Publications

@article{COUTOULY2009,

title = {Optimisation of a paint coating ablation process by CO2 TEA laser:Ŧhermal field modelling and real-time monitoring of the process},

author = {Jean-François Coutouly and Pascal Deprez and Florin Breaban and Jean-Paul Longuemard},

year  = {2009},

date = {2009-01-01},

journal = {,Journal of Materials Processing Ŧechnology},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{BECQUART2009,

title = {Monotonic aspects of the mechanical behaviour of bottom ash frommunicipal solid waste incineration and its potential use for roadconstruction, Waste Management, Vol 29, N4, pp 1320-1329, 2009[Impact Factor ISI WoK JCR 2012 = 2,485] / 1 : INSA d},

author = {Frédéric Becquart and F BERNARD and Nor-Edine Abriak and Rachid Zentar},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Berger2009,

title = {Ħydration of calcium sulfoaluminate cement by a ZnCI2 solution :Investigation at early age, Cement and Concrete Research, N°39,pp 1180-1187 (2009},

author = {S Berger and Cau-Dit C Coumes and Le P Bescop and Denis Damidot},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{BRAKNI2009,

title = {Formulation of artificial aggregates from dredged harbour sedimentsfor coastline stabilization, Environmental Ŧechnology, Vol 30, N°8,pp 849-854, juillet 2009 [Impact Factor ISI WoK JCR 2009 = 0,762]},

author = {S BRAKNI and Nor-Edine Abriak and A HEQUETTE},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{DEPR2009Ab,

title = {Friction and wear studies using Ŧaguchi method: application to thecharacterization of carbon-silicon carbide tribological couples ofautomotive water pump seals.},

author = {Pascal Deprez and Philippe Hivart and J F Coutouly and Etienne Debarre},

year  = {2009},

date = {2009-01-01},

journal = {Advances in Materials Science and Engineering},

volume = {vol. 2009,},

number = {article ID830476,},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{DETRICHE2009b,

title = {Late Ħolocene water level fluctuations of lake Afourgagh (Middle-Atlas,Morocco) inferred from charophyte remains. Palaeogeography, Palaeoclimatology,Palaeoecology, Volume 283(3-4), 134-147},

author = {Sébastien Detriche and J -G BREHERET and SOULIE-M I ~A and L KARRAT and J -J MACAIRE},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Dubois2008,

title = {Ballivy, Ŧhe use of marine sediments as a pavement base material, Waste Management, Vol 29, N4, pp 774-782, 2009. [Impact Factor ISI WoK JCR 2012 = 2,485]},

author = {Vincent Dubois and Nor-Edine Abriak and Rachid Zentar},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Dubois2009,

title = {Ŧhe use of marine sediments as a pavement base material, Source:WASTE MANAGEMENT (FI : 1.338) Volume: 29 Issue: 2 Pages: 774-782Published: FEB 2009 Universite de Sherbrooke (Canada)},

author = {Vincent Dubois and Nor-Edine Abriak and Rachid Zentar},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Fares2009,

title = {Self-consolidating concrete subjected to high temperature: Mechanicaland physicochemical properties, Cement and Concrete Research, 39/12(2009) 1230-1238},

author = {H Fares and A Noumowe and Sébastien Rémond},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{HIVART2009b,

title = {Un attentat a Porrentruy en l'an V de la Republique ou les demeles du volontaire Kusnick avec le citoyen commissaire Roussel. Actesde la Societe Jurassienne d ™Emulation (Suisse), 157-172, (200},

author = {Philippe Hivart},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Lors2009a,

title = {PH variations during growth of Acidithiobacillus thiooxidans in bufferedmedia designed for an assay to evaluate concrete biodeteriorationİnternational Biodegradation and Biodeterioration, 63 : 880-883},

author = {Christine Lors and Hajj M Chehade and Denis Damidot},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Lors2009b,

title = {Benefits of ecotoxicological bioassays in the evaluation of a fieldbiotreatment of PAHs polluted soils. Global NEST, 11 (3) : 251-259.(TOTAL: R&Đ) (ADEME},

author = {Christine Lors and F Perie and C Grand and Denis Damidot},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Neuville2009,

title = {Effect of curing conditions on oilwell cement paste behaviour duringleaching : experimental and modelling approaches, Comptes RendusChimie, Vol 12, pp 511-520 (2009)},

author = {N Neuville and E Lecolier and Georges Aouad and A Rivereau and Denis Damidot},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Petit2009b,

title = {Coupled effect of time and temperature on variations of plastic viscosityof highly flowable mortars, Cement and Concrete Research, vol. 39,n°3, mars 2009, pp. 165-170},

author = {Jean-Yves Petit and K H Khayat and Eric Wirquin},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Sioud2009,

title = {Gas-phase fragmentation study of biotin reagents using electrosprayionization tandem mass spectrometry on a quadrupole orthogonal time-of-flighthybrid instrument. Source: RAPID COMMUNICATIONS IN MASS SPECTROMETRYVolume: 23 Issue: 13 Pages: 1941-1},

author = {S Sioud and Benoit Genestie and F Jahouh},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{ROLI2009A,

title = {Famenno-Carboniferous (370-320 Ma) strike slip tectonics monitoredby syn-kinematic plutons in the French Variscan belt (Massif Armoricainand French Massif Central)},

author = {Vincent Thiery},

year  = {2009},

date = {2009-01-01},

journal = {Bulletin de la societe geologique de France},

volume = {180},

number = {3},

pages = {231-246},

abstract = {The Variscan continental collision has led to the development of large strike-slip shear zones in western Europe. Our study focuses on the regional deformation and shear zone patterns in the Massif Armoricain and the French Massif Central. The synthesis of granite emplacement ages associated to granite deformation fields, allow us to propose a geodynamic model for the tectonic evolution of this part of the Variscan belt between 370 Ma - 320 Ma (Late Devonian - Namurian). After the first steps of the continental subduction-collision, leading to high temperature and anatexis associated with N-S shortening at 380-370 Ma (Frasnian to Famennian), the southern part of the Massif Armoricain and western part of French Massif Central underwent large dextral shearing along N100-N130 trending shear zones up to early Visean time. These large-scale displacements progressively decreased at around 350-340 Ma, during the first emplacements of biotite bearing granites (Moulins-les Aubiers-Gourge massif and Gueret massif intrusions). During middle Visean times, the shortening axis direction rotated towards a NNE-SSW direction implying changes in the regional deformation field. The occurrence of N070-N100 sinistral and N110-N130 dextral conjugate shear zones within leucogranites are related to that time. Finally, new N150-N160 dextral shear zones appeared in middle to late Visean times: as for examples, the Parthenay and the Pradines shear zones in the SE Massif Armoricain and the Millevaches massif, respectively. These shear zones were conjugated to the sinistral N020 Sillon Houiller in the French Massif Central. They reflect large scale brittle continental indentation in the French Variscan belt during the middle to late Visean.},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{THIE2009A,

title = {Visean sinistral wrench faulting along the Sillon Ħouiller in the French Massif Central : Late Variscan tectonic implications},

author = {Vincent Thiery and P Rolin and D Marquer and A Cocherie and C-M Fanning and P Rossi},

year  = {2009},

date = {2009-01-01},

journal = {Bulletin de la societe geologique de France},

volume = {180},

number = {6},

pages = {513-528},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Tran2009a,

title = {Microporomechanical behavior of perfectly straight unidirectionalfiber assembly: Ŧheoretical and experimental^a€?},

author = {T Tran and C Binetruy and S Comas-Cardona and Nor-Edine Abriak},

doi = {doi:10.1016/j.compscitech.2008.10.015},

year  = {2009},

date = {2009-01-01},

journal = {Composites Scienceand Ŧechnology, Volume 69, Issue 2},

volume = {Volume 69, Issue 2},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Turki2009,

title = {Gas-phase fragmentation study of a novel series of synthetic 2-oxo-2Ħ-benzopyrano[2,3-d]pyrimidinederivatives using electrospray ionization tandem mass spectroscopymeasured with a quadrupole orthogonal time-of-flight hybrid instrumentṠource: RAP},

author = {H Turki and Benoit Genestie and El R Gharbi},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{ZDIRI,

title = {Numerical modeling of a Roller Compacted Concrete Pavement underVehicular loading., International Journal of Pavement Research anṬechnology, Vol 2, N5, pp 188-195, 2009},

author = {M ; Zdiri and Nor-Edine Abriak and M Ben Ouzdou and A Loulizi and J Neji},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{ZDIRI2009a,

title = {Modelling of the stresses and strains distribution in an RCC pavementusing the computer code Abaqus, Electronic Journal of StructuralEngineering, n°9, pp 37-44 (ecole de Mines de Đouai) (Civil E,gineeringLaboratory, National Engineering Sch},

author = {M ZDIRI and Nor-Edine Abriak and J NEJI},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{ZDIRI2009b,

title = {Ŧhe use of fluvial and marine sediments in the formulation of RollerCompacted Concrete for use in pavements, Environmental Ŧechnology,Vol 30, N°8, pp 809-815, juillet 2009 [Impact Factor ISI WoK JCR2009 = 0,762]},

author = {M ZDIRI and Nor-Edine Abriak and BEN M OUZDOU and J NEJI},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{ZDIRI2009c,

title = {Prediction and Measurement of the Bending Strength of the RCC, InternationalJournal of Concrete Structures and Materials, Vol 3, N1, pp 57-61,JUIN 2009 - 1 : Ecole des Mines de Đouai, Đepartement GCE - 2 :Civil Engineering Laboratory, National},

author = {M ZDIRI and BEN M OUZDOU and Nor-Edine Abriak and J NEJI},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Zentar2009,

title = {Effects of salts and organic matter on Atterberg limits of dredgedmarine sediments. Applied Clay Science, Vol 42, N3-4, pp 391-397,01/2009. [Impact Factor ISI WoK JCR 2012=2,342]},

author = {Rachid Zentar and Nor-Edine Abriak and Vincent Dubois},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{ZENTAR2009a,

title = {Beneficial use of dredged sediments in public works, EnvironmentalŦechnology, Vol 30, N8, pp 841-847, juillet 2009 [Impact FactorISI WoK JCR 2012 = 1,606] / 1 : LCPC},

author = {Rachid Zentar and Nor-Edine Abriak and Vincent Dubois and M MIRAOUI},

year  = {2009},

date = {2009-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{L14007,

title = {Caractérisation et étude de l'impact sur l'environnement de sédiments dragés dans le nord de la France/ Characterisation and impact study on the environment of sediments dredged in the north of France , Revue Paralia, Vol 2, pp 4.1-4.24, 09/02/},

author = {Rachid Zentar and Nor-Edine Abriak and T Tran Ngoc},

year  = {2009},

date = {2009-01-01},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{L14008,

title = {Etude comparative du comportement physico-mécanique d'un sédiment pollué et non pollué, Đéchet Sciences et Ŧechniques, N°53, pp 13-19, 200},

author = {A Zri and Nor-Edine Abriak and Rachid Zentar},

year  = {2009},

date = {2009-01-01},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Petit2008,

title = {Methodology to couple time - temperature effects on rheology of mortars,American Concrete Institute ^a€“ materials journal- vol. 105, n°4, juillet-aout 2008, pp. 342-},

author = {K H Khayat and Jean-Yves Petit and Eric Wirquin},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{WIRQUIN2008,

title = {Đevelopment of an isothermal plane calorimeter Relating apparentactivation energy of concrete and the corresponding mortar Journalof ASTM International, Volume 5, Issue 1, janvier 2008.},

author = {Eric Wirquin and Hassina Kada and Philippe Herin},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{AOUAD2008,

title = {Interactions between municipal solid waste incinerator bottom ashand bacteria (pseudomonas aeruginosa), Science of the Ŧotal Environment,Vol 393, N°2-3, pp 385-393, 200},

author = {Georges Aouad and J L CROVISIER and Denis Damidot and P STILLE and E HUTCHENS and J MUTTERER and J M MEYER and V GEOFFROY},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{BECQUART2008,

title = {Comportement mecanique au triaxial d'un machefer d'incineration d'ordures menageres, European Journal of Environmental and CivilEngineering, 2008, Volume 12, No. 6/2008, pp. 673-},

author = {Frédéric Becquart},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Brunetaud2008,

title = {Impact of unrestrained Đelayed Ettringite Formation-induced expansionon concrete mechanical properties, Cement Concrete Research, N°38,pp 1343-1348 (2008},

author = {X Brunetaud and L Divet and Denis Damidot},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@book{CART2008A,

title = {Carte geol. France (1/50 000), feuille Aubusson (667). Orleans : BRGM. Notice explicative par Cartannaz C., Rolin, P., Cocherie, A., Ħenry, P., Rossy M. (2008), 106p},

author = {C Cartannaz and R Sonnet and Y Emonin and M Juillerat and J Deprez and Vincent Thiery and N Montaz and J Rot and J-C Binetruy},

year  = {2008},

date = {2008-01-01},

keywords = {ER2},

pubstate = {published},

tppubtype = {book}

}

@article{Damidot2008,

title = {Measurement and simulation of the dissolution rate of cement phasesin conditions close to a cement paste, Annales de Chimie Sciencesdes Materiaux, Vol 33, suppl 1, pp 217-225 (2008)},

author = {Denis Damidot and F Bellmann},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{DESCAMPS2008b,

title = {Manufacture of macroporous ?-tricalcium phosphate bioceramics, JEurop Ceramic Soc,2008, 28(1), 149-157.},

author = {M DESCAMPS and T DUHOO and Francine Monchau and J LU and P HARDOUIN and J C HORNEZ and A LERICHE},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{DETRICHE2008b,

title = {Late holocene palaeohydrology of lake Afourgagh (Middle-Atlas, Morocco)from deposit geometry and facies, 2008. Bulletin de la Societegeologique de France, 179(1), 41-50.},

author = {Sébastien Detriche and J -G BREHERET and H ZARKI and L KARRAT and J -J MACAIRE and M FONTUGNE},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Petit2008b,

title = {Methodology to couple time - temperature effects on rheology of mortars,American Concrete Institute ^a€“ materials journal- vol. 105, n°4, juillet-aout 2008, pp. 342-},

author = {K H Khayat and Jean-Yves Petit and Eric Wirquin},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Remond2008,

title = {Characterization of voids in spherical particle systems by Đelaunayempty spheres , Granular Matter 10/4 (2008) 329-334.},

author = {Sébastien Rémond and J L Gallias and A Mizrahi},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Remond2008a,

title = {Simulation of the packing of granular mixtures of non-convex particlesand voids characterization, Granular Matter 10/3 (2008) 157-170.},

author = {Sébastien Rémond and J L Gallias and A Mizrahi},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@book{ROLI2008A,

title = {Carte geol. France (1/50.000), feuille de FELLETIN (n 691). Orleans: BRGM. 157 p. Notice explicative par Rolin, P., Ŧhiery V., CartannazC., Cocherie, A., Rossy, M., Ħenry, P., Constant, J (2008)},

author = {P Rolin and Vincent Thiery and N Dumont and F Choulet and J Mavel},

year  = {2008},

date = {2008-01-01},

keywords = {ER2},

pubstate = {published},

tppubtype = {book}

}

@article{SEIGNEZ2008b,

title = {Leaching of lead metallurgical slags and pollutant mobility far fromequilibrium conditions, Applied Geochemistry, N°23, pp 3699-3711,02/10/2008. DOI: 10.1016/j.apgeochem.2008.09.00},

author = {N SEIGNEZ and Arnaud Gauthier and David Bulteel and Denis Damidot and J POTDEVIN},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{Siham2008,

title = {Marine dredged sediments as new materials resource for road constructionWaste Management, Volume 28, Issue 5, 2008, Pages 919-928 .},

author = {K Siham and B Fabrice and Nor-Edine Abriak and P Degrugilliers},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{WIRQUIN2008b,

title = {Đevelopment of an isothermal plane calorimeter Relating apparentactivation energy of concrete and the corresponding mortar Journalof ASTM International, Volume 5, Issue 1, janvier 2008.},

author = {Eric Wirquin and Hassina Kada and Philippe Herin},

year  = {2008},

date = {2008-01-01},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{HIVART2007998,

title = {Interfacial indentation test and adhesive fracture characteristics of plasma sprayed cermet Cr3C2/Ni–Cr coatings},

author = {Philippe Hivart and Jacques Crampon},

url = {https://www.sciencedirect.com/science/article/pii/S0167663607000646},

doi = {10.1016/j.mechmat.2007.05.002},

issn = {0167-6636},

year  = {2007},

date = {2007-01-01},

journal = {Mechanics of Materials},

volume = {39},

number = {11},

pages = {998-1005},

abstract = {Thermal spraying is often used to create coatings protecting parts against physico-chemical aggressions or improving superficial mechanical properties. It involves several problems because of the high temperatures of the process: cracks, porosity, coating adhesion. The authors use Vickers interfacial indentation test to characterize adhesive fracture between substrates and coatings. From the Lawn’s relation two curves: load/crack length ratio (P/C3/2) vs crack length (C1/2) and lnP vs lnC are drawn for varying loads. They allow the determination of the type of residual stress, a coating fracture “toughness”/residual stress ratio (KC/σr) characterizing interfacial behavior and may lead, in some cases, to residual stress σr. Influence of superficial remelting by CO2 laser of cermet coating Cr3C2/Ni–Cr deposited on NiCrAlY covered steel and of annealing of Cr3C2/Ni–Cr coated cast iron are then studied. Possibility of reducing residual stress is shown at the same time as the interest of both approaches.},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{HIVART1998195,

title = {Annealing improvement of tribological properties of manganese phosphate coatings},

author = {Philippe Hivart and Benoit Hauw and Jacques Crampon and Jean-Paul Bricout},

url = {https://www.sciencedirect.com/science/article/pii/S0043164898002117},

doi = {10.1016/S0043-1648(98)00211-7},

issn = {0043-1648},

year  = {1998},

date = {1998-01-01},

journal = {Wear},

volume = {219},

number = {2},

pages = {195-204},

abstract = {The authors have studied the tribological behaviour of hureaulite coating previously modified by annealing. Hureaulite is a manganese phosphate used as an anti-friction coating on steel parts in relative motion. This coating possesses no intrinsic lubricating characteristics and must therefore be used in combination with a lubricant. It is the response of the tribosystem ‘coating-lubricant’ which is discussed. Using a friction test to determine the seizure resistance, it is shown that the modifications of the coating (dehydration, new phases and new compounds forming) lead to a great improvement in the resistance to seizure whose value is 5 to 10 times higher according to the annealing temperature. The micrographs show that these modifications generate cracks through the crystals; these cracks are perpendicular to the surface and do not lead to scaling phenomenon. They act like lubricant traps and so delay the seizure. Annealing temperatures ranging from 100 to 700°C and treatment duration from 1 to 100 min are studied. The possibility of reducing temperature while reasonably increasing time is shown so the heat treatment does not affect the steel substrate and could be industrialised.},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{HIVART1997561,

title = {Seizure behaviour of manganese phosphate coatings according to the process conditions},

author = {Philippe Hivart and Benoit Hauw and Jean-Paul Bricout and Jerome Oudin},

url = {https://www.sciencedirect.com/science/article/pii/S0301679X97000194},

doi = {10.1016/S0301-679X(97)00019-4},

issn = {0301-679X},

year  = {1997},

date = {1997-01-01},

journal = {Tribology International},

volume = {30},

number = {8},

pages = {561-570},

abstract = {To analyse accurately the performances of some manganese phosphate coatings, it is proposed to use a friction–seizure test procedure to evaluate the effective phosphate bonding and the lubricant effects. The coating seizure resistance is analysed mainly by considering different temperatures, concentration and dipping time values for the main steps of the whole phosphating process, i.e. degreasing, refining and phosphating. The measures, that are found to be easily reproducible and very sensitive to the treatment parameters, have allowed an easy and objective optimization of the manganese phosphating process. Metallurgical variables, which affect the seizure resistance of manganese phosphate coatings, are also studied by considering the influence of carbon content of a set of plain carbon steels.},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{HIVART199245,

title = {New real-time test for prediction of zinc phosphate/stearate coating breakdown: optimal stearate settling parameters for steel billets in cold forging},

author = {Philippe Hivart and Jean-Paul Bricout and Jerome Oudin},

url = {https://www.sciencedirect.com/science/article/pii/0301679X9290120C},

doi = {10.1016/0301-679X(92)90120-C},

issn = {0301-679X},

year  = {1992},

date = {1992-01-01},

journal = {Tribology International},

volume = {25},

number = {1},

pages = {45-51},

abstract = {The test discussed here quickly reproduces interface pick-up occurrence and degradation of phosphate coatings wich have been dipped in stearate solutions. It involves a rotating cylindrical specimen directly cropped from bar stock of forging plants and phosphate/stearate processed. A constant load is applied on the specimen coating by means of a profiled indenter. Tangential friction force values are measured throughout the rotation time. The stearate settling parameters are analysed in terms of pick-up sensitivity. It is shown that low friction stress and phosphate/stearate coating reliability are mainly due to zinc stearate formation and stearate settling conditions. Secure rules for stearate settling are proposed from the described reference experimental data. The test is found to be a good support for real-time management of phosphate/stearate baths.},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}

@article{BRICOUT19903,

title = {New testing procedure of zinc phosphate coatings involved in cold forging of cylindrical steel billets},

author = {Jean-Paul Bricout and Philippe Hivart and Jerome Oudin and Yves Ravalard},

url = {https://www.sciencedirect.com/science/article/pii/092401369090163O},

doi = {10.1016/0924-0136(90)90163-O},

issn = {0924-0136},

year  = {1990},

date = {1990-01-01},

journal = {Journal of Materials Processing Technology},

volume = {24},

pages = {3-12},

abstract = {Cylindrical cropped billets are often used in the cold forging plants at the beginning of processes and the same cylindrical billets are involved as test specimens in the proposed procedure. On the experimental device, the specimens rotate whilst a semi-cylindrical indenter exerts a constant normal load on it. Tangential force values are measured all along the rotation time. Test adjustable parameters are the normal load exerted, specimen rotation speed and indented radius of curvature. The optimum values of the test parameters are defined in considering the pickup occurrence. Then, the influence of treatments parameters which correspond to different phosphate coatings and lubrication states are analyzed in terms of friction tangential force versus sliding velocities and sliding displacements. The influence of three treatments parameters, acid pickling, phosphating bath and lubricants are enhanced by using the testing procedure for typical 1020 and 4142 carbon steel specimens. Significant tangenital friction force versus sliding length curves are obtained. The proposed test and procedure are able to determine critical friction curves and allow the secure management of both coating treatments and cold forging sequences.},

note = {ACL},

keywords = {ER2},

pubstate = {published},

tppubtype = {article}

}