2020Conférence ER5 Auteurs : Abdellatif, Makram; Chamoin, Julien; Defer, Didier; NIANGA, Jean Marie Prédiction par régression linéaire multiple : application au comportement thermique d'un bâtiment Rencontre Universitaire de Genie Civil, Marrakech, Morocco, 2020. Liens @conference{Abdellatif2020b,
title = {Prédiction par régression linéaire multiple : application au comportement thermique d'un bâtiment},
author = {Makram Abdellatif and Julien Chamoin and Didier Defer and Jean Marie NIANGA},
url = {https://hal.archives-ouvertes.fr/hal-03211526},
year = {2020},
date = {2020-01-01},
urldate = {2020-01-01},
booktitle = {Rencontre Universitaire de Genie Civil},
address = {Marrakech, Morocco},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2020Conférence ER5 Auteurs : Carbone, Giovanni; Martinat, Guillaume; Farcy, Dominique; Harion, Jean-Luc Aerodynamic investigation of a 3.5:1 prolate spheroid AIAA AVIATION 2020 FORUM, VIRTUAL EVENT (Reno), United States, 2020, (ACTI). Résumé | Liens @conference{doi:10.2514/6.2020-3053,
title = {Aerodynamic investigation of a 3.5:1 prolate spheroid},
author = {Giovanni Carbone and Guillaume Martinat and Dominique Farcy and Jean-Luc Harion},
url = {https://arc.aiaa.org/doi/abs/10.2514/6.2020-3053},
doi = {10.2514/6.2020-3053},
year = {2020},
date = {2020-06-08},
urldate = {2020-06-08},
booktitle = {AIAA AVIATION 2020 FORUM},
address = {VIRTUAL EVENT (Reno), United States},
abstract = {Experimental measurements, steady (RANS) and unsteady (URANS) numerical simulations are performed on a 3.5:1 prolate spheroid at angles of attack from 0° to 90°. The Reynolds number considered is Re_L=2.57*10^6, corresponding to the wind tunnel conditions. CFD simulations are performed with OpenFOAM, using the k-omega SST and the Spalart-Allmaras turbulence models. Analyses of aerodynamic coefficients and surface pressure show a good agreement between CFD simulations and experimental results. The turbulent structures in the wake of the spheroid have a complex topology, strongly dependent on the angle of attack considered. Results of URANS simulations allow to identify turbulent structures that are steady and asymmetric at low angles of attack, symmetric and unsteady at higher values. The configuration at AoA=90° is the most complex with the presence of disorganized and unstable structures.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
Experimental measurements, steady (RANS) and unsteady (URANS) numerical simulations are performed on a 3.5:1 prolate spheroid at angles of attack from 0° to 90°. The Reynolds number considered is Re_L=2.57*10^6, corresponding to the wind tunnel conditions. CFD simulations are performed with OpenFOAM, using the k-omega SST and the Spalart-Allmaras turbulence models. Analyses of aerodynamic coefficients and surface pressure show a good agreement between CFD simulations and experimental results. The turbulent structures in the wake of the spheroid have a complex topology, strongly dependent on the angle of attack considered. Results of URANS simulations allow to identify turbulent structures that are steady and asymmetric at low angles of attack, symmetric and unsteady at higher values. The configuration at AoA=90° is the most complex with the presence of disorganized and unstable structures. |
2019Conférence ER5 Auteurs : Harion, Jean-Luc; Donze, S Modélisation de trempe thermique du verre dans l'industrie verrière des arts de la table Congrès Français de Mécanique, 2019, (ACTN). Résumé | Liens @conference{Harion.Donze2019a,
title = {Modélisation de trempe thermique du verre dans l'industrie verrière des arts de la table},
author = {Jean-Luc Harion and S Donze},
doi = {https://cfm2019.sciencesconf.org/270918},
year = {2019},
date = {2019-01-01},
booktitle = {Congrès Français de Mécanique},
abstract = {Dans les marchés liés aux arts de la table, pour lesquels ARC est un des leaders mondiaux, les articles en verre trempés représentent une part très significative des volumes de production et des ventes. Une attention particulière et une constante innovation sont donc dédiées à cette phase particulière du process verrier. En termes de production, l'exigence accrue des cahiers des charges clients, de qualité de production, mais aussi de limitation de l'impact environnemental, nécessitent une maîtrise accrue et des connaissances plus fines et précises du process. En parallèle d'études et de recherches menées sur bancs expérimentaux spécifiques et de tests sur chaînes de production, la modélisation numérique représente un outil central d'investigation et de recherche. La trempe du verre est un process largement utilisé et déployé depuis de nombreuses années dans l'industrie verrière. Elle fait intervenir un nombre significatif de paramètres physiques et physico-chimiques tels que notamment les configurations géométriques, la thermique de refroidissement et de chauffage, ou encore la composition du verre. L'analyse bibliographique sur la modélisation de la trempe du verre fait apparaître plusieurs points clés de développement pour une utilisation dimensionnante et prédictive dans l'industrie verrière des arts de la table. La bibliographie est quasi-exclusivement dédié au verre plat et le refroidissement est quasi-exclusivement simulé par des coefficients de transfert imposés uniformément en surfaces. Les productions dans l'industrie des arts de la table sont très fortement tridimensionnelles, tant en géométries qu'en répartitions d'épaisseurs et les systèmes de refroidissement sont loin de produire des transferts pouvant raisonnablement être modélisés par des coefficients de transfert constants et uniformément répartis. Ainsi des modélisations intégrant des géométries réalistes et un couplage conducto-convectif représentant les systèmes de refroidissement ont été mises en œuvre. Cette communication illustre la nécessité de cette démarche pour développer des modèles prédictifs.},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
Dans les marchés liés aux arts de la table, pour lesquels ARC est un des leaders mondiaux, les articles en verre trempés représentent une part très significative des volumes de production et des ventes. Une attention particulière et une constante innovation sont donc dédiées à cette phase particulière du process verrier. En termes de production, l'exigence accrue des cahiers des charges clients, de qualité de production, mais aussi de limitation de l'impact environnemental, nécessitent une maîtrise accrue et des connaissances plus fines et précises du process. En parallèle d'études et de recherches menées sur bancs expérimentaux spécifiques et de tests sur chaînes de production, la modélisation numérique représente un outil central d'investigation et de recherche. La trempe du verre est un process largement utilisé et déployé depuis de nombreuses années dans l'industrie verrière. Elle fait intervenir un nombre significatif de paramètres physiques et physico-chimiques tels que notamment les configurations géométriques, la thermique de refroidissement et de chauffage, ou encore la composition du verre. L'analyse bibliographique sur la modélisation de la trempe du verre fait apparaître plusieurs points clés de développement pour une utilisation dimensionnante et prédictive dans l'industrie verrière des arts de la table. La bibliographie est quasi-exclusivement dédié au verre plat et le refroidissement est quasi-exclusivement simulé par des coefficients de transfert imposés uniformément en surfaces. Les productions dans l'industrie des arts de la table sont très fortement tridimensionnelles, tant en géométries qu'en répartitions d'épaisseurs et les systèmes de refroidissement sont loin de produire des transferts pouvant raisonnablement être modélisés par des coefficients de transfert constants et uniformément répartis. Ainsi des modélisations intégrant des géométries réalistes et un couplage conducto-convectif représentant les systèmes de refroidissement ont été mises en œuvre. Cette communication illustre la nécessité de cette démarche pour développer des modèles prédictifs. |
2019Conférence ER5 Auteurs : Harion, Jean-Luc; Donze, S Modélisations multi-physiques dans l’industrie verrière des arts de la table, illustrations de quelques points clés Journée CARNOT, Les défis du verre vert, Paris, 2019, (COM). Liens @conference{Harion.Donze2019b,
title = {Modélisations multi-physiques dans l’industrie verrière des arts de la table, illustrations de quelques points clés},
author = {Jean-Luc Harion and S Donze},
doi = {https://cfm2019.sciencesconf.org/270918},
year = {2019},
date = {2019-01-01},
booktitle = {Journée CARNOT, Les défis du verre vert, Paris},
note = {COM},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conférence ER5 Auteurs : Donze, S; Harion, Jean-Luc Modélisation de la génération de contraintes lors de la trempe du verre Les Journées Révelor, Vers la Transition Vitreuse et au-delà, 2019, (COM). Résumé | Liens @conference{Donze.Harion2019,
title = {Modélisation de la génération de contraintes lors de la trempe du verre},
author = {S Donze and Jean-Luc Harion},
doi = {https://cfm2019.sciencesconf.org/270918},
year = {2019},
date = {2019-01-01},
booktitle = {Les Journées Révelor, Vers la Transition Vitreuse et au-delà},
abstract = {Les articles en verre trempés représentent une part très significative en volumes de production et de vente sur les marchés liés aux arts de la table, pour lesquels ARC est un des leaders mondiaux. En termes de production, l’exigence accrue des cahiers des charges clients, de qualité de production, mais aussi de limitation de l’impact environnemental, nécessite une maîtrise accrue et des connaissances plus fines et précises du process. Ainsi, une attention très particulière est portée par ARC à cette phase particulière du procédé verrier et une constante innovation est apportée pour améliorer ses performances.
En parallèle d’études et de recherches menées sur bancs expérimentaux spécifiques et de tests sur chaînes de production, la modélisation numérique représente un outil central d’investigation et de recherche.
La trempe du verre fait intervenir un nombre significatif de paramètres physiques et physico-chimiques tels que notamment les configurations géométriques, la thermique de refroidissement et de chauffage, ou encore la composition du verre.
L’analyse bibliographique sur la modélisation de la trempe du verre fait apparaître plusieurs points clés de développement pour une utilisation dimensionnante et prédictive dans l’industrie verrière des arts de la table :
- Prise en compte et analyse détaillée des effets tridimensionnels. Les productions dans l’industrie des arts de la table sont très fortement tridimensionnelles, tant en géométries qu’en répartitions d’épaisseurs. L’évolution des designs va dans le sens d’une accentuation de ce point.
- Couplage conducto-convectif. Les conditions limites prises en compte dans la bibliographie portent quasi-exclusivement sur des coefficients de transfert imposés uniformément en surface. Les systèmes de refroidissement sont loin de produire réellement ce type de condition limite thermique.
- Optimisation. Au-delà du dimensionnement et des enjeux de production rappelés précédemment, la modélisation permet de mettre en place des boucles de calculs afin d’optimiser une fonction objectif donnée.
- Validations et vérifications expérimentales des contraintes produites. Les mesures de contraintes dans les verres trempés, notamment en configurations fortement tridimensionnelles représentent également un enjeu important notamment pour disposer d’outil de vérification et validation des modèles.},
note = {COM},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
Les articles en verre trempés représentent une part très significative en volumes de production et de vente sur les marchés liés aux arts de la table, pour lesquels ARC est un des leaders mondiaux. En termes de production, l’exigence accrue des cahiers des charges clients, de qualité de production, mais aussi de limitation de l’impact environnemental, nécessite une maîtrise accrue et des connaissances plus fines et précises du process. Ainsi, une attention très particulière est portée par ARC à cette phase particulière du procédé verrier et une constante innovation est apportée pour améliorer ses performances.
En parallèle d’études et de recherches menées sur bancs expérimentaux spécifiques et de tests sur chaînes de production, la modélisation numérique représente un outil central d’investigation et de recherche.
La trempe du verre fait intervenir un nombre significatif de paramètres physiques et physico-chimiques tels que notamment les configurations géométriques, la thermique de refroidissement et de chauffage, ou encore la composition du verre.
L’analyse bibliographique sur la modélisation de la trempe du verre fait apparaître plusieurs points clés de développement pour une utilisation dimensionnante et prédictive dans l’industrie verrière des arts de la table :
- Prise en compte et analyse détaillée des effets tridimensionnels. Les productions dans l’industrie des arts de la table sont très fortement tridimensionnelles, tant en géométries qu’en répartitions d’épaisseurs. L’évolution des designs va dans le sens d’une accentuation de ce point.
- Couplage conducto-convectif. Les conditions limites prises en compte dans la bibliographie portent quasi-exclusivement sur des coefficients de transfert imposés uniformément en surface. Les systèmes de refroidissement sont loin de produire réellement ce type de condition limite thermique.
- Optimisation. Au-delà du dimensionnement et des enjeux de production rappelés précédemment, la modélisation permet de mettre en place des boucles de calculs afin d’optimiser une fonction objectif donnée.
- Validations et vérifications expérimentales des contraintes produites. Les mesures de contraintes dans les verres trempés, notamment en configurations fortement tridimensionnelles représentent également un enjeu important notamment pour disposer d’outil de vérification et validation des modèles. |
2019Conférence ER5 Auteurs : Colli, Carolina; Bataille, Alain; Antczak, Emmanuel Rebond effects on life cycle assessment of a house refurbishment Lille, France, Lille, 2019. @conference{Collib,
title = {Rebond effects on life cycle assessment of a house refurbishment},
author = {Carolina Colli and Alain Bataille and Emmanuel Antczak},
year = {2019},
date = {2019-01-01},
booktitle = {Lille, France},
address = {Lille},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conférence ER5 Auteurs : Colli, Carolina; Bataille, Alain; Antczak, Emmanuel Whole-Life Costing of a French Single-Family House Refurbishment: the “Bat-Eco2” case study Sustainable Building Environment, Graz, Austria, 2019, ISSN: 17551307. Liens @conference{Collia,
title = {Whole-Life Costing of a French Single-Family House Refurbishment: the “Bat-Eco2” case study},
author = {Carolina Colli and Alain Bataille and Emmanuel Antczak},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85073036407&doi=10.1088%2f1755-1315%2f323%2f1%2f012164&partnerID=40&md5=bc475e95c444dec1f6711b0321b178f2},
doi = {10.1088/1755-1315/323/1/012164},
issn = {17551307},
year = {2019},
date = {2019-01-11},
urldate = {2019-01-01},
booktitle = {Sustainable Building Environment, Graz, Austria},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conférence ER5 Auteurs : Sassine, Emilio; Cherif, Yassine; Antczak, Emmanuel Identification paramétrique des propriétés thermophysiques d’un mur en brique ancienne : Approches expérimentale et numérique 2019. @conference{Sassine2019b,
title = {Identification paramétrique des propriétés thermophysiques d’un mur en brique ancienne : Approches expérimentale et numérique},
author = {Emilio Sassine and Yassine Cherif and Emmanuel Antczak},
year = {2019},
date = {2019-01-01},
journal = {XIVème Colloque International Franco-Québécois en énergie16-20 juin 2019, École de technologie supérieure, Université du QuébecBaie St-Paul, Québec, Canada},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2019Conférence ER5 Auteurs : Cherif, Yassine; Tittelein, Pierre; Lassue, Stéphane Etude numérique des échanges convectifs au sein d’une fenêtre pariétodynamique de type Paziaud® contenant un film chauffant XIVème Colloque International Franco-Québécois en énergie, 2019, (ACTI). @conference{cherif2019a,
title = {Etude numérique des échanges convectifs au sein d’une fenêtre pariétodynamique de type Paziaud® contenant un film chauffant},
author = {Yassine Cherif and Pierre Tittelein and Stéphane Lassue},
year = {2019},
date = {2019-06-16},
urldate = {2019-06-16},
booktitle = {XIVème Colloque International Franco-Québécois en énergie},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER5 Auteurs : Qabbal, Loubna; Younsi, Zohir; Naji, Hassane Indoor air quality investigation in a ventilated demonstrator building via a smart sensor 39th AIVC conference - Smart ventilation for Buildings, AIVC AIVC, Antibes Juan - les-Pins, France, 2018, (ACTI). @conference{Qabba2018a,
title = {Indoor air quality investigation in a ventilated demonstrator building via a smart sensor},
author = {Loubna Qabbal and Zohir Younsi and Hassane Naji},
year = {2018},
date = {2018-09-01},
booktitle = {39th AIVC conference - Smart ventilation for Buildings},
publisher = {AIVC},
address = {Antibes Juan - les-Pins, France},
organization = {AIVC},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER5 Auteurs : Qabbal, Loubna; Labat, Lucille; Naji, Hassane; Younsi, Zohir; Talon, Sabrina Numerical and experimental identfcaton of factors influencing the pressure homogeneity during an airtghtness test in a large building 39th AIVC conference - Smart ventilation for Buildings, AIVC AIVC, Antibes Juan - les-Pins, France, 2018, (ACTI). @conference{Qabba2018b,
title = {Numerical and experimental identfcaton of factors influencing the pressure homogeneity during an airtghtness test in a large building},
author = {Loubna Qabbal and Lucille Labat and Hassane Naji and Zohir Younsi and Sabrina Talon},
year = {2018},
date = {2018-09-01},
booktitle = {39th AIVC conference - Smart ventilation for Buildings},
publisher = {AIVC},
address = {Antibes Juan - les-Pins, France},
organization = {AIVC},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER5 Auteurs : Qabbal, Loubna; Younsi, Zohir; Naji, Hassane Indoor Air Quality measurements in a tertially building vai a smart sensor connected toa Raspberry card: Apllication to a demonstrator building Int. Conference on Sustainability in Energy and Buildings (SEB-18), http://seb-18.kesinternational.org/ KES International, 2018, (ACTI). @conference{Qabba2018c,
title = {Indoor Air Quality measurements in a tertially building vai a smart sensor connected toa Raspberry card: Apllication to a demonstrator building},
author = {Loubna Qabbal and Zohir Younsi and Hassane Naji},
year = {2018},
date = {2018-06-01},
booktitle = {Int. Conference on Sustainability in Energy and Buildings (SEB-18)},
publisher = {KES International},
organization = {http://seb-18.kesinternational.org/},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER5 Auteurs : Qabbal, Loubna; Younsi, Zohir; Naji, Hassane Towards measuring indoor air quality and hygrothermal comfort with a smart sensor”, “Measurements of indoor air quality (IAQ) and hygrothermal comfort by a smart sensor Int. Symposium, Individual Air Sensors: Innovation or revolution?, Appa & PC2A Univ. Lille http://lille2018.appa.asso.fr/, Lille, France., 2018, (ACTI). @conference{Qabba2018d,
title = {Towards measuring indoor air quality and hygrothermal comfort with a smart sensor”, “Measurements of indoor air quality (IAQ) and hygrothermal comfort by a smart sensor},
author = {Loubna Qabbal and Zohir Younsi and Hassane Naji},
year = {2018},
date = {2018-11-01},
booktitle = {Int. Symposium, Individual Air Sensors: Innovation or revolution?},
publisher = {http://lille2018.appa.asso.fr/},
address = {Lille, France.},
organization = {Appa & PC2A Univ. Lille},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER5 Auteurs : Colli, Carolina; Bataille, Alain; Buyle-Bodin, François Aiming at a practical tool assessing residential building refurbishment project using LCA and LCC: the Bat-Eco2 Project Actions for a sustainable world from theory to practice, vol. ISBN 978-88-943228-1-1, 2018, (ACTI). @conference{,
title = {Aiming at a practical tool assessing residential building refurbishment project using LCA and LCC: the Bat-Eco2 Project},
author = {Carolina Colli and Alain Bataille and François Buyle-Bodin},
editor = {ISDRS 2018 Conference},
year = {2018},
date = {2018-01-01},
booktitle = {Actions for a sustainable world from theory to practice},
volume = {ISBN 978-88-943228-1-1},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER5 Auteurs : Antczak, Emmanuel; Asli, Mounir; Brachelet, Franck; Brue, Flore; Defer, Didier Etude du comportement hygrothermique d’anas de lin utilisés comme isolant en vrac de combles perdus Conférence IBPSA France 2018, Bordeaux 2018, (ACTN). @conference{,
title = {Etude du comportement hygrothermique d’anas de lin utilisés comme isolant en vrac de combles perdus},
author = {Emmanuel Antczak and Mounir Asli and Franck Brachelet and Flore Brue and Didier Defer},
year = {2018},
date = {2018-01-01},
booktitle = {Conférence IBPSA France 2018},
organization = {Bordeaux},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER5 Auteurs : Brachelet, Franck; Lapeyronnie, Damien; Antczak, Emmanuel; Pallix, Didier Etude du comportement hygrothermique d'un habitat neuf construit en pierre naturelle Journées nationales de maçonnerie, Iffstar Marne la Vallee 2018, (ACTN). @conference{,
title = {Etude du comportement hygrothermique d'un habitat neuf construit en pierre naturelle},
author = {Franck Brachelet and Damien Lapeyronnie and Emmanuel Antczak and Didier Pallix},
year = {2018},
date = {2018-02-01},
booktitle = {Journées nationales de maçonnerie},
organization = {Iffstar Marne la Vallee},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER5 Auteurs : Colli, Carolina; Bataille, Alain; Buyle-Bodin, François On to the development of a simplified tool to help decision making on single family-houses refurbishment : the Bat-eco 2 project 2018. @conference{Colli2018b,
title = {On to the development of a simplified tool to help decision making on single family-houses refurbishment : the Bat-eco 2 project},
author = {Carolina Colli and Alain Bataille and François Buyle-Bodin},
year = {2018},
date = {2018-01-01},
journal = {Circular economy on Life Cycle approches, int. conf. Lille, France},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2018Conférence ER5 Auteurs : Colli, Carolina; Bataille, Alain; Antczak, Emmanuel; Buyle-Bodin, François Life Cycle Assessment of a French Single-Family House Refurbishment: The "bat-Eco2" Case Study vol. 69, 2018, (cited By 2). Liens @conference{Colli2018160b,
title = {Life Cycle Assessment of a French Single-Family House Refurbishment: The "bat-Eco2" Case Study},
author = {Carolina Colli and Alain Bataille and Emmanuel Antczak and François Buyle-Bodin},
url = {https://www.scopus.com/inward/record.uri?eid=2-s2.0-85047094312&doi=10.1016%2fj.procir.2017.11.043&partnerID=40&md5=b53fe58320a05311e9468c7d10b99b8c},
doi = {10.1016/j.procir.2017.11.043},
year = {2018},
date = {2018-01-01},
journal = {Procedia CIRP},
volume = {69},
pages = {160-165},
note = {cited By 2},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Vogt-Wu, Tingting; Antczak, Emmanuel; Brachelet, Franck; Defer, Didier A simple inverse method for monitoring the thermal characteristics of the limestone in an individual house International COnference on Materials ans Energy (ICOME 2017), Tianjin China 2017, (ACTI). @conference{Wu2017,
title = {A simple inverse method for monitoring the thermal characteristics of the limestone in an individual house},
author = {Tingting Vogt-Wu and Emmanuel Antczak and Franck Brachelet and Didier Defer},
year = {2017},
date = {2017-01-01},
booktitle = {International COnference on Materials ans Energy (ICOME 2017)},
organization = {Tianjin China},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Chikh, Salah; yahia Lakhdari, Abdelhamid; Younsi, Zohir Non-Isothermal Phase Change Material in a Building Wall Under South Mediterranean Climate 10th International Conference on Computational Heat, Mass and Momentum Transfer (ICCHM2T 2017), Seoul, Korea May 28 - June 1, 2017., 2017, (ACTI). @conference{Chikh2017,
title = {Non-Isothermal Phase Change Material in a Building Wall Under South Mediterranean Climate},
author = {Salah Chikh and Abdelhamid yahia Lakhdari and Zohir Younsi},
year = {2017},
date = {2017-01-01},
booktitle = {10th International Conference on Computational Heat, Mass and Momentum Transfer (ICCHM2T 2017), Seoul, Korea May 28 - June 1, 2017.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Koufi, Lounes; Cherif, Yassine; Younsi, Zohir; Naji, Hassane Simulation numérique du transport d'un aéro-contaminant en convection naturelle 2017, (ACTI). @conference{Koufi2017a,
title = {Simulation numérique du transport d'un aéro-contaminant en convection naturelle},
author = {Lounes Koufi and Yassine Cherif and Zohir Younsi and Hassane Naji},
year = {2017},
date = {2017-01-01},
journal = {XIIIème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes, 22-24 mai 2017, LUSAC, Saint-Lô, France},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Koufi, Lounes; Younsi, Zohir; Naji, Hassane Numerical investigation of turbulent double-diffusive mixed convection in a slot ventilated enclosure with supply air flow ports 23ème Congrès Français de Mécanique 2017, Lille, France, 28 Août-01 septembre 2017., 2017, (ACTN). @conference{Koufi2017b,
title = {Numerical investigation of turbulent double-diffusive mixed convection in a slot ventilated enclosure with supply air flow ports},
author = {Lounes Koufi and Zohir Younsi and Hassane Naji},
year = {2017},
date = {2017-01-01},
booktitle = {23ème Congrès Français de Mécanique 2017, Lille, France, 28 Août-01 septembre 2017.},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Bekkouche, Mohammed Samai Rachid Djeffal Mohamed; Younsi, Zohir; Benamrane, Nacer; Cherier, Mohamed Amélioration du confort par l’intégration des matériaux intelligents (MCP) 1st Int. Seminar on the Apport of the Simulation in Technological Innovation, Ghardaïa, Algeria, March, 07-08-2017., 2017, (ACTI). @conference{RachidDjeffal2017,
title = {Amélioration du confort par l’intégration des matériaux intelligents (MCP)},
author = {Mohammed Samai Rachid Djeffal Mohamed Bekkouche and Zohir Younsi and Nacer Benamrane and Mohamed Cherier},
year = {2017},
date = {2017-01-01},
booktitle = {1st Int. Seminar on the Apport of the Simulation in Technological Innovation, Ghardaïa, Algeria, March, 07-08-2017.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Younsi, Zohir; Naji, Hassane Simulation numérique du comportement thermique d’un mur de brique intégrant des microcapsules de matériaux à changement de phase via la méthode enthalpique Congrès Français de Thermique 2017, Marseille, France, 30 mai - 2 juin 2017., 2017, (ACTN). @conference{Younsi2017,
title = {Simulation numérique du comportement thermique d’un mur de brique intégrant des microcapsules de matériaux à changement de phase via la méthode enthalpique},
author = {Zohir Younsi and Hassane Naji},
year = {2017},
date = {2017-01-01},
booktitle = {Congrès Français de Thermique 2017, Marseille, France, 30 mai - 2 juin 2017.},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Cherif, Yassine; Koufi, Loune; Younsi, Zohir; Naji, Hassane Simulation numérique de la convection thermosoultale du transport d'un aéro-contaminant dans une chambre fermée 13ème Colloque Int. Franco-Québécois (CIFQ 2017), 22 - 24, 2017, Saint-Lô, France, 2017, (ACTI). @conference{Cherif2017,
title = {Simulation numérique de la convection thermosoultale du transport d'un aéro-contaminant dans une chambre fermée},
author = {Yassine Cherif and Loune Koufi and Zohir Younsi and Hassane Naji},
year = {2017},
date = {2017-01-01},
booktitle = {13ème Colloque Int. Franco-Québécois (CIFQ 2017), 22 - 24, 2017, Saint-Lô, France},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Antczak, Emmanuel; Asli, Mounir; Brachelet, Franck; Brue, Flore; Defer, Didier; Lucas, Alain Monitoring and thermal characterization of flax shives for building thermal insulation 2nd International Conference on Bio-based Building Materials 2017, Clermont - Ferrand 2017, (ACTI). @conference{Antczak2017,
title = {Monitoring and thermal characterization of flax shives for building thermal insulation},
author = {Emmanuel Antczak and Mounir Asli and Franck Brachelet and Flore Brue and Didier Defer and Alain Lucas},
year = {2017},
date = {2017-01-01},
booktitle = {2nd International Conference on Bio-based Building Materials 2017},
organization = {Clermont - Ferrand},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Brachelet, Franck; Asli, Mounir; Antczak, Emmanuel; Brue, Flore; Defer, Didier; Lucas, Alain Hygrothermal behavior of flax shives used as insulation material in an attic of a traditional house International COnference on Materials ans Energy (ICOME 2017), Tianjin China 2017, (ACTI). @conference{Brachelet2017,
title = {Hygrothermal behavior of flax shives used as insulation material in an attic of a traditional house},
author = {Franck Brachelet and Mounir Asli and Emmanuel Antczak and Flore Brue and Didier Defer and Alain Lucas},
year = {2017},
date = {2017-01-01},
booktitle = {International COnference on Materials ans Energy (ICOME 2017)},
organization = {Tianjin China},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Asli, Mounir; Antczak, Emmanuel; Brachelet, Franck; Defer, Didier; Chauchois, Alexis Hygrothermal behaviour of a hemp concrete block, experimental and numerical results 2nd International Conference on Bio-based Building Materials, Clermont-Ferrand 2017 2017, (ACTI). @conference{Asli2017b,
title = {Hygrothermal behaviour of a hemp concrete block, experimental and numerical results},
author = {Mounir Asli and Emmanuel Antczak and Franck Brachelet and Didier Defer and Alexis Chauchois},
year = {2017},
date = {2017-01-01},
booktitle = {2nd International Conference on Bio-based Building Materials},
organization = {Clermont-Ferrand 2017},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2017Conférence ER5 Auteurs : Antczak, Emmanuel; Asli, Mounir; Brachelet, Franck; Brue, Flore; Defer, Didier Etude du comportement hygrothermique d’anas de lin utilisés comme isolant en vrac de combles perdus Conférence Francophone de l'International Building Performance Simulation Association, vol. 99, 2017, ISSN: 0008-8846, (AFF). Résumé | Liens @conference{ANTC2018I,
title = {Etude du comportement hygrothermique d’anas de lin utilisés comme isolant en vrac de combles perdus},
author = {Emmanuel Antczak and Mounir Asli and Franck Brachelet and Flore Brue and Didier Defer},
url = {http://www.sciencedirect.com/science/article/pii/S0008884617304428},
doi = {https://doi.org/10.1016/j.cemconres.2017.04.017},
issn = {0008-8846},
year = {2017},
date = {2017-01-01},
booktitle = {Conférence Francophone de l'International Building Performance Simulation Association},
journal = {Cement and Concrete Research},
volume = {99},
pages = {70 - 85},
abstract = {This experimental study imposes limited relative humidity (RH) gradients to small mature concrete samples, at a constant temperature T = 20, 50 or 80°C. Mass loss and shrinkage are recorded until stabilization at each RH and T, for up to 1991days. Firstly, our mass loss data are consistent with those presented in former research (on different samples of the same batch). After presenting and analyzing shrinkage kinetics, experimental data are fitted with usual models for shrinkage prediction, at each temperature of 20, 50 and 80°C. An adequate match is obtained by combining capillarity (i.e. Vlahinic's model coupling poro-elastic constants and water saturation level) and desorption (Bangham's equation). Subsequently, relative mass variation (RMV) is plotted against shrinkage εshdry data. Three distinct phases are obtained at 20 or 50°C and down to 30%RH; up to four distinct phases are observed at T = 80°C and down to 12%RH. The latter are confirmed by experiments on (60°C; 7%RH) dried concrete. The four phases in the (RMV,εshdry) diagram are interpreted against shrinkage data on mature cement paste dried at 60°C; 7%RH and against the literature.},
note = {AFF},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
This experimental study imposes limited relative humidity (RH) gradients to small mature concrete samples, at a constant temperature T = 20, 50 or 80°C. Mass loss and shrinkage are recorded until stabilization at each RH and T, for up to 1991days. Firstly, our mass loss data are consistent with those presented in former research (on different samples of the same batch). After presenting and analyzing shrinkage kinetics, experimental data are fitted with usual models for shrinkage prediction, at each temperature of 20, 50 and 80°C. An adequate match is obtained by combining capillarity (i.e. Vlahinic's model coupling poro-elastic constants and water saturation level) and desorption (Bangham's equation). Subsequently, relative mass variation (RMV) is plotted against shrinkage εshdry data. Three distinct phases are obtained at 20 or 50°C and down to 30%RH; up to four distinct phases are observed at T = 80°C and down to 12%RH. The latter are confirmed by experiments on (60°C; 7%RH) dried concrete. The four phases in the (RMV,εshdry) diagram are interpreted against shrinkage data on mature cement paste dried at 60°C; 7%RH and against the literature. |
2017Conférence ER5 Auteurs : Aljer, Ammar; Loriot, Marine; Shahrour, Isam; Benyahya, Afif Smart system for social housing monitoring 2017 Sensors Networks Smart and Emerging Technologies (SENSET), IEEE, Beirut, France, 2017, (COM). Liens @conference{aljer:hal-03526412,
title = {Smart system for social housing monitoring},
author = {Ammar Aljer and Marine Loriot and Isam Shahrour and Afif Benyahya},
url = {https://hal-univ-artois.archives-ouvertes.fr/hal-03526412},
doi = {10.1109/senset.2017.8125057},
year = {2017},
date = {2017-09-01},
urldate = {2017-09-01},
booktitle = {2017 Sensors Networks Smart and Emerging Technologies (SENSET)},
pages = {1-4},
publisher = {IEEE},
address = {Beirut, France},
note = {COM},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Ba, Amadou; Lavie, Antoine; Leblanc, Alexandre Soft 3D printed membrane type-acoustic metamaterials 23rd International Congress on Sound & Vibration, Ath`enes, Gr`ece (10-14 juillet 2016), 2016, (ACTI). @conference{Ba2016,
title = {Soft 3D printed membrane type-acoustic metamaterials},
author = {Amadou Ba and Antoine Lavie and Alexandre Leblanc},
year = {2016},
date = {2016-01-01},
booktitle = {23rd International Congress on Sound & Vibration, Ath`enes, Gr`ece (10-14 juillet 2016)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Leblanc, Alexandre; Lavie, Antoine 3D printed membrane-type acoustic metamaterials with structured masses J. Acoust. Soc. Am., 140, n$,^circ$4, 3104, Honolulu, USA, vol. 140, no. 4, ASA, 2016, (ACTI). Liens @conference{Leblanc2016,
title = {3D printed membrane-type acoustic metamaterials with structured masses},
author = {Alexandre Leblanc and Antoine Lavie},
doi = {http://dx.doi.org/10.1121/1.4969687},
year = {2016},
date = {2016-01-01},
booktitle = {J. Acoust. Soc. Am., 140, n$,^circ$4, 3104, Honolulu, USA},
volume = {140},
number = {4},
pages = {3104},
publisher = {ASA},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Lefebvre, Jérôme; Leblanc, Alexandre; Genestie, Benoît; Chartier, Thierry; Lavie, Antoine Acoustic properties of aerogel encapsulated by macroporous cellulose 23rd International Congress on Sound & Vibration, Athènes, Grèce, 2016, (ACTI). @conference{Lefebvre2016,
title = {Acoustic properties of aerogel encapsulated by macroporous cellulose},
author = {Jérôme Lefebvre and Alexandre Leblanc and Benoît Genestie and Thierry Chartier and Antoine Lavie},
year = {2016},
date = {2016-01-01},
booktitle = {23rd International Congress on Sound & Vibration, Athènes, Grèce},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Sastre, Maria Teresa Tejedor; Leblanc, Alexandre; Lavie, Antoine; Vanhille, Christian Finite-element simulations of nonlinear focused ultrasound in bubbly liquids 23rd International Congress on Sound & Vibration, Ath`enes, Gr`ece (10-14 juillet 2016), 2016, (ACTI). @conference{TejedorSastre2016,
title = {Finite-element simulations of nonlinear focused ultrasound in bubbly liquids},
author = {Maria Teresa Tejedor Sastre and Alexandre Leblanc and Antoine Lavie and Christian Vanhille},
year = {2016},
date = {2016-01-01},
booktitle = {23rd International Congress on Sound & Vibration, Ath`enes, Gr`ece (10-14 juillet 2016)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Koufi, Lounes; Younsi, Zohir; Cherif, Yassine; Naji, Hassane Numerical investigation and analysis of indoor air quality in a room based on Impinging jet ventilation Int. Conference On Materials and Energy ICOME’16, La Rochelle, France, 17-20 May 2016., 2016, (ACTI). @conference{Koufi2016,
title = {Numerical investigation and analysis of indoor air quality in a room based on Impinging jet ventilation},
author = {Lounes Koufi and Zohir Younsi and Yassine Cherif and Hassane Naji},
year = {2016},
date = {2016-01-01},
booktitle = {Int. Conference On Materials and Energy ICOME’16, La Rochelle, France, 17-20 May 2016.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Koufi, Lounes; Cherif, Yassine; Younsi, Zohir; Naji, Hassane Simulation numérique du transport d'un aérocontaminant dans une cavité ventilée Congrès Français de Thermique 2016, Toulouse, France, 31 Mai-03 Juin 2016., 2016, (ACTN). @conference{Koufi2016a,
title = {Simulation numérique du transport d'un aérocontaminant dans une cavité ventilée},
author = {Lounes Koufi and Yassine Cherif and Zohir Younsi and Hassane Naji},
year = {2016},
date = {2016-01-01},
booktitle = {Congrès Français de Thermique 2016, Toulouse, France, 31 Mai-03 Juin 2016.},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Bekkouche, Mohammed Samai Rachid Djeffal Mohamed; Younsi, Zohir; Benamrane, Nacer; Cherier, Mohamed Comportement thermique d’une maison inerte dans une période d'intersaison propice à l’intégration des MCPs 4th Int. Seminar on New and Renewable Energies, Ghardaïa, Algérie 24 et 25 Octobre 2016., 2016, (ACTI). @conference{MCPs2016,
title = {Comportement thermique d’une maison inerte dans une période d'intersaison propice à l’intégration des MCPs},
author = {Mohammed Samai Rachid Djeffal Mohamed Bekkouche and Zohir Younsi and Nacer Benamrane and Mohamed Cherier},
year = {2016},
date = {2016-01-01},
booktitle = {4th Int. Seminar on New and Renewable Energies, Ghardaïa, Algérie 24 et 25 Octobre 2016.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Masson, François-Xavier; Lefer, Henri-Bertrand; Boulemia, Cherif; Naji, Hassane Hydraulic characterization of porous materials using a rainfall simulator to model flows in natural and artificial non-saturated materials 49th Int. Conference on Water Management Modeling (ICWMM), 24 - 25 February 2016, Toronto, Canada, 2016, (ACTI). Liens @conference{Masson2016,
title = {Hydraulic characterization of porous materials using a rainfall simulator to model flows in natural and artificial non-saturated materials},
author = {François-Xavier Masson and Henri-Bertrand Lefer and Cherif Boulemia and Hassane Naji},
url = {http://www.icwmm.org/},
year = {2016},
date = {2016-01-01},
booktitle = {49th Int. Conference on Water Management Modeling (ICWMM), 24 - 25 February 2016, Toronto, Canada},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Yehya, Alissar; Naji, Hassane Towards the numerical investigation of convective solid/liquid phase change in porous media via a new gray lattice Boltzmann model 12th Int. Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2016), 11 - 13 July 2016, Malaga, Spain, no. paper # 1570233925, 2016, (ACTI). @conference{Yehya2016,
title = {Towards the numerical investigation of convective solid/liquid phase change in porous media via a new gray lattice Boltzmann model},
author = {Alissar Yehya and Hassane Naji},
year = {2016},
date = {2016-01-01},
booktitle = {12th Int. Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT 2016), 11 - 13 July 2016, Malaga, Spain},
number = {paper # 1570233925},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Derbal, Radhouan; Lucas, Alain; Brachelet, Franck; Defer, Didier; Antczak, Emmanuel Réhafutur : In situ instrumentation for a comprehensive building analysis International Conference on Materials and Energy 2016, La Rochelle France 2016, (ACTI). @conference{Derbal2016a,
title = {Réhafutur : In situ instrumentation for a comprehensive building analysis},
author = {Radhouan Derbal and Alain Lucas and Franck Brachelet and Didier Defer and Emmanuel Antczak},
year = {2016},
date = {2016-01-01},
booktitle = {International Conference on Materials and Energy 2016},
organization = {La Rochelle France},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2016Conférence ER5 Auteurs : Asli, Mounir; Brachelet, Franck; Derbal, Radhouan; Chauchois, Alexis; Antczak, Emmanuel; Defer, Didier Numerical and experimental investigation of simultaneous heat and mass transfer within bio-based material ECOS 2016, Portorož Slovenia 2016, (ACTI). @conference{Asli2016b,
title = {Numerical and experimental investigation of simultaneous heat and mass transfer within bio-based material},
author = {Mounir Asli and Franck Brachelet and Radhouan Derbal and Alexis Chauchois and Emmanuel Antczak and Didier Defer},
year = {2016},
date = {2016-01-01},
booktitle = {ECOS 2016},
organization = {Portorož Slovenia},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conférence ER5 Auteurs : Bédécarrats, Jean-Pierre; David, Damien; Defer, Didier; Dumas, Jean-Pierre; Franquet, Erwin; Gibout, Stéphane; Haillot, Didier; Johannes, Kévyn; Joulin, Annabelle; Kuznik, Frédéric; Lassue, Stéphane; Maréchal, William; Naji, Hassane; Tittelein, Pierre; Zalewski, Laurent Caractérisation des matériaux à changement de phase pour la simulation thermique des bâtiments actes du Congrès Français de Thermique 2015, La Rochelle, 2015, (ACTN). @conference{bede2015a,
title = {Caractérisation des matériaux à changement de phase pour la simulation thermique des bâtiments},
author = {Jean-Pierre Bédécarrats and Damien David and Didier Defer and Jean-Pierre Dumas and Erwin Franquet and Stéphane Gibout and Didier Haillot and Kévyn Johannes and Annabelle Joulin and Frédéric Kuznik and Stéphane Lassue and William Maréchal and Hassane Naji and Pierre Tittelein and Laurent Zalewski},
year = {2015},
date = {2015-05-01},
booktitle = {actes du Congrès Français de Thermique 2015},
address = {La Rochelle},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conférence ER5 Auteurs : Bédécarrats, Jean-Pierre; David, Damien; Defer, Didier; Dumas, Jean-Pierre; Franquet, Erwin; Gibout, Stéphane; Haillot, Didier; Johannes, Kevyn; Joulin, Annabelle; Kuznik, Frédéric; Lassue, Stéphane; Maréchal, William; Naji, Hassane; Tittelein, Pierre; Zalewski, Laurent Phase change materials characterisation and applications to the thermal simulation of buildings Proceedings of ECOS 2015, Pau, 2015, (ACTI). Résumé @conference{bede2015b,
title = {Phase change materials characterisation and applications to the thermal simulation of buildings},
author = {Jean-Pierre Bédécarrats and Damien David and Didier Defer and Jean-Pierre Dumas and Erwin Franquet and Stéphane Gibout and Didier Haillot and Kevyn Johannes and Annabelle Joulin and Frédéric Kuznik and Stéphane Lassue and William Maréchal and Hassane Naji and Pierre Tittelein and Laurent Zalewski},
year = {2015},
date = {2015-07-01},
booktitle = {Proceedings of ECOS 2015},
address = {Pau},
abstract = {We aim here at presenting the main results of the Stock-E MICMCP ANR
project whose principal goal is the correct thermophysical characterisation
of phase change materials in order to have reliable inputs when considering
numerical simulations of thermal behaviour of buildings. Firstly,
we will present the method developed to determine the function governing
the enthalpy with respect to the temperature of the material. It
is based on the use of experimental measurements together with an
inversion method: by comparing the heat flow with a simulated one,
obtained by assuming an a priori formulation of the enthalpy (which
set some basic thermodynamical constraints), we may calculate the
numerical values of the associated parameters. Secondly, we will
show that this method can be extended to macroscopic and heterogeneous
materials, which are more representative of real samples. Eventually,
we will show on some examples of thermal buildings simulations the
necessity to correctly represent the PCM behaviour if one wants to
use them in the future so as to save energy and for a better comfort.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
We aim here at presenting the main results of the Stock-E MICMCP ANR
project whose principal goal is the correct thermophysical characterisation
of phase change materials in order to have reliable inputs when considering
numerical simulations of thermal behaviour of buildings. Firstly,
we will present the method developed to determine the function governing
the enthalpy with respect to the temperature of the material. It
is based on the use of experimental measurements together with an
inversion method: by comparing the heat flow with a simulated one,
obtained by assuming an a priori formulation of the enthalpy (which
set some basic thermodynamical constraints), we may calculate the
numerical values of the associated parameters. Secondly, we will
show that this method can be extended to macroscopic and heterogeneous
materials, which are more representative of real samples. Eventually,
we will show on some examples of thermal buildings simulations the
necessity to correctly represent the PCM behaviour if one wants to
use them in the future so as to save energy and for a better comfort. |
2015Conférence ER5 Auteurs : Carpentier, Olivier; Chartier, Thierry; Antczak, Emmanuel; DESCAMPS, Thierry; PARYS, Laurent VAN Active and quantitative infrared thermography using frequential analysis applied to the monitoring of historic timber structures 2015, (ACTI). @conference{carp2015a,
title = {Active and quantitative infrared thermography using frequential analysis applied to the monitoring of historic timber structures},
author = {Olivier Carpentier and Thierry Chartier and Emmanuel Antczak and Thierry DESCAMPS and Laurent VAN PARYS},
year = {2015},
date = {2015-01-01},
journal = {3rd International Conference on Structural Health Assessment ot Timber Structures, Wroclaw, Poland, September 9-11, 2015},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conférence ER5 Auteurs : Carpentier, Olivier; Chartier, Thierry; Antczak, Emmanuel; Descamps, Thierry; Van-Parys, Laurent Structural analysis of porous media by means of thermal methods: theory and monitoring equipment 3rd International Conference on Structural Health Assessment ot Timber Structures, Wroclaw, Poland, September 9-11, 2015, (ACTI). @conference{carp2015b,
title = {Structural analysis of porous media by means of thermal methods: theory and monitoring equipment},
author = {Olivier Carpentier and Thierry Chartier and Emmanuel Antczak and Thierry Descamps and Laurent Van-Parys},
year = {2015},
date = {2015-01-01},
booktitle = {3rd International Conference on Structural Health Assessment ot Timber Structures, Wroclaw, Poland, September 9-11},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conférence ER5 Auteurs : DESCAMPS, Thierry; AVEZ, Coralie; Carpentier, Olivier; Antczak, Emmanuel; JEONG, Gi Young Historic timber roofs modelling: prosthesis and resin repairs 3rd International Conference on Structural Health Assessment ot Timber Structures, Wroclaw, Poland, September 9-11, 2015, 2015, (ACTI). @conference{desc2015a,
title = {Historic timber roofs modelling: prosthesis and resin repairs},
author = {Thierry DESCAMPS and Coralie AVEZ and Olivier Carpentier and Emmanuel Antczak and Gi Young JEONG},
year = {2015},
date = {2015-01-01},
booktitle = {3rd International Conference on Structural Health Assessment ot Timber Structures, Wroclaw, Poland, September 9-11, 2015},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conférence ER5 Auteurs : Gloriant, Francois; Joulin, Annabelle; Tittelein, Pierre; Lassue, Stéphane L'étude des performances d'une fenêtre ventilée pour la récupération de chaleur par l'air neuf de ventilation Actes du CIFQ 2015, Sherbrook, 2015, (ACTI). Résumé @conference{gloriant_etude_2015,
title = {L'étude des performances d'une fenêtre ventilée pour la récupération de chaleur par l'air neuf de ventilation},
author = {Francois Gloriant and Annabelle Joulin and Pierre Tittelein and Stéphane Lassue},
year = {2015},
date = {2015-06-01},
booktitle = {Actes du CIFQ 2015},
address = {Sherbrook},
abstract = {Cette communication a pour objet l’étude numérique des performances
d’une fen^etre ventilée (pariétodynamique), dont le
principe repose sur la circulation de l’air neuf de ventilation
entre les vitrages avant son introduction dans un logement. L'étude
est réalisée `a l'aide d'un code de calcul commercial
de mécanique des fluides numériques (MFN) permettant la mise
au point d'un mod`ele simplifié adapté `a la simulation
thermique des b^atiments. A partir des résultats de simulation,
des études paramétriques sont effectuées afin de rendre
compte des facteurs influant sur les performances énergétiques
de la fen^etre tels que : •le débit d’air ; •les épaisseurs
de cavité ; •la présence de rev^etements faiblement
émissifs ; •les dimensions de la surface vitrée.},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
Cette communication a pour objet l’étude numérique des performances
d’une fen^etre ventilée (pariétodynamique), dont le
principe repose sur la circulation de l’air neuf de ventilation
entre les vitrages avant son introduction dans un logement. L'étude
est réalisée `a l'aide d'un code de calcul commercial
de mécanique des fluides numériques (MFN) permettant la mise
au point d'un mod`ele simplifié adapté `a la simulation
thermique des b^atiments. A partir des résultats de simulation,
des études paramétriques sont effectuées afin de rendre
compte des facteurs influant sur les performances énergétiques
de la fen^etre tels que : •le débit d’air ; •les épaisseurs
de cavité ; •la présence de rev^etements faiblement
émissifs ; •les dimensions de la surface vitrée. |
2015Conférence ER5 Auteurs : Gloriant, Francois; Tittelein, Pierre; Joulin, Annabelle; Lassue, Stéphane Etude expérimentale d'une fenêtre parietodynamique de type Paziaud actes du Congrès Français de Thermique 2015, La Rochelle, 2015, (ACTN). @conference{gloriant_etude_2015-1,
title = {Etude expérimentale d'une fenêtre parietodynamique de type Paziaud},
author = {Francois Gloriant and Pierre Tittelein and Annabelle Joulin and Stéphane Lassue},
year = {2015},
date = {2015-05-01},
booktitle = {actes du Congrès Français de Thermique 2015},
address = {La Rochelle},
note = {ACTN},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
2015Conférence ER5 Auteurs : Gloriant, Francois; Tittelein, Pierre; Joulin, Annabelle; Lassue, Stéphane Study Of Ŧhe Performances Of A Supply-Air Window For Air Renewal Pre-Ħeating Proceedings of IBPC 2015, Torino (Italy), 2015, (ACTI). Résumé @conference{gloriant_study_2015,
title = {Study Of Ŧhe Performances Of A Supply-Air Window For Air Renewal Pre-Ħeating},
author = {Francois Gloriant and Pierre Tittelein and Annabelle Joulin and Stéphane Lassue},
year = {2015},
date = {2015-06-01},
booktitle = {Proceedings of IBPC 2015},
address = {Torino (Italy)},
abstract = {The principle of a supply-air window is based on the air renewal circulation
between the glazings of a window before entering home. We study in
this work the Paziaud® window composed of three glazings forming
a U-shaped channel. The air warms up by recovering some part of the
heat losses from the building and also by solar radiation absorbed
through the glasses. This system generally works in forced convection
by association with an air extraction system. This type of component
is not embedded in usual dynamic tools for building thermal simulation.
A major reason of this lack is that the heat transfers through the
walls and the air exchange are treated separately. Moreover, this
particular system is characterized by different heat fluxes if we
consider the inner or the outer surface of the component. Our contribution
is based on an original and appropriate representation of convective
heat transfer in asymmetrically heated air layers. We offer a #simplified#
model that can be easily implemented in dynamic simulation tools.
This model is compared CFD simulations. From this model, parametric
studies are performed to look for the parameters influencing the
performance of the Paziaud® window: we show here that boundary conditions
in temperatures, the thickness of the cavities, low emissivity coatings
and the glazing area have significant effects on the performance
criteria. We perform the parametric study on the basis of indicators
specifically defined for the supply-air window},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
The principle of a supply-air window is based on the air renewal circulation
between the glazings of a window before entering home. We study in
this work the Paziaud® window composed of three glazings forming
a U-shaped channel. The air warms up by recovering some part of the
heat losses from the building and also by solar radiation absorbed
through the glasses. This system generally works in forced convection
by association with an air extraction system. This type of component
is not embedded in usual dynamic tools for building thermal simulation.
A major reason of this lack is that the heat transfers through the
walls and the air exchange are treated separately. Moreover, this
particular system is characterized by different heat fluxes if we
consider the inner or the outer surface of the component. Our contribution
is based on an original and appropriate representation of convective
heat transfer in asymmetrically heated air layers. We offer a #simplified#
model that can be easily implemented in dynamic simulation tools.
This model is compared CFD simulations. From this model, parametric
studies are performed to look for the parameters influencing the
performance of the Paziaud® window: we show here that boundary conditions
in temperatures, the thickness of the cavities, low emissivity coatings
and the glazing area have significant effects on the performance
criteria. We perform the parametric study on the basis of indicators
specifically defined for the supply-air window |
2015Conférence ER5 Auteurs : Kenai, Mohammed-Amine; Libessart, Laurent; Lassue, Stéphane; Defer, Didier Performance énergétique des parois végétalisées XIIeme Colloque Interuniversitaire Franco-Québécois Sur la Thermique des Systèmes (CIFQ 2015), 2015, (ACTI). @conference{Kena2015A,
title = {Performance énergétique des parois végétalisées},
author = {Mohammed-Amine Kenai and Laurent Libessart and Stéphane Lassue and Didier Defer},
year = {2015},
date = {2015-01-01},
booktitle = {XIIeme Colloque Interuniversitaire Franco-Québécois Sur la Thermique des Systèmes (CIFQ 2015)},
note = {ACTI},
keywords = {ER5},
pubstate = {published},
tppubtype = {conference}
}
|
