Publications

Tout voir...

2018Journal Article Axe 1ER3

Auteurs : Tilioua Amine; Libessart Laurent; Lassue Stéphane

Characterization of the thermal properties of fibrous insulation materials made from recycled textile fibers for building applications : Theoretical and experimental analyses

Applied Thermal Engineering, 142, pp. 56 - 671ISSN: 1359-4311

Abstract | Links

2018Journal Article Axe 1ER3

Auteurs : Bouchedjra M; Kanit T; Boulemia C; Amrouche Abdelwaheb; Belouchrani M E A

Determination of the RVE size for polycrystal metals to predict monotonic and cyclic elastoplastic behavior: Statistical and numerical approach with new criteria

European Journal of Mechanics, A/Solids, 72, pp. 1-151

Links

2017Journal Article Axe 1ER3

Auteurs : Messellek A C; Ouali Ould M; Benabid Y; Amrouche Abdelwaheb; Beloulla A

Material selection process for femoral component of hip prosthesis using finite element analysis and ranking method

Computer Methods in Biomechanics and Biomedical Engineering, 20, pp. 133-1341

Links

2017Journal Article Axe 1ER3

Auteurs : Alatorre N; Ambriz R R; Amrouche Abdelwaheb; García C; Jaramillo D

Fatigue crack growth in Al-Zn-Mg (7075-T651) welds obtained by modified indirect and gas metal arc welding techniques

Journal of Materials Processing Technology, 248, pp. 207-2171

Links

2017Journal Article Axe 1ER3

Auteurs : Messellek A C; Ouali M O; Benabid Y; Amrouche Abdelwaheb; Beloulla A

Design optimization and material selection of acetabular component of hip prosthesis using computational concepts

Computer Methods in Biomechanics and Biomedical Engineering, 20, pp. 131-1321

Links

2016Inproceedings Axe 1ER3

Auteurs : Dairou Mariam Mohaman; Vanhove Yannick; Djelal-Dantec Chafika; Kada Hassina; Gotteland Philippe

Rheological Behaviour Study of Semi Flowable SCC during CFA Pile-Driving Operations

pp. 4291

2016Journal Article Axe 1ER3

Auteurs : Djebli A; Benhamena A; Aminallah L; Aid A; Benguediab M; Amrouche Abdelwaheb

Three-dimensional finite element analysis of fracture behaviour of adhesively bonded single lap-joints

Mechanika, 22(5), pp. 371-3751

Links

2015Journal Article Axe 1ER3

Auteurs : Libessart Laurent; Djelal-Dantec Chafika; de Caro Pascale; Dubois Isabelle

Correlation between adhesion energy of release agents on the formwork and demoulding performances

Construction and Building Materials, 76, pp. 130 - 1391ISSN: 0950-0618

Abstract | Links

2015Book Axe 1ER3

Auteurs : Aid A; Benguediab Mohamed; Amrouche Abdelwaheb

Finite element simulation of fatigue damage accumulation for repaired component by cold expansion method Multiphysics Modelloing and simulation for Systems Design and Monitoring

2015Journal Article Axe 1ER3

Auteurs : Benkabouche S; Guechichi H; Amrouche Abdelwaheb; Benkhettab Mohamed

A modified nonlinear fatigue damage accumulation model under multiaxial variable amplitude loading

International Journal of Mechanical Sciences, 100, pp. 180-1941

Links

2015Journal Article Axe 1ER3

Auteurs : Fares Chahinez; Hemmouche L; Belouchrani M A; Amrouche Abdelwaheb; Chicot D; Puchi-Cabrera E S

Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy

Materials & Design, 86, pp. 723-7341

Links

2015Journal Article Axe 1ER3

Auteurs : Ghemari Zine; Saad Salah; Amrouche Abdelwaheb; Lakehal Abdelaziz

New Model of Piezoelectric Accelerometer Relative Movement Modulus

Transactions of the Institute of Measurement and Control, 37(8), pp. 932-9411

Links

2015Journal Article Axe 1ER3

Auteurs : Rubio-Gonzalez C; Gomez-Rosas G; Ruiz R; Nait-Abdelaziz Moussa; Amrouche Abdelwaheb

Effect of laser shock peening and cold expansion on fatigue performance of open hole samples

Structural Engineering and Mechanics, 53(5), pp. 867-8801

Links

2015Conférence Axe 1ER3

Auteurs : Ziraoui Hichem; Kanit Toufik; Amrouche Abdelwaheb; Naït-Abdelaziz Moussa

Fretting-fatigue simulation of polycrystalline aluminium alloy using crystal plasticity finite element method

International Conference on mechanics of complex solids and fluidsLille,

2015Inproceedings Axe 1ER3

Auteurs : Dairou Mariam Mohaman; Vanhove Yannick; Djelal-Dantec Chafika; Kada Hassina; Gotteland Philippe

Caractérisation en laboratoire de l'enfoncement d'une cage d'armatures dans le béton frais

Rencontres Universitaires de Génie Civil

2015Journal Article Axe 1ER3

Auteurs : Xing Zhi; Djelal-Dantec Chafika; Vanhove Yannick; Kada Hassina

Wood waste in concrete blocks made by vibrocompression

Environmental Processes, 2(1), pp. 223–2321

2014Journal Article Axe 1ER3

Auteurs : Alatorre N; Ambriz Ricardo Raphael; Noureddine B; Amrouche Abdelwaheb; Talha Abderrahim; Jaramillo D

Tensile Properties and Fusion Zone Hardening for GMAW and MIEA Welds of a 7075-T651 Aluminum Alloy

Acta Metallurgica Sinica, 27, pp. 694-7041

Links

2014Journal Article Axe 1ER3

Auteurs : Belloula Amar; Nait-Abdelaziz Moussa; Amrouche Abdelwaheb; Benseddiq Noureddine

Comparison of the cracking energy density and the Smith–Watson–Topper parameters in predicting fretting fatigue lifetime of a steel/aluminum alloy contact

International Journal of Fatigue and Fracture of Engineering Materials and Structures, 37(12), pp. 1355-13661

Links

2014Book Axe 1ER3

Auteurs : Benhamena A; Aminallah A; Baltach L; Aid A; Benguediab Mohamed; Amrouche Abdelwaheb; Benseddiq Noureddine

The fretting fatigue behavior of bolted assemblies Design and Computation of Modern Engineering Materials

Advances Structured Materials,

2014Journal Article Axe 1ER3

Auteurs : Viveros K C; Ambriz R R; Amrouche Abdelwaheb; Talha Abderrahim; García C; Jaramillo D

Cold hole expansion effect on the fatigue crack growth in welds of a 6061-T6 aluminum alloy

Journal of Materials Processing Technology, 214(11), pp. 2606–26161

Links

2014Journal Article Axe 1ER3

Auteurs : Goudjil N; Djelal-Dantec Chafika; Vanhove Yannick; Kada Hassina; Heloun N

Impact of temperature on the demoulding of concrete elements with a polarization process

Construction and Building Materials, 54, pp. 402–4121

Links

2014Journal Article Axe 1ER3

Auteurs : Libessart Laurent; Djelal-Dantec Chafika; de Caro Pascale

Influence of the type of release oil on steel formwork corrosion and facing aesthetics

Construction and Building Materials, 68, pp. 391 - 4011ISSN: 0950-0618

Abstract | Links

2013Journal Article Axe 1ER3

Auteurs : Djebli A; Aid A; Bendouba M; Amrouche Abdelwaheb; Benguediab M; Benseddiq N

A non-linear energy model of fatigue damage accumulation and its verification for Al-2024 aluminum alloy. International Journal of Non-Linear Mechanics. Vol 51, pp 145–151, 201

2013Journal Article Axe 1ER3

Auteurs : Djelal-Dantec Chafika; Vanhove Yannick

Influence of superplaticizien on the properties of the concrete / oil / forarwork interface Construction and Building materials

2013Conférence Axe 1ER3

Auteurs : Belloula Amar; Amrouche Abdelwaheb; Nait-Abdelaziz Moussa; Benseddiq Noureddine

Application of the Cracking Energy Density (CED) multiaxial fatigue criteria for fretting fatigue life prediction: case of mono-contact steel/Al

10th International Conference on MulmtiaxialFatigue and FractureKyoto (Japan),

2013Conférence Axe 1ER3

Auteurs : Belloula Amar; Amrouche Abdelwaheb; Nait-Abdelaziz Moussa; Benseddiq Noureddine

A study on fretting fatigue crack nucleation in 6082-T6 aluminium alloys

7th International Symposium on Fretting FatigueOxford,

2013Journal Article Axe 1ER3

Auteurs : Hemmouche L; Chicot D; Amrouche Abdelwaheb; Iost Alain; Belouchrani M A; Decoopman Xavier; Louis Ghislain; Puchi-Cabrera E S

An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques

Materials Science and Engineering: A, 585, pp. 155 - 1641ISSN: 0921-5093

Links

2013Journal Article Axe 1ER3

Auteurs : Miloudi Abdelkader; Zemri Mokhtar; Benguediab Mohamed; Mazari Mohamed; Amrouche Abdelwaheb

Crack Propagation under Variable Amplitude Loading

Materials Research, 16(5), pp. 1161-11681

Links

2013Journal Article Axe 1ER3

Auteurs : Bal L; Buyle-Bodin Francois

Artificial Neural Network for Predicting Đrying Shrinkage of Concrete,Construction and Building Materials, (2013), pp. 248-254

2012Journal Article Axe 1ER3

Auteurs : Aid Abdelkrim; BENDOUBA M; AMINALLAH L; Amrouche Abdelwaheb; BENSEDDIQ N; BENGUEDIAD M

An equivalent stress process for fatigue life estimation under multiaxialloadings based on a new non linear damage model. Materials Scienceand Engineering A, 538, pp 20 ^a€“ 27. 201

2012Journal Article Axe 1ER3

Auteurs : BENHAMENA A; Amrouche Abdelwaheb; TALHA A; BENSEDDIQ N

Effect of contact forces on fretting fatigue behavior of bolted plates:Numerical and experimental analysis. Ŧribology International. Vol48, pp 237 a 245. 2012.

2012Journal Article Axe 1ER3

Auteurs : Goudjil N; Vanhove Yannick; Djelal-Dantec Chafika; Kada Hassina

Electro-osmosis applied for formwork removal of concrete, Journalof Advanced Concrete Ŧechnology, Vol. 10, 2012, p.301-312.

2012Journal Article Axe 1ER3

Auteurs : Haddi Abdelkader; IMAD A; VEGA G

Ŧhe influence of the drawing parameters and temperature rise on theprediction of chevron crack formation in wire drawing, InternationalJournal of Fracture, 176:171^a€“18

2012Journal Article Axe 1ER3

Auteurs : Haddi Abdelkader; IMAD A; VEGA G

On the Analysis of Đie Wear in Wire-Đrawing Process, Ŧribology Ŧransactions,55:4, 466-472 2012.

2012Journal Article Axe 1ER3

Auteurs : Kesteloot Stéphan; SAADE M; Djelal-Dantec Chafika; BENSLIMANE I; KHOUFACHE N

Utilisation de materiaux composites pour la rehabilitation des ouvragesd assainissement en meuliere, Annales du BTP n 1-2, p. 15-24,Mars 2012

2012Journal Article Axe 1ER3

Auteurs : Semari Z; Aid A; Benhamena A; Amrouche Abdelwaheb; Benguediab M; Sadok A

Effect of Residual Stresses Induced by Cold Expansion on the CrackGrowth in 6082 Aluminum Alloy. Engineering Fracture Mechanics. InPress, Accepted Manuscript, Available online 12 Đecember 2012.

2012Journal Article Axe 1ER3

Auteurs : Vanhove Yannick; Djelal-Dantec Chafika; SCHWENDENMANN G; BRISSET P

Study of Self Consolidating Concrete stability during their placement,Construction and Building Materials, Vol. 35, 2012, p. 101-108.

2011Journal Article Axe 1ER3

Auteurs : Aid Abdelkrim; Amrouche Abdelwaheb; BOUIADJRA B B; BENGUEDIAB M; MESMACQUE G

Fatigue life prediction under variable loading based on a new damagemodel.

Materials and Đesign, 32(1), pp. 183-1911

2011Journal Article Axe 1ER3

Auteurs : BENHAMENA A; AMINALLAH L; BOUIADJRA B B; BENGUEDIAB M; Amrouche Abdelwaheb; BENSEDDIQ N

J integral solution for semi-elliptical surface crack in high densitypoly-ethylene pipe under bending. Materials and Đesign 32 (5),pp. 2561-2569. 2011.

2011Journal Article Axe 1ER3

Auteurs : Guechichi H; Benkabouche S; Amrouche Abdelwaheb; Benkhettab M

A high fatigue life prediction methodology under constant amplitudemultiaxial proportional loadings. Materials Science and EngineeringA 528 (13-14), pp. 4789-4798. 2011.

2011Journal Article Axe 1ER3

Auteurs : Haddi Abdelkader; IMAD A; VEGA G

Analysis of temperature and speed effects on the drawing stress forimproving the wire drawing process, Materials and Đesign 32, 4310-€“431

2011Journal Article Axe 1ER3

Auteurs : Kesteloot Stéphan; Djelal-Dantec Chafika; BENSLIMANE I; BARAKA S

Strengthening of Sewerage Systems with Composites Plates: Numerical,Materials Sciences and Applications, 2011, Vol. 2, N°3, p. 151-16

2011Journal Article Axe 1ER3

Auteurs : Kesteloot Stéphan; Djelal-Dantec Chafika; Benslimane I; Baraka S

Strengthening of Sewerage Systems with Composites Plates: Numerical, Materials Sciences and Applications, 2011, Vol. 2, N°3, p. 151-16

2010Journal Article Axe 1ER3

Auteurs : Ambriz R R; Mesmacque G; Ruiz A; Amrouche Abdelwaheb; Lopez V H

Effect of the welding profile generated by the modified indirect electric arc technique on the fatigue behavior of 6061-Ŧ6 aluminum alloy. Materials Science and Engineering A ,527 (7-8), pp. 2057-2064.

2010Journal Article Axe 1ER3

Auteurs : AMBRIZ R R; MESMACQUE G; RUIZ A; Amrouche Abdelwaheb; LOPEZ V H; BENSEDDIQ N

Fatigue crack growth under a constant amplitude loading of Al-6061-Ŧ6welds obtained by modified indirect electric arc technique. Scienceand Ŧechnology of Welding and Joining. Volume: 15, Issue: 6. pp 514-521.2010.

2010Journal Article Axe 1ER3

Auteurs : AMINALLAH L; MESMACQUE G; SERIER B; Amrouche Abdelwaheb; BENSEDDIQ N

J integral computation for cracks in polypropylene pipes under internal pressure. Key Engineering Materials 417-418, pp. 453-456. 2010

2010Journal Article Axe 1ER3

Auteurs : BENHAMENA A; BOUIADJRA BACHIR B; Amrouche Abdelwaheb; MESMACQUE G; BENSEDDIQ N; BENGUEDIAB M

Ŧhree finite element analysis of semi-elliptical crack in high densitypoly-ethylene pipe subjected to internal pressure. Materials anḌesign 31 (6), pp. 3038-3043. 2010.

2010Journal Article Axe 1ER3

Auteurs : BENHAMENA A; TALHA A; BENSEDDIQ N; Amrouche Abdelwaheb; MESMACQUE G; BENGUEDIAB M

Effect of clamping force on fretting fatigue behaviour of boltedassemblies: Case of couple steel-aluminium. Materials Science andEngineering A 527 (23), pp. 6413-6421. 2010.

2010Journal Article Axe 1ER3

Auteurs : Cadenas-Herrera P; Amrouche Abdelwaheb; Mesmacque G; Jozwiak K; Puchi-cabrera ; Eli S

Influence of residual fatigue damage on the fracture toughness parametersof an AA6082-Ŧ6 aluminum alloy. International Journal of Fatigueand Fractures of Engineering Materials and Structures. 33 (1), pp.54-65. 2010.

2010Journal Article Axe 1ER3

Auteurs : Djelal-Dantec Chafika; Vanhove Yannick; CHAMBELLAN D; BRISSET P

Influence of the thickness of demoulding oils on the aesthetic qualityof facings, Materials and Structures, Vol. 43, N°5, June 2010, p.687-698

2010Journal Article Axe 1ER3

Auteurs : Kesteloot Stéphan; Djelal-Dantec Chafika; BENSLIMANE I; KHOUFACHE N

Stengthening of masonry arches using carbon plates, Constructionand Building Materials

2009Journal Article Axe 1ER3

Auteurs : Aminallah L; Achour T; Bouiadjra Bachir B; Serier B; Amrouche Abdelwaheb; Feaugas ; Benssediq N

Analysis of the distribution of thermal residual stresses in bonded composite repair of metallic aircraft structures. Computational Materials Science, 46 (4), pp. 1023-1027. 2009.

2009Journal Article Axe 1ER3

Auteurs : SANCHEZ-SANTANA U; RUBIO-GONZALEZ C; MESMACQUE G; Amrouche Abdelwaheb

Effect of fatigue damage on the dynamic tensile behavior of aluminiumalloy 6061-Ŧ6 and AISI 4140 Ŧ steel. International Journal of Fatigue.31 (11-12), pp. 1928-1937 .2009.

2009Journal Article Axe 1ER3

Auteurs : Véga Guillaume; Haddi Abdelkader; Imad Abdellatif

Investigation of process parameters effect on the copper-wire drawing

Materials and Đesign, 30, pp. 3308-3312.1

2008Journal Article Axe 1ER3

Auteurs : Amrouche Abdelwaheb; SU M; AID A; MESMACQUE G

Numerical study of the optimum degree of cold expansion: Applicationfor the pre-cracked specimen with the expanded hole at the cracktip. Journal of Materials Processing Ŧechnology, 197, pp 250-254,2008.

2008Journal Article Axe 1ER3

Auteurs : Djelal-Dantec Chafika; Caro De P; Libessart Laurent; Dubois I; Pebere N

Comprehension of demoulding mechanics at the formwork/oil/concreteinterface , Materials and Structure, 41, n3 571-581, April 2008

2008Journal Article Axe 1ER3

Auteurs : Djelal-Dantec Chafika; Vanhove Yannick; Kesteloot Stéphan; HELOUN N

Ultrasonic wave reflection approach to evaluate fresh concrete friction,Journal of Advanced Concrete Ŧechnology, Vol. 6, N°2, june 2008,p.1-

2008Journal Article Axe 1ER3

Auteurs : Djelal-Dantec Chafika; Vanhove Yannick; Kesteloot Stéphan; HELOUN N

Effet de la nature des huiles de demoulage et de la corrosion desparois des coffrages sur l ™esthetique des parements Annalesdu Batiment et des Ŧravaux Publics, N°2, 2008, p.6-

2008Journal Article Axe 1ER3

Auteurs : Guo Ran.; DUAN R; MESMACQUE G; ZHANG L; Amrouche Abdelwaheb; GUO R

Fretting fatigue behavior of riveted Al 6xxx components MaterialsṠcience Engineering A, 483-484, pp 398-401, 2008.

2008Journal Article Axe 1ER3

Auteurs : Guo Ran; Lin En.Q.; Duan R; Mesmacque G; Amrouche Abdelwaheb

Study of fretting fatigue crack initiation for riveted Al 6xxx components.Advanced Materials Research. Vols.33-37, pp 243-248. 2008.

2008Journal Article Axe 1ER3

Auteurs : SANCHEZ-SANTANA U; RUBIO-GONZALEZ C; MESMACQUE G; Amrouche Abdelwaheb; DECOOPMAN X

Đynamic tensile behaviour of materials with previous fatigue damageṀaterials Science Engineering A, 497, pp 51-60, 2008.

2008Journal Article Axe 1ER3

Auteurs : SANCHEZ-SANTANA U; RUBIO-GONZALEZ C; MESMACQUE G; Amrouche Abdelwaheb; DECOOPMAN X

Effect of fatigue damage induced by cyclic plasticity on the dynamictensile behavior of materials. International Journal of Fatigue,30, pp 1708-1719, 2008.

2008Journal Article Axe 1ER3

Auteurs : Su M; Amrouche Abdelwaheb; MESMACQUE G; BENSEDDIQ N

Numerical study of double cold expansion of the hole at crack tipand the influence on the residual stresses field. ComputationalMaterials Science, 41, pp 350-355, 2008.

2008Journal Article Axe 1ER3

Auteurs : Vanhove Yannick; Djelal-Dantec Chafika; Chartier Thierry

Ultrasonic Wave Reflection Approach to Evaluation of Fresh ConcreteFriction

J. Adv. Concr. Technol., 6(2), pp. 253–2601ISSN: 1346-8014

Abstract | Links