino (Italy), 2015, (ACTI). Abstract @conference{gloriant_study_2015,
title = {Study Of Ŧhe Performances Of A Supply-Air Window For Air Renewal Pre-Ħeating},
author = {Francois Gloriant and Pierre Tittelein and Annabelle Joulin and Stéphane Lassue},
year = {2015},
date = {2015-06-01},
booktitle = {Proceedings of IBPC 2015},
address = {Torino (Italy)},
abstract = {The principle of a supply-air window is based on the air renewal circulation
between the glazings of a window before entering home. We study in
this work the Paziaud® window composed of three glazings forming
a U-shaped channel. The air warms up by recovering some part of the
heat losses from the building and also by solar radiation absorbed
through the glasses. This system generally works in forced convection
by association with an air extraction system. This type of component
is not embedded in usual dynamic tools for building thermal simulation.
A major reason of this lack is that the heat transfers through the
walls and the air exchange are treated separately. Moreover, this
particular system is characterized by different heat fluxes if we
consider the inner or the outer surface of the component. Our contribution
is based on an original and appropriate representation of convective
heat transfer in asymmetrically heated air layers. We offer a #simplified#
model that can be easily implemented in dynamic simulation tools.
This model is compared CFD simulations. From this model, parametric
studies are performed to look for the parameters influencing the
performance of the Paziaud® window: we show here that boundary conditions
in temperatures, the thickness of the cavities, low emissivity coatings
and the glazing area have significant effects on the performance
criteria. We perform the parametric study on the basis of indicators
specifically defined for the supply-air window},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
The principle of a supply-air window is based on the air renewal circulation
between the glazings of a window before entering home. We study in
this work the Paziaud® window composed of three glazings forming
a U-shaped channel. The air warms up by recovering some part of the
heat losses from the building and also by solar radiation absorbed
through the glasses. This system generally works in forced convection
by association with an air extraction system. This type of component
is not embedded in usual dynamic tools for building thermal simulation.
A major reason of this lack is that the heat transfers through the
walls and the air exchange are treated separately. Moreover, this
particular system is characterized by different heat fluxes if we
consider the inner or the outer surface of the component. Our contribution
is based on an original and appropriate representation of convective
heat transfer in asymmetrically heated air layers. We offer a #simplified#
model that can be easily implemented in dynamic simulation tools.
This model is compared CFD simulations. From this model, parametric
studies are performed to look for the parameters influencing the
performance of the Paziaud® window: we show here that boundary conditions
in temperatures, the thickness of the cavities, low emissivity coatings
and the glazing area have significant effects on the performance
criteria. We perform the parametric study on the basis of indicators
specifically defined for the supply-air window |
2015Journal Article ER5 Auteurs : Gloriant, François; Tittelein, Pierre; Joulin, Annabelle; Lassue, Stéphane Modeling a triple-glazed supply-air window In: Building and Environment, vol. 84, pp. 1–9, 2015, (ACL). @article{Gloriant2015,
title = {Modeling a triple-glazed supply-air window},
author = {François Gloriant and Pierre Tittelein and Annabelle Joulin and Stéphane Lassue},
year = {2015},
date = {2015-01-01},
journal = {Building and Environment},
volume = {84},
pages = {1--9},
publisher = {Elsevier},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2015Journal Article ER5 Auteurs : Gloriant, François; Tittelein, Pierre; Joulin, Annabelle; Lassue, Stéphane Study of the Performances of A Supply-Air Window for Air Renewal Pre-Heating In: Energy Procedia, vol. 78, pp. 525–530, 2015, ISSN: 1876-6102, (ACL). Abstract | Links @article{gloriant_study_2015-1,
title = {Study of the Performances of A Supply-Air Window for Air Renewal Pre-Heating},
author = {François Gloriant and Pierre Tittelein and Annabelle Joulin and Stéphane Lassue},
url = {http://www.sciencedirect.com/science/article/pii/S1876610215024595},
doi = {10.1016/j.egypro.2015.11.727},
issn = {1876-6102},
year = {2015},
date = {2015-11-01},
urldate = {2016-01-26},
journal = {Energy Procedia},
volume = {78},
pages = {525--530},
series = {6th International Building Physics Conference, IBPC 2015},
abstract = {The principle of a supply-air window is based on the air renewal circulation between the glazings of a window before entering home. We study in this work the Paziaud® window composed of three glazings forming a U-shaped channel. The air warms up by recovering some part of the heat losses from the building and also by solar radiation absorbed through the glasses. This system generally works in forced convection by association with an air extraction system. This type of component is not embedded in usual dynamic tools for building thermal simulation. A major reason of this lack is that the heat transfers through the walls and the air exchange are treated separately. Moreover, this particular system is characterized by different heat fluxes if we consider the inner or the outer surface of the component. Our contribution is based on an original and appropriate representation of convective heat transfer in asymmetrically heated air layers. We offer a “simplified” model that can be easily implemented in dynamic simulation tools. This model is compared CFD simulations. From this model, parametric studies are performed to look for the parameters influencing the performance of the Paziaud® window: we show here that boundary conditions in temperatures, the thickness of the cavities, low emissivity coatings and the glazing area have significant effects on the performance criteria. We perform the parametric study on the basis of indicators specifically defined for the supply-air window.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
The principle of a supply-air window is based on the air renewal circulation between the glazings of a window before entering home. We study in this work the Paziaud® window composed of three glazings forming a U-shaped channel. The air warms up by recovering some part of the heat losses from the building and also by solar radiation absorbed through the glasses. This system generally works in forced convection by association with an air extraction system. This type of component is not embedded in usual dynamic tools for building thermal simulation. A major reason of this lack is that the heat transfers through the walls and the air exchange are treated separately. Moreover, this particular system is characterized by different heat fluxes if we consider the inner or the outer surface of the component. Our contribution is based on an original and appropriate representation of convective heat transfer in asymmetrically heated air layers. We offer a “simplified” model that can be easily implemented in dynamic simulation tools. This model is compared CFD simulations. From this model, parametric studies are performed to look for the parameters influencing the performance of the Paziaud® window: we show here that boundary conditions in temperatures, the thickness of the cavities, low emissivity coatings and the glazing area have significant effects on the performance criteria. We perform the parametric study on the basis of indicators specifically defined for the supply-air window. |
2014Journal Article ER5 Auteurs : Dutil, Yvan; Rousse, Daniel; Lassue, Stéphane; Zalewski, Laurent; Joulin, Annabelle; Virgone, Joseph; Kuznik, Frédéric; Johannes, Kevyn; Dumas, Jean-Pierre; Bédécarrats, Jean-Pierre; others, Modeling phase change materials behavior in building applications: Comments on material characterization and model validation In: Renewable Energy, vol. 61, pp. 132–135, 2014, (ACL). @article{Dutil2014,
title = {Modeling phase change materials behavior in building applications: Comments on material characterization and model validation},
author = {Yvan Dutil and Daniel Rousse and Stéphane Lassue and Laurent Zalewski and Annabelle Joulin and Joseph Virgone and Frédéric Kuznik and Kevyn Johannes and Jean-Pierre Dumas and Jean-Pierre Bédécarrats and others},
year = {2014},
date = {2014-01-01},
journal = {Renewable Energy},
volume = {61},
pages = {132--135},
publisher = {Elsevier},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2014Conference ER5 Auteurs : Gloriant, Francois; Tittelein, Pierre; Joulin, Annabelle; Lassue, Stéphane Convection forcée laminaire de l'air entre deux parois proches soumises à des conditions de Fourier actes du Congrès Français de Thermique 2014, Lyon, 2014, (ACTN). Abstract @conference{gloriant_convection_2014,
title = {Convection forcée laminaire de l'air entre deux parois proches soumises à des conditions de Fourier},
author = {Francois Gloriant and Pierre Tittelein and Annabelle Joulin and Stéphane Lassue},
year = {2014},
date = {2014-06-01},
booktitle = {actes du Congrès Français de Thermique 2014},
address = {Lyon},
abstract = {On se propose de modéliser un écoulement laminaire d'air en
convection forcée entre deux parois dont les conditions aux limites
de chauffage asymétrique imposées sont des conditions de
type Fourier. Dans le cas d'un chauffage symétrique, lorsque
le régime thermique et le régime dynamique sont établis,
le nombre de Nusselt est déterminé analytiquement et les
valeurs calculées sont constantes. Cependant, le probl`eme
étudié ici repose sur des conditions aux limites constantes
mais différentes sur les deux parois du canal vertical, et par
conséquent la résolution analytique, notamment pour des conditions
aux limites de Fourier, devient plus délicate},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
On se propose de modéliser un écoulement laminaire d'air en
convection forcée entre deux parois dont les conditions aux limites
de chauffage asymétrique imposées sont des conditions de
type Fourier. Dans le cas d'un chauffage symétrique, lorsque
le régime thermique et le régime dynamique sont établis,
le nombre de Nusselt est déterminé analytiquement et les
valeurs calculées sont constantes. Cependant, le probl`eme
étudié ici repose sur des conditions aux limites constantes
mais différentes sur les deux parois du canal vertical, et par
conséquent la résolution analytique, notamment pour des conditions
aux limites de Fourier, devient plus délicate |
2014Journal Article ER5 Auteurs : Joulin, Annabelle; Zalewski, Laurent; Lassue, Stéphane; Naji, Hassane Experimental investigation of thermal characteristics of a mortar with or without a micro-encapsulated phase change material In: Applied Thermal Engineering, vol. 66, no. 1–2, pp. 171 - 180, 2014, ISSN: 1359-4311, (ACL). Links @article{Joulin2014,
title = {Experimental investigation of thermal characteristics of a mortar with or without a micro-encapsulated phase change material},
author = {Annabelle Joulin and Laurent Zalewski and Stéphane Lassue and Hassane Naji},
url = {http://www.sciencedirect.com/science/article/pii/S1359431114000337},
doi = {https://doi.org/10.1016/j.applthermaleng.2014.01.027},
issn = {1359-4311},
year = {2014},
date = {2014-01-01},
journal = {Applied Thermal Engineering},
volume = {66},
number = {1–2},
pages = {171 - 180},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2013Journal Article ER5 Auteurs : Desrayaud, G; Chenier, E; Joulin, Annabelle; Bastide, A; Brangeon, B; Caltagirone, J P; Cherif, Yassine; Eymard, R; Garnier, C; Giroux-Julien, S; Harnane, Y; Joubert, P; Laaroussi, N; Lassue, Stéphane; Quere, Le P; Li, R; Saury, D; Sergent, A; Xin, S; Zoubir, A Benchmark solutions for natural convection flows in vertical channels submitted to different open boundary conditions In: International Journal of Thermal Sciences, vol. 72, pp. 18 - 33, 2013, ISSN: 1290-0729, (ACL). Links @article{Desrayaud201318,
title = {Benchmark solutions for natural convection flows in vertical channels submitted to different open boundary conditions},
author = {G Desrayaud and E Chenier and Annabelle Joulin and A Bastide and B Brangeon and J P Caltagirone and Yassine Cherif and R Eymard and C Garnier and S Giroux-Julien and Y Harnane and P Joubert and N Laaroussi and Stéphane Lassue and Le P Quere and R Li and D Saury and A Sergent and S Xin and A Zoubir},
url = {http://www.sciencedirect.com/science/article/pii/S1290072913001130},
doi = {http://dx.doi.org/10.1016/j.ijthermalsci.2013.05.003},
issn = {1290-0729},
year = {2013},
date = {2013-01-01},
journal = {International Journal of Thermal Sciences},
volume = {72},
pages = {18 - 33},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2013Conference ER5 Auteurs : Gloriant, Francois; Joulin, Annabelle; Tittelein, Pierre; Lassue, Stéphane Échanges convectifs entre deux parois planes, verticales, soumises à des conditions de type Fourier actes du Congrès Français de Thermique 2013, Gérarmer (France), 2013, (ACTN). Abstract @conference{gloriant_echanges_2013,
title = {Échanges convectifs entre deux parois planes, verticales, soumises à des conditions de type Fourier},
author = {Francois Gloriant and Annabelle Joulin and Pierre Tittelein and Stéphane Lassue},
year = {2013},
date = {2013-05-01},
booktitle = {actes du Congrès Français de Thermique 2013},
address = {Gérarmer (France)},
abstract = {Cet article traite du probl`eme de la convection forcée d’un
écoulement d’air en régime laminaire dans un conduit formé
par deux plans parall`eles soumis `a des conditions aux limites
de type Fourier. Deux modélisations basées sur des bilans
thermiques sont présentées et leurs résultats sont comparés
aux données numériques issues de simulations 2D effectuées
avec le logiciel Fluent®. Une réflexion est menée sur la
façon dont les coefficients de convection caractérisant
les échanges thermiques entre le fluide et chacune des parois
peuvent ^etre définis.},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
Cet article traite du probl`eme de la convection forcée d’un
écoulement d’air en régime laminaire dans un conduit formé
par deux plans parall`eles soumis `a des conditions aux limites
de type Fourier. Deux modélisations basées sur des bilans
thermiques sont présentées et leurs résultats sont comparés
aux données numériques issues de simulations 2D effectuées
avec le logiciel Fluent®. Une réflexion est menée sur la
façon dont les coefficients de convection caractérisant
les échanges thermiques entre le fluide et chacune des parois
peuvent ^etre définis. |
2013Conference ER5 Auteurs : Gloriant, Francois; Tittelein, Pierre; Joulin, Annabelle; Lassue, Stéphane Modèlisation d'une fenêtre parieto-dynamique dans la simulation thermique d'un bâtiment. CIFQ 2013, Reims (France), 2013, (ACTI). Abstract @conference{gloriant_modelisation_2013,
title = {Modèlisation d'une fenêtre parieto-dynamique dans la simulation thermique d'un bâtiment.},
author = {Francois Gloriant and Pierre Tittelein and Annabelle Joulin and Stéphane Lassue},
year = {2013},
date = {2013-06-01},
booktitle = {CIFQ 2013},
address = {Reims (France)},
abstract = {Le principe de la fen^etre pariéto-dynamique consiste `a
faire circuler l’air neuf de ventilation entre des lames de verre
avant son introduction dans le volume habitable. Une partie de la
chaleur traversant les vitrages est alors récupérée par
le flux d’air. Actuellement la prise en compte de ce genre de syst`eme
dans les codes de simulation thermique des b^atiments n’est
pas satisfaisante. Cet article propose un mod`ele qui peut ^etre
implémenté relativement aisément dans de nombreux outils
de simulations existant. Ce mod`ele est basé sur une résolution
analytique du probl`eme de l’air circulant entre deux plaques
isothermes différentiellement chauffées. Il a été
implémenté dans la biblioth`eque de composants de l’outil
de simulation Modelica. Une attention particuli`ere a été
portée sur les échanges convectifs en lame d’air entre
les vitrages. Les résultats obtenus sont comparés `a ceux
d’un outil de simulation CFD commercial, le code Fluent©},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
Le principe de la fen^etre pariéto-dynamique consiste `a
faire circuler l’air neuf de ventilation entre des lames de verre
avant son introduction dans le volume habitable. Une partie de la
chaleur traversant les vitrages est alors récupérée par
le flux d’air. Actuellement la prise en compte de ce genre de syst`eme
dans les codes de simulation thermique des b^atiments n’est
pas satisfaisante. Cet article propose un mod`ele qui peut ^etre
implémenté relativement aisément dans de nombreux outils
de simulations existant. Ce mod`ele est basé sur une résolution
analytique du probl`eme de l’air circulant entre deux plaques
isothermes différentiellement chauffées. Il a été
implémenté dans la biblioth`eque de composants de l’outil
de simulation Modelica. Une attention particuli`ere a été
portée sur les échanges convectifs en lame d’air entre
les vitrages. Les résultats obtenus sont comparés `a ceux
d’un outil de simulation CFD commercial, le code Fluent© |
2013Conference ER5 Auteurs : Gloriant, Francois; Tittelein, Pierre; Joulin, Annabelle; Lassue, Stéphane Modelling supply-air window in a building simulation code Building Simulation 2013, Chambéry (France), 2013, (ACTI). Abstract @conference{gloriant_modelling_2013,
title = {Modelling supply-air window in a building simulation code},
author = {Francois Gloriant and Pierre Tittelein and Annabelle Joulin and Stéphane Lassue},
year = {2013},
date = {2013-01-01},
booktitle = {Building Simulation 2013},
address = {Chambéry (France)},
abstract = {The concept of a supply-air window is to allow air renewal circulating
between glasses before entering inwards. Based on this principle,
a part of heat transfer through the glasses is recovered by air renewal.
Actually, the way to consider it in a building simulation code is
not satisfactory. This article proposes a model that can be implemented
easily in many building simulation codes. This model is based on
the analytical solution of the problem of air circulating between
isotherm panes differentially heated. It has been implemented in
Buildings library of Modelica. Short wave radiation is considered
by using the equation of Window software. Long wave radiation is
considered using radiosity model. A special attention is taken to
consider convective heat transfer coefficient between air space and
glasses. The results obtained are compared to those of a commercial
computational fluid dynamics (CFD) code (Fluent).},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
The concept of a supply-air window is to allow air renewal circulating
between glasses before entering inwards. Based on this principle,
a part of heat transfer through the glasses is recovered by air renewal.
Actually, the way to consider it in a building simulation code is
not satisfactory. This article proposes a model that can be implemented
easily in many building simulation codes. This model is based on
the analytical solution of the problem of air circulating between
isotherm panes differentially heated. It has been implemented in
Buildings library of Modelica. Short wave radiation is considered
by using the equation of Window software. Long wave radiation is
considered using radiosity model. A special attention is taken to
consider convective heat transfer coefficient between air space and
glasses. The results obtained are compared to those of a commercial
computational fluid dynamics (CFD) code (Fluent). |
2013Conference ER5 Auteurs : Gloriant, Francois; Tittelein, Pierre; Joulin, Annabelle; Lassue, Stéphane Supply-Air Window Model adapted to Building Energy Performance Simulation CLIMA 2013; 11th REHVA World Congress, Prague (Czech Republic), 2013, (ACTI). Abstract @conference{gloriant_supply-air_2013,
title = {Supply-Air Window Model adapted to Building Energy Performance Simulation},
author = {Francois Gloriant and Pierre Tittelein and Annabelle Joulin and Stéphane Lassue},
year = {2013},
date = {2013-06-01},
booktitle = {CLIMA 2013; 11th REHVA World Congress},
address = {Prague (Czech Republic)},
abstract = {The principle of a supply-air window is to make the renewal airflow
circulating between the panes of glass before entering inside the
room. The goal is to create a passive system of heat recovery contributing
also to the room ventilation. The aim of this article is to define
the best way to take into account this kind of window in building
energy simulations. Depending on the case studied and the accuracy
desired, it can be modelled simply considering a constant U-value
pre-calculated, considering a U-value and a heat recovery on air
renewal or considering a model closer to the physical reality but
easy to implement in a building performance code. These models are
compared to an accurate model using Computational Fluid Dynamics
(CFD). The way to consider the problem can be used for every kind
of supply-air window (and also for exhaust-air window), but for more
clarity, a precise example was considered in this article. It is
the case of Paziaud® window that is a triple glazed window with
a U-shaped air channel.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
The principle of a supply-air window is to make the renewal airflow
circulating between the panes of glass before entering inside the
room. The goal is to create a passive system of heat recovery contributing
also to the room ventilation. The aim of this article is to define
the best way to take into account this kind of window in building
energy simulations. Depending on the case studied and the accuracy
desired, it can be modelled simply considering a constant U-value
pre-calculated, considering a U-value and a heat recovery on air
renewal or considering a model closer to the physical reality but
easy to implement in a building performance code. These models are
compared to an accurate model using Computational Fluid Dynamics
(CFD). The way to consider the problem can be used for every kind
of supply-air window (and also for exhaust-air window), but for more
clarity, a precise example was considered in this article. It is
the case of Paziaud® window that is a triple glazed window with
a U-shaped air channel. |
2012Journal Article ER5 Auteurs : Dutil, Y; Rousse, D; Lassue, Stéphane; Zalewski, Laurent; Joulin, Annabelle; Virgone, J; Kuznik, F; JohannesK.,; Dumas, J P; Bedecarrats, J P; Castell, L F A Modeling phase change materials behavior in building applications: comments on material characterization and model validation, RenewableEnergy, 2012. In: 2012, (ACL). @article{Dutil2012,
title = {Modeling phase change materials behavior in building applications: comments on material characterization and model validation, RenewableEnergy, 2012.},
author = {Y Dutil and D Rousse and Stéphane Lassue and Laurent Zalewski and Annabelle Joulin and J Virgone and F Kuznik and JohannesK. and J P Dumas and J P Bedecarrats and L F A Castell},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER5 Auteurs : Joulin, Annabelle; Younsi, Zohir; Lassue, Stéphane; Zalewski, Laurent Fixed grid numerical simulation of a phase change material in a rectangularenclosure heated from one side, in Navier-Stokes equations, Properties,description and applications physics research and technology,Nova Publisher Editor, ISBN 978, In: 2012, (ACL). @article{Joul2012a,
title = {Fixed grid numerical simulation of a phase change material in a rectangularenclosure heated from one side, in Navier-Stokes equations, Properties,description and applications physics research and technology,Nova Publisher Editor, ISBN 978,},
author = {Annabelle Joulin and Zohir Younsi and Stéphane Lassue and Laurent Zalewski},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER5 Auteurs : Tilioua, A; Libessart, Laurent; Joulin, Annabelle; Lassue, Stéphane Etude des proprietes thermo-physiques des isolants fibreux textile, Annales du BTP, fevrier 2012 In: 2012, (ACL). @article{Tilioua2012,
title = {Etude des proprietes thermo-physiques des isolants fibreux textile, Annales du BTP, fevrier 2012},
author = {A Tilioua and Laurent Libessart and Annabelle Joulin and Stéphane Lassue},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2012Journal Article ER5 Auteurs : Zalewski, Laurent; Joulin, Annabelle; Lassue, Stéphane; Dutil, Y; Rousse, D Experimental study of small-scaled solar wall integrating phase changematerial, Solar Energy 86, January 2012, Pages 208-219 In: 2012, (ACL). @article{zale2012a,
title = {Experimental study of small-scaled solar wall integrating phase changematerial, Solar Energy 86, January 2012, Pages 208-219},
author = {Laurent Zalewski and Annabelle Joulin and Stéphane Lassue and Y Dutil and D Rousse},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Journal Article ER5 Auteurs : Joulin, Annabelle; Younsi, Zohir; Zalewski, Laurent; Lassue, Stéphane; Rousse, D; Cavrot, J-P Experimental and numerical investigation of phase change materials : thermal energy storage and release, Applied Energy, Volume 88, Issue 7, July 2011, Pages 2454-2462 In: 2011, (ACL). @article{joul2011a,
title = {Experimental and numerical investigation of phase change materials : thermal energy storage and release, Applied Energy, Volume 88, Issue 7, July 2011, Pages 2454-2462},
author = {Annabelle Joulin and Zohir Younsi and Laurent Zalewski and Stéphane Lassue and D Rousse and J-P Cavrot},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Journal Article ER5 Auteurs : Younsi, Zohir; Lassue, Stéphane; Zalewski, Laurent; Joulin, Annabelle Experimental and numerical investigation of phase change materials: thermal energy storage and release, Applied Energy 88 (2011)2454-2462. In: 2011, (ACL). @article{Younsi2011,
title = {Experimental and numerical investigation of phase change materials: thermal energy storage and release, Applied Energy 88 (2011)2454-2462.},
author = {Zohir Younsi and Stéphane Lassue and Laurent Zalewski and Annabelle Joulin},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Journal Article ER5 Auteurs : Younsi, Zohir; Lassue, Stéphane; Zalewski, Laurent; Joulin, Annabelle A novel technique for the experimental thermophysical characterization of phase change materials, International Journal of Ŧhermophysics, Springer Science+Business Media, LLC 2010. In: 2010, (ACL). @article{Younsi2010,
title = {A novel technique for the experimental thermophysical characterization of phase change materials, International Journal of Ŧhermophysics, Springer Science+Business Media, LLC 2010.},
author = {Zohir Younsi and Stéphane Lassue and Laurent Zalewski and Annabelle Joulin},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Conference ER5 Auteurs : Zalewski, Laurent; Joulin, Annabelle; Lassue, Stéphane; Chartier, Thierry Caracterisation thermophysique du comportement de materiaux a changementde phase a l echelle macro Societe Francaise Therm., 2010, (ACTN). Abstract | Links @conference{zale2010a,
title = {Caracterisation thermophysique du comportement de materiaux a changementde phase a l echelle macro},
author = {Laurent Zalewski and Annabelle Joulin and Stéphane Lassue and Thierry Chartier},
url = {http://www.sft.asso.fr/Local/sft/dir/user-3775/documents/actes/Congres_2010/communications/163.pdf},
year = {2010},
date = {2010-01-01},
booktitle = {Societe Francaise Therm.},
pages = {6},
abstract = {L'objectif de cet article est de presenter une nouvelle methode de
caracterisation thermique de materiaux contenant des materiaux a
changement de phase a partir de mesures fluxmetriques et de temperatures.
Le dispositif experimental et l'instrumentation utilisee y sont decrits.
Le principal objectif de la methode est la determination la chaleur
latente et les temperatures de changement d'etat du materiau. La
caracterisation permet egalement de determiner les conductivites
et chaleur massique des materiaux en l'etat de mise en oeuvre.},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
L'objectif de cet article est de presenter une nouvelle methode de
caracterisation thermique de materiaux contenant des materiaux a
changement de phase a partir de mesures fluxmetriques et de temperatures.
Le dispositif experimental et l'instrumentation utilisee y sont decrits.
Le principal objectif de la methode est la determination la chaleur
latente et les temperatures de changement d'etat du materiau. La
caracterisation permet egalement de determiner les conductivites
et chaleur massique des materiaux en l'etat de mise en oeuvre. |
2009Journal Article ER5 Auteurs : Cherif, Yassine; Joulin, Annabelle; Zalewski, Laurent; Lassue, Stéphane Experimental and numerical simulation of forced convection and radiationheat fluxes in a horizontal channel , International Journal of ŦhermalSciences, 48, 9,1696-1706, 2009. In: 2009, (ACL). @article{Cherif2009,
title = {Experimental and numerical simulation of forced convection and radiationheat fluxes in a horizontal channel , International Journal of ŦhermalSciences, 48, 9,1696-1706, 2009.},
author = {Yassine Cherif and Annabelle Joulin and Laurent Zalewski and Stéphane Lassue},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2009Journal Article ER5 Auteurs : Joulin, Annabelle; Younsi, Zohir; Zalewski, Laurent; Rousse, D; Lassue, Stéphane A numerical study of the melting of phase change material heatedfrom a vertical wall of a rectangular enclosure, Int. Journal ofComputational Fluid Đynamics, Vol. 23, No. 7, pp553a“566, 200 In: 2009, (ACL). @article{joul2009a,
title = {A numerical study of the melting of phase change material heatedfrom a vertical wall of a rectangular enclosure, Int. Journal ofComputational Fluid Đynamics, Vol. 23, No. 7, pp553a“566, 200},
author = {Annabelle Joulin and Zohir Younsi and Laurent Zalewski and D Rousse and Stéphane Lassue},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2009Conference ER5 Auteurs : Younsi, Zohir; Zalewski, Laurent; Joulin, Annabelle; Lassue, Stéphane; Rousse, Daniel Phase Change Materials: A Numerical Method for the Behaviour Predictions ICTEA 2009, January 12-14, 2009, Abu Dhabi, United Arab Emirates., 2009, (ACTI). @conference{Younsi2009,
title = {Phase Change Materials: A Numerical Method for the Behaviour Predictions},
author = {Zohir Younsi and Laurent Zalewski and Annabelle Joulin and Stéphane Lassue and Daniel Rousse},
year = {2009},
date = {2009-01-01},
booktitle = {ICTEA 2009, January 12-14, 2009, Abu Dhabi, United Arab Emirates.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2009Conference ER5 Auteurs : Younsi, Zohir; Zalewski, Laurent; Joulin, Annabelle; Lassue, Stéphane; Rousse, Daniel Phase Change Materials: Experimental Measurements of Thermophysical Properties ICTEA 2009, January 12-14, 2009, Abu Dhabi, United Arab Emirates., 2009, (ACTI). @conference{Younsi2009a,
title = {Phase Change Materials: Experimental Measurements of Thermophysical Properties},
author = {Zohir Younsi and Laurent Zalewski and Annabelle Joulin and Stéphane Lassue and Daniel Rousse},
year = {2009},
date = {2009-01-01},
booktitle = {ICTEA 2009, January 12-14, 2009, Abu Dhabi, United Arab Emirates.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2008Conference ER5 Auteurs : Younsi, Zohir; Lassue, Stéphane; Zalewski, Laurent; Joulin, Annabelle Thermophysical characterization of phase change materials with heat flux sensors 5th European Thermal-Sciences Conference, Eindhoven, Netherlands, 2008., 2008, (ACTI). @conference{Younsi2008,
title = {Thermophysical characterization of phase change materials with heat flux sensors},
author = {Zohir Younsi and Stéphane Lassue and Laurent Zalewski and Annabelle Joulin},
year = {2008},
date = {2008-01-01},
booktitle = {5th European Thermal-Sciences Conference, Eindhoven, Netherlands, 2008.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2007Conference ER5 Auteurs : Younsi, Zohir; Lassue, Stéphane; Zalewski, Laurent; Joulin, Annabelle Thermophysical characterization of phase change materials for the storage of solar energy in building Heat Transfer in Components and Systems for Sustainable Energy Technologies 18-20 April 2007, Chambery, France., 2007, (ACTI). @conference{Younsi2007,
title = {Thermophysical characterization of phase change materials for the storage of solar energy in building},
author = {Zohir Younsi and Stéphane Lassue and Laurent Zalewski and Annabelle Joulin},
year = {2007},
date = {2007-01-01},
booktitle = {Heat Transfer in Components and Systems for Sustainable Energy Technologies 18-20 April 2007, Chambery, France.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
