Publications

@article{ABDELLATIF2022111692,

title = {A thermal control methodology based on a machine learning forecasting model for indoor heating},

author = {Makram Abdellatif and Julien Chamoin and Jean-Marie Nianga and Didier Defer},

url = {https://www.sciencedirect.com/science/article/pii/S0378778821009762},

doi = {https://doi.org/10.1016/j.enbuild.2021.111692},

issn = {0378-7788},

year  = {2022},

date = {2022-01-01},

urldate = {2022-01-01},

journal = {Energy and Buildings},

volume = {255},

pages = {111692},

abstract = {To take advantage of the data generated in buildings, this document proposes a methodology based on a machine learning model to improve thermal comfort and energy efficiency. This methodology uses measured data (e.g., indoor/outdoor temperature, relative humidity, etc.) and forecast data (e.g., meteorological data) to train a multiple linear regression model to forecast the indoor temperature of the space under study. Using the genetic algorithm optimization method, this model is then used to evaluate the different heating strategies generated. For each strategy, a score is assigned according to user-defined criteria in order to prioritize them and select the best one. By studying an office building simulated under the TRNSYS software, a multiple linear regression model was implemented with errors less than 1% and an adjusted R2 coefficient close to 0.9. Compared to a conventional heating strategy, this methodology can improve thermal comfort by up to 43%.},

note = {ACL},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{naji:hal-03520975,

title = {On Numerical Modeling of Thermal Performance Enhancementof a Heat Thermal Energy Storage System Using a Phase Change Material and a Porous Foam},

author = {Riheb Mabrouk and Hassane Naji and Hacen Dhahri and Zouhir Younsi},

url = {https://hal.archives-ouvertes.fr/hal-03520975},

doi = {10.3390/computation10010003},

year  = {2022},

date = {2022-01-01},

urldate = {2022-01-01},

journal = {Computation},

volume = {10},

number = {1},

pages = {3},

publisher = {MDPI},

note = {ACL},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{Pestre2022,

title = {Multiphysical Characteristics of Limestones for Energy-Efficient and Sustainable Buildings Components},

author = {Tristan Pestre and Emmanuel Antczak and Franck Brachelet and Didier Pallix},

url = {https://doi.org/10.1061/(ASCE)MT.1943-5533.0004158},

doi = {10.1061/(ASCE)MT.1943-5533.0004158},

year  = {2022},

date = {2022-01-01},

urldate = {2022-01-01},

journal = {Journal of Materials in Civil Engineering},

volume = {34},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{CHAATOUF2022104075,

title = {Parametric analysis of a sensible heat storage unit in an indirect solar dryer using computational fluid dynamics},

author = {Dounia Chaatouf and Mourad Salhi and Benyounes Raillani and Samir Amraqui and Ahmed Mezrhab and Hassane Naji},

url = {https://www.sciencedirect.com/science/article/pii/S2352152X22001128},

doi = {https://doi.org/10.1016/j.est.2022.104075},

issn = {2352-152X},

year  = {2022},

date = {2022-01-01},

journal = {Journal of Energy Storage},

volume = {49},

pages = {104075},

abstract = {The non-continuity of the drying process after sunset is one of the most significant limitations with solar dryers that has an impact on product quality and drying time. To overcome this problem, we installed a Thermal Energy Storage (TES) unit in an indirect solar dryer. Given the economic advantages offered by Sensible Heat Storage (SHS) systems and their availability, they are the best option to consider in a drying application. In this paper, we investigated a SHS unit integrated within a solar dryer under real meteorological conditions in eastern Morocco. The solar dryer with a storage system was simulated using the Computational Fluid Dynamics (CFD) approach, which was validated using experimental data from the literature. The research is mainly focused on the amount of material required, the proper porosity of the packed bed, and the overall performance of the solar dryer for various types of SHS materials. The obtained results proved that when compared to the case without storage, the efficiency of the solar dryer with sensible heat storage increased by about 2.47% at night. Regarding the study of different materials, granite stones showed better performance with a porosity of 40% and a packed bed thickness of 15 cm, where the temperature differences between the two cases with and without storage reached almost 5° at night.},

note = {ACL},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{antczak:hal-03637177,

title = {An efficient and simple method for investigating dynamic heat transfer in multilayered building components},

author = {Emmanuel Antczak and Joseph Dgheim and Yassine Cherif and Emilio Sassine},

url = {https://hal.archives-ouvertes.fr/hal-03637177},

doi = {10.1504/ijmri.2022.10046134},

year  = {2022},

date = {2022-04-04},

urldate = {2022-04-01},

journal = {International Journal of Masonry Research and Innovation},

volume = {7},

number = {3},

pages = {281},

publisher = {Inderscience publishers},

note = {ACL},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{toifane:hal-03654178,

title = {Thermophysical Characterization of a Thermoregulating Interior Coating Containing a Bio-Sourced Phase Change Material},

author = {Hachmi Toifane and Pierre Tittelein and Yassine Cherif and Laurent Zalewski and Hervé Leuck},

url = {https://hal.archives-ouvertes.fr/hal-03654178},

doi = {10.3390/app12083827},

year  = {2022},

date = {2022-04-01},

urldate = {2022-04-01},

journal = {Applied Sciences},

volume = {12},

number = {8},

pages = {3827},

publisher = {MDPI},

note = {ACL},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{JBMS4500,

title = {Analysis of heat transfer phenomena inside concrete hollow blocks},

author = {Joelle Al-Fakhoury and Emilio Sassine and Yassine Cherif and Emmanuel Antczak and Joseph Dgheim and Thierry Chartier},

url = {https://ojs.bilpublishing.com/index.php/jbms/article/view/4500},

doi = {10.30564/jbms.v4i1.4500},

issn = {2630-5216},

year  = {2022},

date = {2022-01-01},

urldate = {2022-01-01},

journal = {Journal of Building Material Science},

volume = {4},

number = {1},

abstract = {During both hot and cold seasons, masonry walls play an important role in the thermal performance between the interior and the exterior of occupied spaces. It is thus essential to analyze the thermal behavior at the hollow block’s level in order to better understand the temperature and heat flux distribution in its structure and potentially limit as much as possible the heat transfer through the block.In this scope, this paper offers an experimental and numerical in-depth analysis of heat transfer phenomena inside a hollow block using a dedicated experimental setup including a well-insulated reference box and several thermocouples and fluxmeters distributed at the boundaries and inside the hollow block. The block was then numerically 3D modelled and simulated using COMSOL Multiphysics under the same conditions, properties, and dimensions as the experimentally tested block. The comparison between the numerical and experimental results provides very satisfactory results with relative difference of less than 4% for the computed thermal resistance.},

note = {ACL},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{abouibrahim:hal-03714492,

title = {New Supply-Air Solar Wall with Thermal Storage Designed to Preheat Fresh Air: Development of a Numerical Model Adapted to Building Energy Simulation},

author = {Rima Abou Ibrahim and Pierre Tittelein and Stéphane Lassue and Fadi Hage Chehade and Laurent Zalewski},

url = {https://hal.archives-ouvertes.fr/hal-03714492},

doi = {10.3390/app12083986},

year  = {2022},

date = {2022-04-01},

urldate = {2022-04-01},

journal = {Applied Sciences},

volume = {12},

number = {8},

pages = {3986},

publisher = {MDPI},

note = {ACL},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{thonon_analytical_2021,

title = {Analytical modelling of PCM supercooling including recalescence for complete and partial heating/cooling cycles},

author = {Maxime Thonon and Gilles Fraisse and Laurent Zalewski and Mickael Pailha},

url = {https://www.sciencedirect.com/science/article/pii/S1359431121002064},

doi = {10.1016/j.applthermaleng.2021.116751},

issn = {1359-4311},

year  = {2021},

date = {2021-01-01},

urldate = {2021-03-14},

journal = {Applied Thermal Engineering},

volume = {190},

pages = {116751},

abstract = {Phase change material (PCM) experiencing supercooling and phase change hysteresis are widely reported in the literature. However, only few studies model analytically such PCM, and they mostly focus on either supercooling or phase change hysteresis, but rarely on both phenomena. Moreover, partial phase change cycles, with an incomplete melting or solidification, are rarely considered even if these processes occur frequently in latent heat thermal energy storage (LHTES) systems. The objective of this study is to model analytically the thermal behaviour of a PCM experiencing supercooling and phase change hysteresis, for complete and partial phase change cycles. The developed method, based on a heat source term, enables to model the recalescence process during the solidification. Currently rarely considered, the influence of the cooling rate on the supercooling degree and the recalescence process is evaluated with a phenomenological approach. For partial cycles, the different behavior between heating and cooling is modelled with the hysteresis model “curve scale” already validated in literature. The experimental validation is carried out on a PCM brick sample, monitoring both the heat flux and the PCM temperature, which enables to characterize a greater mass of PCM compared to direct scanning calorimeter (DSC) analysis. The selected PCM undergoing supercooling during solidification is PEG6000, a polymer suitable for domestic hot water (DHW) storage. Results show a good agreement between experimental and numerical results for complete heating and cooling cycles. The behavior laws used to model the solidification with the supercooling and recalescence processes are validated for the cooling rate range tested. The modelling is also satisfactory concerning the experiments on partial solidification for different temperature plateaus. However, the model fails to correctly represent the thermal behavior for a cooling process after a partial melting of the PCM. To conclude, the developed model enables to represent accurately the thermal behaviour of a PCM experiencing supercooling and phase change hysteresis for most of the phase change processes studied. Investigations on the thermal conditions influencing the crystalline structure and the effect on the phase change dynamic are suggested to improve supercooling modelling. The developed model needs to be validated for PCM having a higher supercooling degree, such as sugar alcohols or salt hydrates.},

note = {ACL},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{Asli2021b,

title = {Thermal and hygroscopic study of hemp concrete in real ambient conditions},

author = {Mounir Asli and Franck Brachelet and E Sassine and Emmanuel Antczak},

doi = {10.1016/j.jobe.2021.102612},

year  = {2021},

date = {2021-04-01},

journal = {Journal of Building Engineering},

pages = {102612},

publisher = {Elsevier BV},

note = {ACL},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{Kenai2021,

title = {Impact of green walls occultation on energy balance: Development of a TRNSYS model on a brick masonry house},

author = {Mohamed-Amine Kenai and Laurent Libessart and Stéphane Lassue and Didier Defer},

doi = {10.1016/j.jobe.2021.102634},

year  = {2021},

date = {2021-12-01},

journal = {Journal of Building Engineering},

volume = {44},

pages = {102634},

publisher = {Elsevier BV},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}

@article{Sassine2021,

title = {Thermal performance of lightweight concrete applications in building envelopes in Lebanon},

author = {Emilio Sassine and Elias Kinab and Yassine Cherif and Emmanuel Antczak and Michel Nasrallah},

doi = {10.1007/s12273-021-0762-2},

year  = {2021},

date = {2021-03-01},

journal = {Building Simulation},

volume = {14},

number = {5},

pages = {1359--1375},

publisher = {Springer Science and Business Media LLC},

keywords = {ER5},

pubstate = {published},

tppubtype = {article}

}