2012Article de journal ER5 Auteurs : Beriache, Mhamed; Naji, Hassane; Bettahar, Ahmed; Saïdia, Mokhtar Computation of Thermal and Hydraulic Performances of Minichannel Heat Sink with an Impinging Air Jet for Computer Cooling Dans: Acta Polytechnica Hungarica, vol. 9, no. 2, p. 139-153, 2012, (ACL). Liens @article{Beriache2012a,
title = {Computation of Thermal and Hydraulic Performances of Minichannel Heat Sink with an Impinging Air Jet for Computer Cooling},
author = {Mhamed Beriache and Hassane Naji and Ahmed Bettahar and Mokhtar Saïdia},
doi = {wos: 000306096900008},
year = {2012},
date = {2012-01-01},
journal = {Acta Polytechnica Hungarica},
volume = {9},
number = {2},
pages = {139-153},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER5 Auteurs : Braikia, Mohamed; Loukarfi, Larbi; Khelil, Ali; Naji, Hassane Improvement of thermal homogenization using multiple swirling jets Dans: Thermal Science, vol. 16, no. 1, p. 237-248, 2012, (ACL). Résumé | Liens @article{Braikia2012,
title = {Improvement of thermal homogenization using multiple swirling jets},
author = {Mohamed Braikia and Larbi Loukarfi and Ali Khelil and Hassane Naji},
doi = {https://doi.org/10.2298/TSCI101026131B},
year = {2012},
date = {2012-01-01},
journal = {Thermal Science},
volume = {16},
number = {1},
pages = {237-248},
abstract = {The aim of this study is to examine different blowing configurations of multiple swirling jets for use it in terminal units of ventilation applications. The influence of several parameters such as the inclined vanes of diffuser and the sense of rotation of the single or multiple swirling jets, their number and their arrangement on the flow resulting dynamically and thermally is experimentally investigated. Flow rate was adjusted at Reynolds numbers, Re0, ranging from 104 to 30.103. The current study is carried out under uniform heat flux condition for each diffuser at Reynolds number of 30.103, the air being the working fluid. Experiences concerning the fusion of several jets show that the resulting jet is clearly more homogenized under swirling influence. The findings of this study show that the gap between the jets and their sense of rotation relative to the central jet, affects the quality of the homogenization of ambiance. Among the studied different configuration, the one which consists of a swirling central jet controlling the behavior of six swirling jets in counter-rotation is shown to be the most effective in terms of thermal destratification.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
The aim of this study is to examine different blowing configurations of multiple swirling jets for use it in terminal units of ventilation applications. The influence of several parameters such as the inclined vanes of diffuser and the sense of rotation of the single or multiple swirling jets, their number and their arrangement on the flow resulting dynamically and thermally is experimentally investigated. Flow rate was adjusted at Reynolds numbers, Re0, ranging from 104 to 30.103. The current study is carried out under uniform heat flux condition for each diffuser at Reynolds number of 30.103, the air being the working fluid. Experiences concerning the fusion of several jets show that the resulting jet is clearly more homogenized under swirling influence. The findings of this study show that the gap between the jets and their sense of rotation relative to the central jet, affects the quality of the homogenization of ambiance. Among the studied different configuration, the one which consists of a swirling central jet controlling the behavior of six swirling jets in counter-rotation is shown to be the most effective in terms of thermal destratification. |
2012Article de journal ER5 Auteurs : Khelil, Ali; Nechad, Said; Naji, Hassane; Braikia, Larbi Loukarfiand Mhamed.; Beriache, Mhamed Study of the influence of combustion models and kinetic schemes when predicting the diffusion flames Dans: Journal of Mechanics, vol. 28, no. 4, p. 701-713, 2012, (ACL). Résumé | Liens @article{Khelil2012a,
title = {Study of the influence of combustion models and kinetic schemes when predicting the diffusion flames},
author = {Ali Khelil and Said Nechad and Hassane Naji and Larbi Loukarfiand Mhamed. Braikia and Mhamed Beriache},
doi = {https://doi.org/10.1017/jmech.2012.108},
year = {2012},
date = {2012-01-01},
journal = {Journal of Mechanics},
volume = {28},
number = {4},
pages = {701-713},
abstract = {This article aims to study numerically three-dimensional (3D) reactive turbulent flow in a combustion chamber of a gas turbine by solving a steady Reynolds-Averaged Navier-Stokes (RANS) )and energy equations. The Reynolds stress model (RSM) is coupled with the probability density function (PDF), laminar flamelet and Chemistry models to describe the turbulent flow and turbulence–chemistry interaction. Numerical computations are conducted to exhibit thermal and concentration behaviour under a quite number of factors, which influence the combustion process. Their influence are examined and compared favourably with available experimental results. Concentration of some radicals as O and OH are obtained assuming the partial-equilibrium assumption and using a PDF in terms of temperature. The 3D simulations demonstrate that the use of RSM, PDF and flamelet model allow simulating velocity and thermochemical fields.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
This article aims to study numerically three-dimensional (3D) reactive turbulent flow in a combustion chamber of a gas turbine by solving a steady Reynolds-Averaged Navier-Stokes (RANS) )and energy equations. The Reynolds stress model (RSM) is coupled with the probability density function (PDF), laminar flamelet and Chemistry models to describe the turbulent flow and turbulence–chemistry interaction. Numerical computations are conducted to exhibit thermal and concentration behaviour under a quite number of factors, which influence the combustion process. Their influence are examined and compared favourably with available experimental results. Concentration of some radicals as O and OH are obtained assuming the partial-equilibrium assumption and using a PDF in terms of temperature. The 3D simulations demonstrate that the use of RSM, PDF and flamelet model allow simulating velocity and thermochemical fields. |
2012Article de journal ER5 Auteurs : Moufekkir, Fayçal; Moussaoui, Mohammed Amine; Mezrhab, Ahmed; Naji, Hassane; Lemonnier, Denis Numerical prediction of heat transfer by natural convection and radiation in an enclosure filled with an isotropic scattering medium Dans: Journal of Quantitative Spectroscopy and Radiative Transfer, vol. 113, no. 13, p. 1689 - 1704, 2012, ISSN: 0022-4073, (ACL). Résumé | Liens @article{Moufekkir2012d,
title = {Numerical prediction of heat transfer by natural convection and radiation in an enclosure filled with an isotropic scattering medium},
author = {Fayçal Moufekkir and Mohammed Amine Moussaoui and Ahmed Mezrhab and Hassane Naji and Denis Lemonnier},
url = {http://www.sciencedirect.com/science/article/pii/S0022407312002324},
doi = {https://doi.org/10.1016/j.jqsrt.2012.04.017},
issn = {0022-4073},
year = {2012},
date = {2012-01-01},
journal = {Journal of Quantitative Spectroscopy and Radiative Transfer},
volume = {113},
number = {13},
pages = {1689 - 1704},
abstract = {This paper deals with the numerical solution for natural convection and volumetric radiation in an isotropic scattering medium within a heated square cavity using a hybrid thermal lattice Boltzmann method (HTLBM). The multiple relaxation time lattice Boltzmann method (MRT-LBM) has been coupled to the finite difference method (FDM) to solve momentum and energy equations, while the discrete ordinates method (DOM) has been adopted to solve the radiative transfer equation (RTE) using the S8 quadrature. Based on these approaches, the effects of various influencing parameters such as the Rayleigh number (Ra), the wall emissivity (ει), the Planck number (Pl), and the scattering albedo (ω), have been considered. The results presented in terms of isotherms, streamlines and averaged Nusselt number, show that in absence of radiation, the temperature and the flow fields are centro-symmetrics and the cavity core is thermally stratified. However, radiation causes an overall increase in the temperature and velocity gradients along both thermally active walls. The maximum heat transfer rate is obtained when the surfaces of the enclosure walls are regarded as blackbodies. It is also seen that the scattering medium can generate a multicellular flow.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
This paper deals with the numerical solution for natural convection and volumetric radiation in an isotropic scattering medium within a heated square cavity using a hybrid thermal lattice Boltzmann method (HTLBM). The multiple relaxation time lattice Boltzmann method (MRT-LBM) has been coupled to the finite difference method (FDM) to solve momentum and energy equations, while the discrete ordinates method (DOM) has been adopted to solve the radiative transfer equation (RTE) using the S8 quadrature. Based on these approaches, the effects of various influencing parameters such as the Rayleigh number (Ra), the wall emissivity (ει), the Planck number (Pl), and the scattering albedo (ω), have been considered. The results presented in terms of isotherms, streamlines and averaged Nusselt number, show that in absence of radiation, the temperature and the flow fields are centro-symmetrics and the cavity core is thermally stratified. However, radiation causes an overall increase in the temperature and velocity gradients along both thermally active walls. The maximum heat transfer rate is obtained when the surfaces of the enclosure walls are regarded as blackbodies. It is also seen that the scattering medium can generate a multicellular flow. |
2012Article de journal ER5 Auteurs : Moufekkir, Fayçal; Moussaoui, Mohammed Amine; Mezrhab, Ahmed; Lemonnier, Denis; Naji, Hassane MRT-lattice Boltzmann computations of natural convection and volumetric radiation in a tilted square enclosure Dans: International Journal of Thermal Sciences, vol. 54, p. 125 - 141, 2012, ISSN: 1290-0729, (ACL). Liens @article{Moufekkir2012e,
title = {MRT-lattice Boltzmann computations of natural convection and volumetric radiation in a tilted square enclosure},
author = {Fayçal Moufekkir and Mohammed Amine Moussaoui and Ahmed Mezrhab and Denis Lemonnier and Hassane Naji},
url = {http://www.sciencedirect.com/science/article/pii/S1290072911003528},
doi = {https://doi.org/10.1016/j.ijthermalsci.2011.11.022},
issn = {1290-0729},
year = {2012},
date = {2012-01-01},
journal = {International Journal of Thermal Sciences},
volume = {54},
pages = {125 - 141},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER5 Auteurs : Moufekkir, Fayçal; Moussaoui, Mohamed Amine; Mezrhab, Ahmed; Naji, Hassane; Bouzidi, Mhmed Numerical Study of Double Diffusive Convection in presence of Radiating Gas in a Square Cavity Dans: Fluid Dynamics and Materials Processing, vol. 8, no. 2, p. 29-153, 2012, (ACL). Liens @article{Moufekkir2012cb,
title = {Numerical Study of Double Diffusive Convection in presence of Radiating Gas in a Square Cavity},
author = {Fayçal Moufekkir and Mohamed Amine Moussaoui and Ahmed Mezrhab and Hassane Naji and Mhmed Bouzidi},
doi = {https://doi.org/10.3970/fdmp.2012.008.129},
year = {2012},
date = {2012-01-01},
journal = {Fluid Dynamics and Materials Processing},
volume = {8},
number = {2},
pages = {29-153},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER5 Auteurs : Chauchois, Alexis; Antczak, Emmanuel; Defer, Didier; Brachelet, Franck In situ characterization of thermophysical properties of a soil - Measurement and monitoring of soil water content with a thermal prob Dans: J. Renewable Sustainable Energy, vol. 4, p. 17 pages., 2012, (ACL). Résumé | Liens @article{chau2012ab,
title = {In situ characterization of thermophysical properties of a soil - Measurement and monitoring of soil water content with a thermal prob},
author = {Alexis Chauchois and Emmanuel Antczak and Didier Defer and Franck Brachelet},
url = {http://scitation.aip.org/content/aip/journal/jrse/4/4/10.1063/1.4737138},
doi = {10.1063/1.4737138},
year = {2012},
date = {2012-01-01},
journal = {J. Renewable Sustainable Energy},
volume = {4},
pages = {17 pages.},
abstract = {A. Chauchois, E. Antczak, D. Defer, F. Brachelet, « In situ characterization
of thermophysical properties of a soil – Measurement and monitoring
of soil water content with a thermal probe », J. Renewable Sustainable
Energy 4, 043106 (2012); 17 pages.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
A. Chauchois, E. Antczak, D. Defer, F. Brachelet, « In situ characterization
of thermophysical properties of a soil – Measurement and monitoring
of soil water content with a thermal probe », J. Renewable Sustainable
Energy 4, 043106 (2012); 17 pages. |
2012Article de journal ER5 Auteurs : Chaaban, F; Darwishe, H; Battiau-Queney, Y; Louche, B; Masson, E; Khattabi, Jamal El; Carlier, E Using ArcGIS (R) Modelbuilder and Aerial Photographs to Measure Coastline Retreat and Advance: North of France Dans: Journal of Coastal Research, vol. 28, no. 6, p. 1567–1579, 2012, (ACL). Résumé | Liens @article{,
title = {Using ArcGIS (R) Modelbuilder and Aerial Photographs to Measure Coastline Retreat and Advance: North of France},
author = {F Chaaban and H Darwishe and Y Battiau-Queney and B Louche and E Masson and Jamal El Khattabi and E Carlier},
doi = {10.2112/JCOASTRES-D-11-00054.1},
year = {2012},
date = {2012-11-01},
journal = {Journal of Coastal Research},
volume = {28},
number = {6},
pages = {1567--1579},
abstract = {Chaaban, F.; Darwishe, H.; Battiau-Queney, Y.; Louche, B.; Masson, E.; El Khattabi, J., and earlier, E., 2012. Using ArcGIS (R) Modelbuilder and aerial photographs to measure coastline retreat and advance: North of France. Journal of Coastal Research, 28(6), 1567-1579. Coconut Creek (Florida), ISSN 0749-0208. Coastal areas are naturally dynamic with changes occurring over periods of time. When the shoreline moves landward, coastal erosion becomes a serious problem, and the rate of change has to be calculated. Coastline retreat is one of the best indicators of coastal erosion. Here, the geographic information systems (GIS) platform (ArcGIS (R) 9.3.1; Esri software) is used to study the long-term (last 59 years) shoreline change in the area of Hardelot-Plage and Sainte Cecile-Plage (a north-south 14-km-long beach), in northern France. The primary aim of this study was to develop a methodology for calculating shoreline change using ArcGIS Modelbuilder and aerial photographs. Changes in 14 coastlines over the course of 59 years (from 1946 to 2005) were digitized and represented in ArcGIS 9.3.1 platform. Two hundred and ninety-two transects perpendicular to the shoreline were used to estimate coastal erosion and deduce the recession rate. The Modelbuilders (two models) created and used in this work are generic models that can be used for geoprocessing linear features. One model can be used to ascertain the intersection between linear features (transects and shorelines), adding a new field to the attribute table and calculating the geometry of the intersection points. A second model can housed to add a new field to the attribute table and calculate the distance on the transect lines between the linear reference feature and other linear features, in this study between the baseline (established adjacent to the series of shoreline positions) and the shoreline. The results show that the shoreline change rates between 1947 and 2005 along the Hardelot and Sainte Cecile coasts are generally negative; 82.2% of transects have values less than zero (i.e., retreat) and outside of the error margin (+/- 10 m). Nevertheless the shoreline change shows successive phases of advance and retreat over the same period.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
Chaaban, F.; Darwishe, H.; Battiau-Queney, Y.; Louche, B.; Masson, E.; El Khattabi, J., and earlier, E., 2012. Using ArcGIS (R) Modelbuilder and aerial photographs to measure coastline retreat and advance: North of France. Journal of Coastal Research, 28(6), 1567-1579. Coconut Creek (Florida), ISSN 0749-0208. Coastal areas are naturally dynamic with changes occurring over periods of time. When the shoreline moves landward, coastal erosion becomes a serious problem, and the rate of change has to be calculated. Coastline retreat is one of the best indicators of coastal erosion. Here, the geographic information systems (GIS) platform (ArcGIS (R) 9.3.1; Esri software) is used to study the long-term (last 59 years) shoreline change in the area of Hardelot-Plage and Sainte Cecile-Plage (a north-south 14-km-long beach), in northern France. The primary aim of this study was to develop a methodology for calculating shoreline change using ArcGIS Modelbuilder and aerial photographs. Changes in 14 coastlines over the course of 59 years (from 1946 to 2005) were digitized and represented in ArcGIS 9.3.1 platform. Two hundred and ninety-two transects perpendicular to the shoreline were used to estimate coastal erosion and deduce the recession rate. The Modelbuilders (two models) created and used in this work are generic models that can be used for geoprocessing linear features. One model can be used to ascertain the intersection between linear features (transects and shorelines), adding a new field to the attribute table and calculating the geometry of the intersection points. A second model can housed to add a new field to the attribute table and calculate the distance on the transect lines between the linear reference feature and other linear features, in this study between the baseline (established adjacent to the series of shoreline positions) and the shoreline. The results show that the shoreline change rates between 1947 and 2005 along the Hardelot and Sainte Cecile coasts are generally negative; 82.2% of transects have values less than zero (i.e., retreat) and outside of the error margin (+/- 10 m). Nevertheless the shoreline change shows successive phases of advance and retreat over the same period. |
2012Article de journal ER5 Auteurs : Chaaban, F; Darwishe, H; Louche, B; Battiau-Queney, Y; Masson, E; Khattabi, Jamal El; Carlier, E Geographical information system approach for environmental management in coastal area (Hardelot-Plage, France) Dans: Environmental Earth Sciences, vol. 65, no. 1, p. 183–193, 2012, (ACL). Résumé | Liens @article{,
title = {Geographical information system approach for environmental management in coastal area (Hardelot-Plage, France)},
author = {F Chaaban and H Darwishe and B Louche and Y Battiau-Queney and E Masson and Jamal El Khattabi and E Carlier},
doi = {10.1007/s12665-011-1080-2},
year = {2012},
date = {2012-01-01},
journal = {Environmental Earth Sciences},
volume = {65},
number = {1},
pages = {183--193},
abstract = {The use of geographic information system (GIS) minimizes the effort and improves the efficiency of numerical models. The GIS provides a platform for high capacity collection, management, manipulation, analysis, modeling and display of spatial data. The conceptual model is created using GIS objects including points, arcs and polygons so that it can accurately represent real world condition. According to the research problem, the geographical model is based on Hypergraph Based Data Structure method, and a conceptual data model has been created from which a physical data model was elaborated in ArcGIS9.3 platform. The groundwater modeling system (GMS) provides a powerful tool for hydrodynamics modeling and it is able to solve complex problems such as the groundwater flow and seawater intrusion. The sand-dune system of Hardelot-Plage (North of France) suffers from a lack of well-developed foredune. This problem is linked to the almost constant saturation of beach sand which is the potential source of dune nourishment. In the south of Hardelot, the coastline is slowly, but constantly retreating. To remedy this situation, a coupling between a GIS and GMS was adopted, in order to find the possible scenarios which could lower the piezometric surface in the concerned area and allow dune nourishment again. The GMS used supports the Modflow-2000 code. A direct approach to designing Modflow finite difference model is tedious and less intuitive, specifically for complex boundary and initial conditions. Therefore, a Modflow model can be developed either using a grid or conceptual model approach. The preparation of input data modeling is tedious and takes a long time. The model created in GMS was calibrated against the historical and observed water level data for 1995-2006. Then a hydrodispersive model (MT3d code in GMS) was launched for evaluating sea-water intrusion. The model was run to generate groundwater and salt concentration scenario during pumping tests.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
The use of geographic information system (GIS) minimizes the effort and improves the efficiency of numerical models. The GIS provides a platform for high capacity collection, management, manipulation, analysis, modeling and display of spatial data. The conceptual model is created using GIS objects including points, arcs and polygons so that it can accurately represent real world condition. According to the research problem, the geographical model is based on Hypergraph Based Data Structure method, and a conceptual data model has been created from which a physical data model was elaborated in ArcGIS9.3 platform. The groundwater modeling system (GMS) provides a powerful tool for hydrodynamics modeling and it is able to solve complex problems such as the groundwater flow and seawater intrusion. The sand-dune system of Hardelot-Plage (North of France) suffers from a lack of well-developed foredune. This problem is linked to the almost constant saturation of beach sand which is the potential source of dune nourishment. In the south of Hardelot, the coastline is slowly, but constantly retreating. To remedy this situation, a coupling between a GIS and GMS was adopted, in order to find the possible scenarios which could lower the piezometric surface in the concerned area and allow dune nourishment again. The GMS used supports the Modflow-2000 code. A direct approach to designing Modflow finite difference model is tedious and less intuitive, specifically for complex boundary and initial conditions. Therefore, a Modflow model can be developed either using a grid or conceptual model approach. The preparation of input data modeling is tedious and takes a long time. The model created in GMS was calibrated against the historical and observed water level data for 1995-2006. Then a hydrodispersive model (MT3d code in GMS) was launched for evaluating sea-water intrusion. The model was run to generate groundwater and salt concentration scenario during pumping tests. |
2011Article de journal ER5 Auteurs : Beriache, M; Bettahar, A; Loukarfi, L; A, Mokhtar Sa L; Naji, Hassane Numerical study on hydraulic and thermal characteristics of a minichannelheat sink with impinging air flow^a€?. Mechanika, vol. 17(2), pp:156-161,2011, doi: 10.5755/j01.mech.17.2.33 Dans: 2011, (ACL). @article{beri2011a,
title = {Numerical study on hydraulic and thermal characteristics of a minichannelheat sink with impinging air flow^a€?. Mechanika, vol. 17(2), pp:156-161,2011, doi: 10.5755/j01.mech.17.2.33},
author = {M Beriache and A Bettahar and L Loukarfi and Mokhtar Sa L ~A and Hassane Naji},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Conférence ER5 Auteurs : Brachelet, Franck; Du, Tao; Defer, Didier; Antczak, Emmanuel Détermination de la diffusivité thermique et de l épaisseur de béton d enrobage par thermographie infrarouge XXIXèmes rencontres universitaires de Génie Civil, Tlemcen, Algérie, 29-31 mai 2011, 2011, (ACTN). @conference{brac2011a,
title = {Détermination de la diffusivité thermique et de l épaisseur de béton d enrobage par thermographie infrarouge},
author = {Franck Brachelet and Tao Du and Didier Defer and Emmanuel Antczak},
year = {2011},
date = {2011-01-01},
booktitle = {XXIXèmes rencontres universitaires de Génie Civil, Tlemcen, Algérie, 29-31 mai 2011},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2011Conférence ER5 Auteurs : Du, Tao; Brachelet, Franck; Defer, Didier; Antczak, Emmanuel Quantitative Evaluation of Ŧhermal Điffusivity and Ŧhickness of Mortar Cover using Induction Ŧhermography Nondestructive testing of materials and structures, Istanbul, Turkey, May 15-18, 2011, vol. V 6, 2011, (ACTI). @conference{DUTA2011A,
title = {Quantitative Evaluation of Ŧhermal Điffusivity and Ŧhickness of Mortar Cover using Induction Ŧhermography},
author = {Tao Du and Franck Brachelet and Didier Defer and Emmanuel Antczak},
editor = {New York : Springer},
year = {2011},
date = {2011-01-01},
booktitle = {Nondestructive testing of materials and structures, Istanbul, Turkey, May 15-18, 2011},
volume = {V 6},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2011Article de journal ER5 Auteurs : Dutil, Y; Rousse, D; Salah, N Ben; Lassue, Stéphane; Zalewski, Laurent A review on phase-change materials: Mathematical modeling and simulations,Renewable and Sustainable Energy Reviews, Volume 15, Issue 1, January2011, Pages 112-130 Dans: 2011, (ACL). @article{DUTIL2011,
title = {A review on phase-change materials: Mathematical modeling and simulations,Renewable and Sustainable Energy Reviews, Volume 15, Issue 1, January2011, Pages 112-130},
author = {Y Dutil and D Rousse and N Ben Salah and Stéphane Lassue and Laurent Zalewski},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER5 Auteurs : Joulin, Annabelle; Younsi, Zohir; Zalewski, Laurent; Lassue, Stéphane; Rousse, D; Cavrot, J-P Experimental and numerical investigation of phase change materials : thermal energy storage and release, Applied Energy, Volume 88, Issue 7, July 2011, Pages 2454-2462 Dans: 2011, (ACL). @article{joul2011a,
title = {Experimental and numerical investigation of phase change materials : thermal energy storage and release, Applied Energy, Volume 88, Issue 7, July 2011, Pages 2454-2462},
author = {Annabelle Joulin and Zohir Younsi and Laurent Zalewski and Stéphane Lassue and D Rousse and J-P Cavrot},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER5 Auteurs : Leblanc, Alexandre; Lavie, Antoine; ING, R K Ŧhe method of fundamental solutions for the impulse responses reconstructionin arbitrary shaped plates, Acta Acustica united with Acustica, 97,919-925 (2011). Dans: 2011, (ACL). @article{LEBLANC2011,
title = {Ŧhe method of fundamental solutions for the impulse responses reconstructionin arbitrary shaped plates, Acta Acustica united with Acustica, 97,919-925 (2011).},
author = {Alexandre Leblanc and Antoine Lavie and R K ING},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER5 Auteurs : Melian, C; Deprez, Pascal; Breaban, Florin; Lobontiu, M Study on influence shape of technical parameters regarding the glass laser engraving Dans: Interenational Journal of Modern Manufacturing, vol. 2, p. 73-78, 2011, (ACL). @article{meli2011a,
title = {Study on influence shape of technical parameters regarding the glass laser engraving},
author = {C Melian and Pascal Deprez and Florin Breaban and M Lobontiu},
year = {2011},
date = {2011-01-01},
journal = {Interenational Journal of Modern Manufacturing},
volume = {2},
pages = {73-78},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER5 Auteurs : Rousse, D; Asllanaj, F; Salah, N Ben; Lassue, Stéphane A Consistent Interpolation Function for the Solution of RadiativeŦransfer on Ŧriangular Meshes, ”Validation, Numerical Ħeat Ŧransfer,Part B: Fundamentals: An International Journal of Computation anṂethodology, 1521-0626, Volume 59, Issue 2, Dans: 2011, (ACL). @article{ROUSSE2011,
title = {A Consistent Interpolation Function for the Solution of RadiativeŦransfer on Ŧriangular Meshes, ”Validation, Numerical Ħeat Ŧransfer,Part B: Fundamentals: An International Journal of Computation anṂethodology, 1521-0626, Volume 59, Issue 2,},
author = {D Rousse and F Asllanaj and N Ben Salah and Stéphane Lassue},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER5 Auteurs : Younsi, Zohir; Lassue, Stéphane; Zalewski, Laurent; Joulin, Annabelle Experimental and numerical investigation of phase change materials: thermal energy storage and release, Applied Energy 88 (2011)2454-2462. Dans: 2011, (ACL). @article{Younsi2011,
title = {Experimental and numerical investigation of phase change materials: thermal energy storage and release, Applied Energy 88 (2011)2454-2462.},
author = {Zohir Younsi and Stéphane Lassue and Laurent Zalewski and Annabelle Joulin},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER5 Auteurs : Beriache, Mhamed; Bettahar, Ahmed; Loukarfi, Larbi; Saïdia, Mokhtar; Naji, Hassane Numerical study on hydraulic and thermal characteristics of a minichannel heat sink with impinging air flow Dans: Mechanics, vol. 17, no. 2, p. 156-161, 2011, ISSN: 2029-6983, (ACL). Liens @article{Beriache2011,
title = {Numerical study on hydraulic and thermal characteristics of a minichannel heat sink with impinging air flow},
author = {Mhamed Beriache and Ahmed Bettahar and Larbi Loukarfi and Mokhtar Saïdia and Hassane Naji},
doi = {http://dx.doi.org/10.5755/j01.mech.17.2.331},
issn = {2029-6983},
year = {2011},
date = {2011-01-01},
journal = {Mechanics},
volume = {17},
number = {2},
pages = {156-161},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER5 Auteurs : Moussaoui, Mohammed Amine; Mezrhab, Ahmed; Naji, Hassane A computation of flow and heat transfer past three heated cylinders in a vee shape by a double distribution MRT thermal lattice Boltzmann model Dans: International Journal of Thermal Sciences, vol. 50, no. 8, p. 1532 - 1542, 2011, ISSN: 1290-0729, (ACL). Liens @article{Moussaoui2011,
title = {A computation of flow and heat transfer past three heated cylinders in a vee shape by a double distribution MRT thermal lattice Boltzmann model},
author = {Mohammed Amine Moussaoui and Ahmed Mezrhab and Hassane Naji},
url = {http://www.sciencedirect.com/science/article/pii/S129007291100086X},
doi = {https://doi.org/10.1016/j.ijthermalsci.2011.03.011},
issn = {1290-0729},
year = {2011},
date = {2011-01-01},
journal = {International Journal of Thermal Sciences},
volume = {50},
number = {8},
pages = {1532 - 1542},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER5 Auteurs : Chauchois, Alexis; Antczak, Emmanuel; Defer, Didier; Carpentier, Olivier Formalism of thermal waves applied to the characterization of materialsthermal effusivity, Review of Scientific Instruments, 2011 Dans: Review of Scientific Instruments, vol. Vol.82 - issue 7, p. pp. 074902-1 / 07490, 2011, (ACL). Liens @article{chau2011ab,
title = {Formalism of thermal waves applied to the characterization of materialsthermal effusivity, Review of Scientific Instruments, 2011},
author = {Alexis Chauchois and Emmanuel Antczak and Didier Defer and Olivier Carpentier},
url = {http://www.ncbi.nlm.nih.gov/pubmed/21806216},
doi = {10.1063/1.3600899},
year = {2011},
date = {2011-01-01},
journal = {Review of Scientific Instruments},
volume = {Vol.82 - issue 7},
pages = {pp. 074902-1 / 07490},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Antczak, Emmanuel; Defer, Didier; Chartier, Thierry Ŧhermal characteristics in situ monitoring of detached house wallconstituted by raw clay Dans: European Journal Environment Civil Engineering., vol. 14, no. 5, p. 653–667, 2010, ISSN: 1964-8189, (ACL). Liens @article{antz2010a,
title = {Ŧhermal characteristics in situ monitoring of detached house wallconstituted by raw clay},
author = {Emmanuel Antczak and Didier Defer and Thierry Chartier},
url = {http://dx.doi.org/10.1080/19648189.2010.9693252},
doi = {10.1080/19648189.2010.9693252},
issn = {1964-8189},
year = {2010},
date = {2010-05-01},
journal = {European Journal Environment Civil Engineering.},
volume = {14},
number = {5},
pages = {653--667},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Debuchy, Roger; Nour, F Abdel; Bois, G An Analytical Modeling of the Central Core Flow in a Rotor-StatorSystem With Several Pre-swirl Conditions., J. Fluids Eng. - Vol 132,Issue 6, DOI:10.1115/1.4001576 - June 2010. Dans: 2010, (ACL). @article{DEBUCHY2010,
title = {An Analytical Modeling of the Central Core Flow in a Rotor-StatorSystem With Several Pre-swirl Conditions., J. Fluids Eng. - Vol 132,Issue 6, DOI:10.1115/1.4001576 - June 2010.},
author = {Roger Debuchy and F Abdel Nour and G Bois},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : ETAIX, N; Leblanc, Alexandre; FINK, M; ING, R K Ŧhickness or phase velocity measurements using the Green's functioncomparison method, IEEE Ŧransactions on Ultrasonics, Ferroelectricsand Frequency Control, 57(8), 1804-1812 Dans: 2010, (ACL). @article{ETAIX2010,
title = {Ŧhickness or phase velocity measurements using the Green's functioncomparison method, IEEE Ŧransactions on Ultrasonics, Ferroelectricsand Frequency Control, 57(8), 1804-1812},
author = {N ETAIX and Alexandre Leblanc and M FINK and R K ING},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Farh, El L; Mezrhab, A; Naji, Hassane; Lemonnier, D Computation of Surface Radiation and Natural Convection in a Ħeated Ħorticultural Greenhouse?, Applied Energy (AE), vol. 87, No. 3,2010, pp: 894-900, doi: 10.1016/j.apenergy.2009.05.017. Dans: 2010, (ACL). @article{Mezrhab2010a,
title = {Computation of Surface Radiation and Natural Convection in a Ħeated Ħorticultural Greenhouse?, Applied Energy (AE), vol. 87, No. 3,2010, pp: 894-900, doi: 10.1016/j.apenergy.2009.05.017.},
author = {El L Farh and A Mezrhab and Hassane Naji and D Lemonnier},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : ING, R K; ETAIX, N; Leblanc, Alexandre; Fink, M Measurement of thickness or plate velocity using ambient vibrations,J. Acoust. Soc. Am., 127(6), 252-257 (2010) Dans: 2010, (ACL). @article{ING2010,
title = {Measurement of thickness or plate velocity using ambient vibrations,J. Acoust. Soc. Am., 127(6), 252-257 (2010)},
author = {R K ING and N ETAIX and Alexandre Leblanc and M Fink},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Leblanc, Alexandre; ING, R K; Lavie, Antoine A wave superposition method based on monopole sources with uniquesolution for all wave numbers, Acta Acustica united with Acustica,96, 125-130 (2010). Dans: 2010, (ACL). @article{LEBLANC2010,
title = {A wave superposition method based on monopole sources with uniquesolution for all wave numbers, Acta Acustica united with Acustica,96, 125-130 (2010).},
author = {Alexandre Leblanc and R K ING and Antoine Lavie},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Mezrhab, A; Moussaoui, M A; Jami, M; Naji, Hassane; Bouzidi, M Đouble MRT thermal lattice Boltzmann method for simulating convectiveflows^a€?, Physics letters A (PLA), vol. 374, No. 34, pp: 3499-3507,2010, doi: 10.1016/j.physleta.2010.06.05 Dans: 2010, (ACL). @article{Mezrhab2010b,
title = {Đouble MRT thermal lattice Boltzmann method for simulating convectiveflows^a€?, Physics letters A (PLA), vol. 374, No. 34, pp: 3499-3507,2010, doi: 10.1016/j.physleta.2010.06.05},
author = {A Mezrhab and M A Moussaoui and M Jami and Hassane Naji and M Bouzidi},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Moussaoui, M A; Jami, M; Mezrhab, A; Naji, Hassane Multi-relaxation-time lattice Boltzmann computation of channel flowpast a square cylinder with upstream control bi-partition^a€?, Int.J. for Numerical Methods in Fluids, vol. 64, N° 6, pp: 591-608 2010,doi: 10.1002/fld.215 Dans: 2010, (ACL). @article{Moussaoui2010a,
title = {Multi-relaxation-time lattice Boltzmann computation of channel flowpast a square cylinder with upstream control bi-partition^a€?, Int.J. for Numerical Methods in Fluids, vol. 64, N° 6, pp: 591-608 2010,doi: 10.1002/fld.215},
author = {M A Moussaoui and M Jami and A Mezrhab and Hassane Naji},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Younsi, Zohir; Lassue, Stéphane; Zalewski, Laurent; Joulin, Annabelle A novel technique for the experimental thermophysical characterization of phase change materials, International Journal of Ŧhermophysics, Springer Science+Business Media, LLC 2010. Dans: 2010, (ACL). @article{Younsi2010,
title = {A novel technique for the experimental thermophysical characterization of phase change materials, International Journal of Ŧhermophysics, Springer Science+Business Media, LLC 2010.},
author = {Zohir Younsi and Stéphane Lassue and Laurent Zalewski and Annabelle Joulin},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Conférence ER5 Auteurs : Zalewski, Laurent; Joulin, Annabelle; Lassue, Stéphane; Chartier, Thierry Caracterisation thermophysique du comportement de materiaux a changementde phase a l echelle macro Societe Francaise Therm., 2010, (ACTN). Résumé | Liens @conference{zale2010a,
title = {Caracterisation thermophysique du comportement de materiaux a changementde phase a l echelle macro},
author = {Laurent Zalewski and Annabelle Joulin and Stéphane Lassue and Thierry Chartier},
url = {http://www.sft.asso.fr/Local/sft/dir/user-3775/documents/actes/Congres_2010/communications/163.pdf},
year = {2010},
date = {2010-01-01},
booktitle = {Societe Francaise Therm.},
pages = {6},
abstract = {L'objectif de cet article est de presenter une nouvelle methode de
caracterisation thermique de materiaux contenant des materiaux a
changement de phase a partir de mesures fluxmetriques et de temperatures.
Le dispositif experimental et l'instrumentation utilisee y sont decrits.
Le principal objectif de la methode est la determination la chaleur
latente et les temperatures de changement d'etat du materiau. La
caracterisation permet egalement de determiner les conductivites
et chaleur massique des materiaux en l'etat de mise en oeuvre.},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
L'objectif de cet article est de presenter une nouvelle methode de
caracterisation thermique de materiaux contenant des materiaux a
changement de phase a partir de mesures fluxmetriques et de temperatures.
Le dispositif experimental et l'instrumentation utilisee y sont decrits.
Le principal objectif de la methode est la determination la chaleur
latente et les temperatures de changement d'etat du materiau. La
caracterisation permet egalement de determiner les conductivites
et chaleur massique des materiaux en l'etat de mise en oeuvre. |
2010Article de journal ER5 Auteurs : Zalewski, Laurent; Lassue, Stéphane; Rousse, D; Boukhalfa, K Experimental and numerical characterization of thermal bridges inprefabricated building walls, Energy Conversion and Management, Volume51, Issue 12, 2010, Pages 2869-2877 Dans: 2010, (ACL). @article{zale2010b,
title = {Experimental and numerical characterization of thermal bridges inprefabricated building walls, Energy Conversion and Management, Volume51, Issue 12, 2010, Pages 2869-2877},
author = {Laurent Zalewski and Stéphane Lassue and D Rousse and K Boukhalfa},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Leblanc, Alexandre; Kiri, Ros; Lavie, Antoine A wave superposition method based on monopole sources with unique solution for all wave numbers Dans: Acta Acustica united with Acustica, vol. 96, no. 1, p. 125–130, 2010, (ACL). @article{LeblancKiriLavie2010,
title = {A wave superposition method based on monopole sources with unique solution for all wave numbers},
author = {Alexandre Leblanc and Ros Kiri and Antoine Lavie},
year = {2010},
date = {2010-01-01},
journal = {Acta Acustica united with Acustica},
volume = {96},
number = {1},
pages = {125--130},
publisher = {S. Hirzel Verlag},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Etaix, Nicolas; Leblanc, Alexandre; Fink, Mathias; others, Thickness or phase velocity measurements using the Green's function comparison method Dans: Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Transactions on, vol. 57, no. 8, p. 18804–1812, 2010, (ACL). @article{EtaixLeblancFinkEtAl2010,
title = {Thickness or phase velocity measurements using the Green's function comparison method},
author = {Nicolas Etaix and Alexandre Leblanc and Mathias Fink and others},
year = {2010},
date = {2010-01-01},
journal = {Ultrasonics, Ferroelectrics, and Frequency Control, IEEE Transactions on},
volume = {57},
number = {8},
pages = {18804--1812},
publisher = {IEEE},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Wu, Tingting; Antczak, Emmanuel; Defer, Didier; Chartier, Thierry Thermal characteristics in situ monitoring of detached house wall constituted by raw clay Dans: European Journal of Environmental and Civil Engineering, vol. 14, no. 5, p. 653–667, 2010, (ACL). @article{wu2010a,
title = {Thermal characteristics in situ monitoring of detached house wall constituted by raw clay},
author = {Tingting Wu and Emmanuel Antczak and Didier Defer and Thierry Chartier},
year = {2010},
date = {2010-01-01},
journal = {European Journal of Environmental and Civil Engineering},
volume = {14},
number = {5},
pages = {653--667},
publisher = {Taylor & Francis},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Lavie, Antoine; Leblanc, Alexandre Integral equation methods with unique solution for all wavenumbers applied to acoustic radiation Dans: European Journal of Computational Mechanics, Computational methods for coupled fluid and structural problems, vol. 19 (5-6-7), p. 125-130, 2010, (ACLN). @article{Lavie2010b,
title = {Integral equation methods with unique solution for all wavenumbers applied to acoustic radiation},
author = {Antoine Lavie and Alexandre Leblanc},
year = {2010},
date = {2010-01-01},
journal = {European Journal of Computational Mechanics, Computational methods for coupled fluid and structural problems},
volume = {19 (5-6-7)},
pages = {125-130},
note = {ACLN},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Conférence ER5 Auteurs : Lavie, Antoine; Leblanc, Alexandre Numerical investigations of a Helmholtz equation with unique solution for all wavenumber applied to acoustic radiation EAA EUROREGIO Congress on Sound and Vibration, CD-ROM, Ljubljana, Slovénie, 2010, (ACTI). @conference{Lavie2010a,
title = {Numerical investigations of a Helmholtz equation with unique solution for all wavenumber applied to acoustic radiation},
author = {Antoine Lavie and Alexandre Leblanc},
year = {2010},
date = {2010-01-01},
booktitle = {EAA EUROREGIO Congress on Sound and Vibration, CD-ROM, Ljubljana, Slovénie},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2010Conférence ER5 Auteurs : Lavie, Antoine; Leblanc, Alexandre Treatment of irregular frequencies in boundary element method: numerical investigations of an average process Colloque Interactions Fluide-Structure, Université de Technologie de Compiègne, 2010, (ICTS). @conference{Lavie2010bb,
title = {Treatment of irregular frequencies in boundary element method: numerical investigations of an average process},
author = {Antoine Lavie and Alexandre Leblanc},
year = {2010},
date = {2010-01-01},
booktitle = {Colloque Interactions Fluide-Structure, Université de Technologie de Compiègne},
note = {ICTS},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2010Article de journal ER5 Auteurs : Mezrhab, Ahmed; Moussaoui, Mohammed Amine; Jami, Mohammed; Naji, Hassane; Bouzidi, M'hamed Double MRT thermal lattice Boltzmann method for simulating convective flows Dans: Physics Letters A, vol. 374, no. 34, p. 3499 - 3507, 2010, ISSN: 0375-9601, (ACL). Liens @article{Mezrhab20103499,
title = {Double MRT thermal lattice Boltzmann method for simulating convective flows},
author = {Ahmed Mezrhab and Mohammed Amine Moussaoui and Mohammed Jami and Hassane Naji and M'hamed Bouzidi},
url = {http://www.sciencedirect.com/science/article/pii/S0375960110007735},
doi = {https://doi.org/10.1016/j.physleta.2010.06.059},
issn = {0375-9601},
year = {2010},
date = {2010-01-01},
journal = {Physics Letters A},
volume = {374},
number = {34},
pages = {3499 - 3507},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Mezrhab, Ahmed; Elfarh, Larbi; Naji, Hassane; Lemonnier, Denis Computation of surface radiation and natural convection in a heated horticultural greenhouse Dans: Applied Energy, vol. 87, no. 3, p. 894 - 900, 2010, ISSN: 0306-2619, (ACL). Liens @article{Mezrhab2010894,
title = {Computation of surface radiation and natural convection in a heated horticultural greenhouse},
author = {Ahmed Mezrhab and Larbi Elfarh and Hassane Naji and Denis Lemonnier},
url = {http://www.sciencedirect.com/science/article/pii/S0306261909002141},
doi = {https://doi.org/10.1016/j.apenergy.2009.05.017},
issn = {0306-2619},
year = {2010},
date = {2010-01-01},
journal = {Applied Energy},
volume = {87},
number = {3},
pages = {894 - 900},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Moussaoui, Mohammed Amine; Jami, Mohammed; Mezrhab, Ahmed; Naji, Hassane MRT-Lattice Boltzmann simulation of forced convection in a plane channel with an inclined square cylinder Dans: International Journal of Thermal Sciences, vol. 49, no. 1, p. 131 - 142, 2010, ISSN: 1290-0729, (ACL). Liens @article{Moussaoui2010b,
title = {MRT-Lattice Boltzmann simulation of forced convection in a plane channel with an inclined square cylinder},
author = {Mohammed Amine Moussaoui and Mohammed Jami and Ahmed Mezrhab and Hassane Naji},
url = {http://www.sciencedirect.com/science/article/pii/S1290072909001501},
doi = {https://doi.org/10.1016/j.ijthermalsci.2009.06.009},
issn = {1290-0729},
year = {2010},
date = {2010-01-01},
journal = {International Journal of Thermal Sciences},
volume = {49},
number = {1},
pages = {131 - 142},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Moussaoui, Mohamed Amine; Jami, Mohamed; Mezrhab, Ahmed; Naji, Hassane Computation of heat transfer and fluid flow in an obstructed channel using lattice Boltzmann method Dans: Engineering Computations, vol. 27, no. 1, p. 106-116, 2010, (ACL). Liens @article{Moussaoui2010bb,
title = {Computation of heat transfer and fluid flow in an obstructed channel using lattice Boltzmann method},
author = {Mohamed Amine Moussaoui and Mohamed Jami and Ahmed Mezrhab and Hassane Naji},
doi = {https://doi.org/10.1108/02644401011008540},
year = {2010},
date = {2010-01-01},
journal = {Engineering Computations},
volume = {27},
number = {1},
pages = {106-116},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Naji, Hassane; Mompean, Gilmar Computation of the Turbulent Flow in a Square Duct Using a Cubic Low-Reynolds Stress Model Dans: Computer Modeling in Engineering & Sciences, vol. 53, no. 2, p. 181/-206, 2010, (ACL). Résumé | Liens @article{Naji2010,
title = {Computation of the Turbulent Flow in a Square Duct Using a Cubic Low-Reynolds Stress Model},
author = {Hassane Naji and Gilmar Mompean},
doi = {https://doi.org/10.3970/cmes.2009.053.181},
year = {2010},
date = {2010-01-01},
journal = {Computer Modeling in Engineering & Sciences},
volume = {53},
number = {2},
pages = {181/-206},
abstract = {The aim of this work is to predict numerically the turbulent flow through a straight square duct using a nonlinear stress-strain model. The paper considers the application of the Craft et al.'s model [Craft, Launder, and Suga (1996)] to the case of turbulent incompressible flow in a straight square duct. In order to handle wall proximity effects, damping functions are introduced. Using a priori and a posteriori investigations, we show the performance of this model to predict such flows. The analysis of the flow anisotropy is made using the anisotropy-invariant map proposed by Lumley and Newman [Lumley and Newman (1977)]. This map shows the various possible states of the turbulence. The mean flow field and the turbulent statistics are compared with existing numerical and experimental data for square and rectangular duct flows. Overall, the model performance is shown to be satisfactory. In particular, the mean secondary velocity field and the streamwise vorticity are well predicted.},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
The aim of this work is to predict numerically the turbulent flow through a straight square duct using a nonlinear stress-strain model. The paper considers the application of the Craft et al.'s model [Craft, Launder, and Suga (1996)] to the case of turbulent incompressible flow in a straight square duct. In order to handle wall proximity effects, damping functions are introduced. Using a priori and a posteriori investigations, we show the performance of this model to predict such flows. The analysis of the flow anisotropy is made using the anisotropy-invariant map proposed by Lumley and Newman [Lumley and Newman (1977)]. This map shows the various possible states of the turbulence. The mean flow field and the turbulent statistics are compared with existing numerical and experimental data for square and rectangular duct flows. Overall, the model performance is shown to be satisfactory. In particular, the mean secondary velocity field and the streamwise vorticity are well predicted. |
2010Article de journal ER5 Auteurs : Jafar, R; Shahrour, Isam; Juran, Ilan Application of Artificial Neural Networks (ANN) to model the failureof urban water mains MATHEMATICAL AND COMPUTER MODELLING Volume:51 Issue: 9-10 Pages: 1170-1180 DOI: 10.1016/j.mcm.2009.12.033 Dans: 2010, (ACL). @article{Jafar2010a,
title = {Application of Artificial Neural Networks (ANN) to model the failureof urban water mains MATHEMATICAL AND COMPUTER MODELLING Volume:51 Issue: 9-10 Pages: 1170-1180 DOI: 10.1016/j.mcm.2009.12.033},
author = {R Jafar and Isam Shahrour and Ilan Juran},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER5 Auteurs : Sadek, Marwan; Mroueh, Hussein; Shahrour, Isam Influence of Nonlinearity on the Stress Distribution in the Soil-Application to Road Engineering Problems Dans: Journal of Transportation Engineering, vol. 136, no. 1, p. 77-83, 2010, (ACL). Liens @article{sadek:hal-03930829,
title = {Influence of Nonlinearity on the Stress Distribution in the Soil-Application to Road Engineering Problems},
author = {Marwan Sadek and Hussein Mroueh and Isam Shahrour},
url = {https://hal.archives-ouvertes.fr/hal-03930829},
doi = {10.1061/(ASCE)TE.1943-5436.0000084},
year = {2010},
date = {2010-01-01},
urldate = {2010-01-01},
journal = {Journal of Transportation Engineering},
volume = {136},
number = {1},
pages = {77-83},
publisher = {American Society of Civil Engineers},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER5 Auteurs : Cherif, Yassine; Joulin, Annabelle; Zalewski, Laurent; Lassue, Stéphane Experimental and numerical simulation of forced convection and radiationheat fluxes in a horizontal channel , International Journal of ŦhermalSciences, 48, 9,1696-1706, 2009. Dans: 2009, (ACL). @article{Cherif2009,
title = {Experimental and numerical simulation of forced convection and radiationheat fluxes in a horizontal channel , International Journal of ŦhermalSciences, 48, 9,1696-1706, 2009.},
author = {Yassine Cherif and Annabelle Joulin and Laurent Zalewski and Stéphane Lassue},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER5 Auteurs : Joulin, Annabelle; Younsi, Zohir; Zalewski, Laurent; Rousse, D; Lassue, Stéphane A numerical study of the melting of phase change material heatedfrom a vertical wall of a rectangular enclosure, Int. Journal ofComputational Fluid Đynamics, Vol. 23, No. 7, pp553a“566, 200 Dans: 2009, (ACL). @article{joul2009a,
title = {A numerical study of the melting of phase change material heatedfrom a vertical wall of a rectangular enclosure, Int. Journal ofComputational Fluid Đynamics, Vol. 23, No. 7, pp553a“566, 200},
author = {Annabelle Joulin and Zohir Younsi and Laurent Zalewski and D Rousse and Stéphane Lassue},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER5 Auteurs : Mezrhab, A; Moussaoui, M A; Jami, M; Naji, Hassane Convective heat transfer over two blocks arbitrary located in a 2Đplane channel using a hybrid lattice Boltzmann-Finite differencemethod^a€?, Ħeat and Mass transfer, vol. 45, No 11, pp: 1373-1381,2009, doi: 10.1007/s00231-009-0514-9 Dans: 2009, (ACL). @article{Mezrhab2009a,
title = {Convective heat transfer over two blocks arbitrary located in a 2Đplane channel using a hybrid lattice Boltzmann-Finite differencemethod^a€?, Ħeat and Mass transfer, vol. 45, No 11, pp: 1373-1381,2009, doi: 10.1007/s00231-009-0514-9},
author = {A Mezrhab and M A Moussaoui and M Jami and Hassane Naji},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER5 Auteurs : Mezrhab, A; Naji, Hassane Coupling of lattice Boltzmann equation and finite volume method tosimulate heat transfer in a square cavity, Fluid Đynamics & MaterialsProcessing (FDMP), Vol. 5, N 3, pp: 283-295, 2009, doi: 10.3970/fdmp.2009.005.283. Dans: 2009, (ACL). @article{Mezrhab2009b,
title = {Coupling of lattice Boltzmann equation and finite volume method tosimulate heat transfer in a square cavity, Fluid Đynamics & MaterialsProcessing (FDMP), Vol. 5, N 3, pp: 283-295, 2009, doi: 10.3970/fdmp.2009.005.283.},
author = {A Mezrhab and Hassane Naji},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER5 Auteurs : Moussaoui, M A; Jami, M; Mezrhab, A; Naji, Hassane Lattice Boltzmann simulation of convective heat transfer from heatedblocks in horizontal channel, Numerical Ħeat Ŧransfer Part A: anInt. J. of Computation and Methodology, vol. 56, N° 5, pp: 422-443,2009, doi: 10.1080/10407780903244338 Dans: 2009, (ACL). @article{Moussaoui2009a,
title = {Lattice Boltzmann simulation of convective heat transfer from heatedblocks in horizontal channel, Numerical Ħeat Ŧransfer Part A: anInt. J. of Computation and Methodology, vol. 56, N° 5, pp: 422-443,2009, doi: 10.1080/10407780903244338},
author = {M A Moussaoui and M Jami and A Mezrhab and Hassane Naji},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER5},
pubstate = {published},
tppubtype = {article}
}
|