Publications

Nos publications sont également accessibles dans l’Archive Ouverte HAL LGCgE.

Tout voire

149 Entrées « 1 de 3 »

2023Article de journal ER3

Auteurs : Libessart, Laurent; Anceur, R.; Djelal-Dantec, Chafika; Aljawish, A.; Millares, M.

Synthesis and characterization of release agent from used cooking oil at the concrete/formwork interface

Dans: International Journal of Environmental Science and Technology, 2023, (ACL).

Liens

2023Article de journal ER3

Auteurs : Feys, Dimitri; Keller, Helena; Cheikh, Khadija El; Secrieru, Egor; Vanhove, Yannick

RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-a comprehensive flow curve analysis

Dans: Materials and structures, vol. 56, no. 5, p. 105, 2023, (ACL).

Liens

2023Article de journal ER3

Auteurs : Schlupp, Florian; Page, Jonathan; Djelal-Dantec, Chafika; Libessart, Laurent

Use of biomass bottom ash as granular substitute in mortar

Dans: Journal of Building Engineering, vol. 75, p. 106927, 2023, (ACL).

Liens

2023Article de journal ER3

Auteurs : Ajouguim, Soukaina; Page, Jonathan; Djelal-Dantec, Chafika; Saâdi, Latifa

Effect of treated Alfa fibers on hydration kinetics, mechanical, and adhesion properties of fiber cement composite

Dans: Journal of Building Engineering, vol. 71, p. 106558, 2023, (ACL).

Liens

2023Article de journal ER3

Auteurs : Libessart, Laurent; Anceur, R.; Djelal-Dantec, Chafika; Aljawish, A.; Millares, M.

Synthesis and characterization of release agent from used cooking oil at the concrete/formwork interface

Dans: International Journal of Environmental Science and Technology, 2023, (ACL).

Liens

2023Article de journal ER3

Auteurs : Feys, Dimitri; Sonebi, Mohammed; Amziane, Sofiane; Djelal-Dantec, Chafika; El-Cheikh, Khadija; Fataei, Shirin; Greim, Markus; Ivanova, Irina; Keller, Helena; Khayat, Kamal; Vanhove, Yannick; Libessart, Laurent; Mechtcherine, Viktor; Navarrete, Ivan; Perrot, Arnaud; Secrieru, Egor

RILEM TC 266-MRP: round-robin rheological tests on high performance mortar and concrete with adapted rheology-rheometers, mixtures and procedures

Dans: Materials and structures, vol. 56, no. 4, p. 90, 2023, (ACL).

Liens

2023Article de journal ER3

Auteurs : Bouziadi, Farid; Haddi, Abdelkader; Tahenni, Touhami; Boulekbache, Bensaid; Hamrat, Mostefa; Naser, Mz; Amziane, Sofiane

Development of a local bond shear stress-slip model of RC beams externally strengthened with FRP materials

Dans: Journal of Composite Materials, vol. 57, no. 14, p. 2261-2285, 2023, (ACL).

Liens

2023Article de journal ER3

Auteurs : Nadour, Younes; Bouziadi, Farid; Hamrat, Mostefa; Boulekbache, Bensaid; Amziane, Sofiane; Haddi, Abdelkader; Labed, Abderrahim

Short- and long-term properties of self-compacting concrete containing recycled coarse aggregate under different curing temperatures: experimental and numerical study

Dans: Materials and structures, vol. 56, no. 4, p. 83, 2023, (ACL).

Liens

2023Article de journal ER3

Auteurs : Chenaifi, Khalil; Benabid, Yacine; Messellek, Ali Cherif; Ouali, Mohand Ould; Amrouche, A.

Preventing the increase in the risk of bone failure in osteoporotic cervical spine vertebra with a novel computational approach

Dans: Journal of Mechanics in Medicine and Biology, vol. 23, no. 03, 2023, (ACL).

Liens

2023Article de journal ER3

Auteurs : Talibi, Soukayna; Page, Jonathan; Djelal-Dantec, Chafika; Waqif, Mohamed; Saâdi, Latifa

Study of earth-based materials for manufacturing compaction process

Dans: Journal of Building Engineering, vol. 64, no. 6, p. 105546, 2023, (ACL).

Liens

2022Article de journal ER3

Auteurs : Bouziadi, Farid; Boulekbache, Bensaid; Tahenni, Touhami; Haddi, Abdelkader; Hamrat, Mostefa; Amziane, Sofiane

Finite element analysis of steady-state uniaxial basic creep of high-performance concrete

Dans: Journal of Building Engineering, vol. 52, p. 104500, 2022, (ACL).

Liens

2022Conférence ER3

Auteurs : Bouziadi, Farid; Boulekbache, Bensaid; Haddi, Abdelkader

Total creep of RC beam subjected to sustained loads: Experiment and numerical medeling approach

2022, (COM).

Résumé | Liens

2022Article de journal ER3

Auteurs : Engone, Jean Gérard Ndong; Moumen, Ahmed El; Djelal-Dantec, Chafika; Imad, Abdellatif; Kanit, Toufik; Page, Jonathan

Evaluation of Effective Elastic Properties for Wood--Cement Composites: Experimental and Computational Investigations

Dans: Sustainability, vol. 14, no. 14, p. 8638, 2022, (ACL).

Liens

2022Article de journal ER3

Auteurs : Page, Jonathan; Khadraoui, Fouzia; Gomina, Moussa; Boutouil, Mohamed

Hydration of flax fibre-reinforced cementitious composites: influence of fibre surface treatments

Dans: European Journal of Environmental and Civil Engineering, vol. 26, no. 12, p. 5798-5820, 2022, (ACL).

Liens

2022Article de journal ER3

Auteurs : Abdallah, Amani-Adra; Kada, Hassina; Amrouche, Abdelwaheb

Mechanical and thermo-physical characterization of mortars made with uncontaminated marine sediments

Dans: Journal of Material Cycles and Waste Management, 2022, (ACL).

Liens

2022Inproceedings ER3

Auteurs : Schlupp, Florian; Page, Jonathan; Djelal, Chafika C. Djelal; Libessart, Laurent

Effet de la combustion sur les cendres sous foyer de biomasse - Valorisation en tant que sable dans un mortier

Dans: NOMAD 2022 - 4e conférence internationale francophone Nouveaux Matériaux et Durabilité, IMT Mines Al`es and LMGC and LIFAM Montpellier, France, 2022, (ACTI).

Liens

2022Article de journal ER3

Auteurs : Mazian, Brahim; Wirquin, Eric; Aguibi, Kawther; Martin, Patrick; Chaveriat, Ludovic; Dubois, Vincent

Effect of mixing conditions on the density, morphology, thermal and mechanical properties of mineral foam

Dans: Journal of Building Engineering, vol. 52, p. 104410, 2022, (ACL).

Liens

2022Article de journal ER3

Auteurs : Abdallah, Amani; Kada, Hassina; Amrouche, Abdelwaheb

Thermo-physical characterization of mortars made with uncontaminated marine sediments

Dans: Academic Journal of Civil Engineering, vol. 40, no. 1, p. 194-198, 2022, (ACL).

Liens

2022Article de journal ER3

Auteurs : Engone, Jean Gérard Ndong; Moumen, Ahmed El; Djelal-Dantec, Chafika; Imad, Abdellatif; Kanit, Toufik; Page, Jonathan

Evaluation of Effective Elastic Properties for Wood--Cement Composites: Experimental and Computational Investigations

Dans: Sustainability, vol. 14, no. 14, p. 8638, 2022, (ACL).

Liens

2022Article de journal ER3

Auteurs : Ajouguim, Soukaina; Page, Jonathan; Djelal-Dantec, Chafika; Waqif, Mohamed; Saadi, Latifa

Performance of Alfa fibres in cementitious materials exposed to diverse surface treatments

Dans: Construction Technologies and Architecture, vol. 1, p. 660-667, 2022, (ACL).

Liens

2022Article de journal ER3

Auteurs : Talouti, S.; Benzerga, D.; Haddi, Abdelkader

Numerical Investigations of Damage Behaviour at the Weld/Base Metal Interface

Dans: International Journal of Engineering, vol. 35, no. 12, p. 2337-2343, 2022, (ACL).

Liens

2022Article de journal ER3

Auteurs : Bouziadi, Farid; Boulekbache, Bensaid; Tahenni, Touhami; Haddi, Abdelkader; Hamrat, Mostefa; Amziane, Sofiane

Finite element analysis of steady-state uniaxial basic creep of high-performance concrete

Dans: Journal of Building Engineering, vol. 52, p. 104500, 2022, (ACL).

Liens

2021Article de journal ER3

Auteurs : Page, Jonathan; Amziane, Sofiane; Gomina, Moussa; Djelal-Dantec, Chafika; Audonnet, Fabrice

Using linseed oil as flax fibre coating for fibre-reinforced cementitious composite

Dans: Industrial Crops and Products, vol. 161, p. 113168, 2021.

Liens

2021Article de journal ER3

Auteurs : Ajouguim, Soukaina; Talibi, S; Djelal-Dantec, Chafika; Hajjou, H; Waqif, M; Stefanidou, M; Saadi, L

Effect of Alfa fibers on the mechanical and thermal properties of compacted earth bricks

Dans: Materials Today: Proceedings, vol. 37, p. 4049–4057, 2021.

Liens

2021Article de journal ER3

Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika

Influence of the formwork removal by polarization on the facing aesthetics in reinforced concrete

Dans: Construction and Building Materials, vol. 284, p. 122841, 2021.

Liens

2021Article de journal ER3

Auteurs : Spitz, Nicolas; Coniglio, Nicolas; Libessart, Laurent; Mansori, Mohamed El; Djelal-Dantec, Chafika

Characterizing tribological behavior of fresh concrete against formwork surfaces

Dans: Construction and Building Materials, vol. 303, p. 124233, 2021, ISSN: 0950-0618, (ACL).

Résumé | Liens

2021Article de journal ER3

Auteurs : Regad, Abdelmalek; Benzerga, Djebara; Berrekia, Habib; Haddi, Abdelkader; Chekhar, Nourredine

Repair and rehabilitation of corroded HDPE100 pipe using a new hybrid composite

Dans: Frattura ed Integrit`a Strutturale / Fracture and Structural Integrity, vol. 15, no. 56, p. 115-122, 2021, (ACL).

Liens

2021Article de journal ER3

Auteurs : Page, Jonathan; Khadraoui, Fouzia; Gomina, Moussa; Boutouil, Mohamed

Enhancement of the long-term mechanical performance of flax fiber-reinforced cementitious composites by using alternative binders

Dans: Journal of Building Engineering, vol. 40, p. 102323, 2021, (ACL).

Liens

2021Article de journal ER3

Auteurs : Zein, Abdul Rahman El; Vanhove, Yannick; Djelal, Chafika C. Djelal; Madec, Olivier; Gotteland, Philippe

Evaluation of internal bleeding in concrete foundation from the Terzaghi's effective stress postulate

Dans: Materials and structures, vol. 54, no. 6, p. 231, 2021, (ACL).

Liens

2021Article de journal ER3

Auteurs : Ajouguim, Soukaina; Page, Jonathan; Djelal, Chafika; Waqif, Mohamed; Saadi, Latifa

Impact of Alfa fibers morphology on hydration kinetics and mechanical properties of cement mortars

Dans: Construction and Building Materials, vol. 293, p. 123514, 2021, (ACL).

Liens

2021Conférence ER3

Auteurs : Abdallah, Amani-Adra; Kada, Hassina; Kanit, Toufik; Amrouche, Abdelwaheb

Determination of the mechanicals properties of cementitious mixtures with sediments : experimental and numerical approaches

7th international symposium on sediment management, Llille, France, 2021.

Liens

2020Article de journal ER3

Auteurs : Bouziadi, Farid; Boulekbache, Bensaid; Haddi, Abdelkader; Hamrat, Mostefa; Djelal-Dantec, Chafika

Finite element modeling of creep behavior of FRP-externally strengthened reinforced concrete beams

Dans: Engineering Structures, vol. 204, p. 109908, 2020, ISSN: 0141-0296, (ACL).

Résumé | Liens

2020Article de journal ER3

Auteurs : Libessart, Laurent; Djelal-Dantec, Chafika; de Caro, Pascale; Laiymani, Issam

Comparative study of the tribological behaviour of emulsions and demoulding oils at the concrete/formwork interface

Dans: Construction and Building Materials, vol. 239, p. 117826, 2020, ISSN: 0950-0618, (ACL).

Résumé | Liens

2020Article de journal ER3

Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick; Azzi, Amin; Madec, Olivier

Recommendation for concrete mix design to prevent bleed channels on diaphragm walls

Dans: European Journal of Environmental and Civil Engineering, vol. 0, no. 0, p. 1-13, 2020, (ACL).

Liens

2020Article de journal ER3

Auteurs : Djelal-Dantec, Chafika; Page, Jonathan; Kada, Hassina; Vanhove, Yannick

Feasibility study of using poplar wastes as sand in cement mortars

Dans: Journal of Material Cycles and Waste Management, vol. 22, no. 2, p. 488–500, 2020, ISBN: 1611-8227, (ACL).

Résumé | Liens

2020Conférence ER3

Auteurs : Page, Jonathan; Libessart, Laurent; Djelal-Dantec, Chafika

Use of biomasse fly ash in cementitious materials

Advanced Materials for Sustainable Infrastructure Development, Ventura, USA, 2020, (ACTI).

2020Article de journal ER3

Auteurs : Djelal-Dantec, Chafika; Page, Jonathan; Vanhove, Yannick; Kada, Hassina

Experimental study on the valorization of poplar by-products in cement-based materials

Dans: Lecture Notes in Civil Engineering, vol. 54, p. 603-608, 2020, (cited By 0).

Liens

2020Article de journal ER3

Auteurs : Lahmar, Nassira; Bouziadi, Farid; Boulekbache, Bensaid; Meziane, El-Hadj; Hamrat, Mostefa; Haddi, Abdelkader; Djelal-Dantec, Chafika

Experimental and finite element analysis of shrinkage of concrete made with recycled coarse aggregates subjected to thermal loading

Dans: Construction and Building Materials, vol. 247, p. 118564, 2020.

Liens

2020Article de journal ER3

Auteurs : Leussa, Claudia Charlotte Tchamo; Libessart, Laurent; Djelal-Dantec, Chafika; Djangang, Chantale Njiomou; Elimbi, Antoine

Pozzolanic activity of kaolins containing aluminum hydroxide

Dans: Scientific Reports, vol. 10, no. 1, 2020.

Liens

2020Article de journal ER3

Auteurs : Page, Jonathan; Djelal-Dantec, Chafika; Vanhove, Yannick

Optimisation of vibrocompaction process for wood-based concrete blocks

Dans: The International Journal of Advanced Manufacturing Technology, vol. 109, no. 3-4, p. 1189–1204, 2020.

Liens

2020Article de journal ER3

Auteurs : Djelal-Dantec, Chafika; Long, Mardy; Haddi, Abdelkader; Szulc, Julien

Effect of marine environment on the behaviour of concrete structures reinforced by composite materials

Dans: Mechanics & Industry, vol. 21, no. 4, p. 407, 2020.

Liens

2020Article de journal ER3

Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika

Influence of rheological properties of concrete foundation on the implementation of continuous flight auger (CFA) piles

Dans: Materials and Structures, vol. 53, no. 5, 2020.

Liens

2020Article de journal ER3

Auteurs : Ajouguim, Soukaina; Page, Jonathan; Djelal-Dantec, Chafika; Waqif, Mohamed; â, Latifa Sa

Investigation on the use of ground alfa fibres as reinforcement of cement mortars

Dans: Proceedings of the Institution of Civil Engineers - Construction Materials, p. 1–11, 2020.

Liens

2020Article de journal ER3

Auteurs : Nouri, Assia; Hamrat, Mostefa; Boulekbache, Bensaid; Nouri, Said; Bouziadi, Farid; Labed, Abderrahim; Haddi, Abdelkader; Djelal-Dantec, Chafika

Quantification of shear strength in reinforced concrete beams using digital image correlation: Experimental and analytical study

Dans: Advances in Structural Engineering, vol. 24, no. 1, p. 147–164, 2020.

Liens

2020Conférence ER3

Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika

Effect of rheological properties of concrete foundation on the implementation of CFA-Piles

29th Conference on Rheology of Building Materials, OTH- Regensburg, Germany, 2020, (COM).

2020Article de journal ER3

Auteurs : Bouchedjra, Moussa; Amrouche, Abdelwaheb; Kanit, Toufik; Belouchrani, Mohamed El Amine

Microstructural features effect on the evolution of cyclic damage for polycrystalline metals using a multiscale approach

Dans: International Journal of Damage Mechanics, vol. 30, no. 1, p. 77–102, 2020.

Liens

2020Article de journal ER3

Auteurs : Messellek, Ali Cherif; Ouali, Mohand Ould; Amrouche, Abdelwaheb

Adaptive finite element simulation of fretting wear and fatigue in a taper junction of modular hip prosthesis

Dans: Journal of the Mechanical Behavior of Biomedical Materials, vol. 111, p. 103993, 2020.

Liens

2019Article de journal ER3

Auteurs : Habib, Berrekia; Djebbara, Benzerga; Haddi, Abdelkader

Behavior and damage of a pipe in the presence of a corrosion defect depth of 10 % of its thickness and highlighting the weaknesses of the ASME / B31G method

Dans: Frattura ed Integrita Strutturale, vol. 13, no. 49, p. 643-654, 2019, (ACL).

Liens

2019Article de journal ER3

Auteurs : Adel, Chouiter; Djebbara, Benzerga; Haddi, Abdelkader; T., Tamine

Prediction of cycle life of expansion bellows for fixed tube sheet heat exchanger

Dans: Frattura ed Integrita Strutturale, vol. 13, no. 14, p. 30-38, 2019, (ACL).

Liens

2019Conférence ER3

Auteurs : Amziane, S; Djelal-Dantec, Chafika; El-Cheikh, K; Fabbris, F; Fataei, S; Feys, D; Greim, M; Ivanova, I; Keller, H; Khayat, K; Libessart, Laurent; Mechcherine, V; Navarette, I; Perrot, A; Secrieru, E; Sonebi, M; Vanhove, Yannick

An overview of RILEM TC MRP round-robin testing of concrete and mortar rheology in Bethune France, May 2018

2nd International RILEM Conference Rheology and Processing of Contruction Materials (RheoCon2), 9th International RILEM Symposium Self-Compacting Concerte (SCC9), Dresden, Germany, 2019, (ACTI).

149 Entrées « 1 de 3 »