2016Article de journal ER3 Auteurs : Chartier, Thierry; Carpentier, Olivier; Genestie, Benoit; Hornez, J-C.; Monchau, Francine Numerical and ex vivo studies of a bioprobe developed for laser-induced thermotherapy (LITT) in contact with liver tissue Dans: Medical Engineering & Physics, vol. 38, no. 8, p. 733-740, 2016, (ACL). Liens @article{chartier:hal-03276066,
title = {Numerical and ex vivo studies of a bioprobe developed for laser-induced thermotherapy (LITT) in contact with liver tissue},
author = {Thierry Chartier and Olivier Carpentier and Benoit Genestie and J-C. Hornez and Francine Monchau},
url = {https://hal-unilim.archives-ouvertes.fr/hal-03276066},
doi = {10.1016/j.medengphy.2016.04.024},
year = {2016},
date = {2016-08-01},
urldate = {2016-08-01},
journal = {Medical Engineering & Physics},
volume = {38},
number = {8},
pages = {733-740},
publisher = {Elsevier},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2015Article de journal ER3 Auteurs : Libessart, Laurent; Djelal-Dantec, Chafika; de Caro, Pascale; Dubois, Isabelle Correlation between adhesion energy of release agents on the formwork and demoulding performances Dans: Construction and Building Materials, vol. 76, p. 130 - 139, 2015, ISSN: 0950-0618, (ACL). Résumé | Liens @article{libe2015a,
title = {Correlation between adhesion energy of release agents on the formwork and demoulding performances},
author = {Laurent Libessart and Chafika Djelal-Dantec and Pascale de Caro and Isabelle Dubois},
url = {http://www.sciencedirect.com/science/article/pii/S095006181401280X},
doi = {http://dx.doi.org/10.1016/j.conbuildmat.2014.11.061},
issn = {0950-0618},
year = {2015},
date = {2015-01-01},
journal = {Construction and Building Materials},
volume = {76},
pages = {130 - 139},
abstract = {Abstract To ensure an easy demoulding of the concrete, the release agent must form a homogeneous film on the formwork to resist the casting concrete. The adherence of oil with the support was studied via the solid/liquid energy adhesion. This energy was calculated using the Zisman equation involving the angle of drop and the surface tension. Various formulations were studied, in order to establish correlations between their composition and the interfacial properties. Formwork release tests were performed to assess cladding aesthetics; it was possible to define a minimal level of adhesion energy to meet the facings quality after concrete demoulding.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
Abstract To ensure an easy demoulding of the concrete, the release agent must form a homogeneous film on the formwork to resist the casting concrete. The adherence of oil with the support was studied via the solid/liquid energy adhesion. This energy was calculated using the Zisman equation involving the angle of drop and the surface tension. Various formulations were studied, in order to establish correlations between their composition and the interfacial properties. Formwork release tests were performed to assess cladding aesthetics; it was possible to define a minimal level of adhesion energy to meet the facings quality after concrete demoulding. |
2015Ouvrage ER3 Auteurs : Aid, A; Benguediab, Mohamed; Amrouche, Abdelwaheb Finite element simulation of fatigue damage accumulation for repaired component by cold expansion method Multiphysics Modelloing and simulation for Systems Design and Monitoring 2015, (OS). @book{aid2015b,
title = {Finite element simulation of fatigue damage accumulation for repaired component by cold expansion method Multiphysics Modelloing and simulation for Systems Design and Monitoring},
author = {A Aid and Mohamed Benguediab and Abdelwaheb Amrouche},
editor = {Springer},
year = {2015},
date = {2015-01-01},
note = {OS},
keywords = {ER3},
pubstate = {published},
tppubtype = {book}
}
|
2015Article de journal ER3 Auteurs : Benkabouche, S; Guechichi, H; Amrouche, Abdelwaheb; Benkhettab, Mohamed A modified nonlinear fatigue damage accumulation model under multiaxial variable amplitude loading Dans: International Journal of Mechanical Sciences, vol. 100, p. 180-194, 2015, (ACL). Liens @article{benk2015a,
title = {A modified nonlinear fatigue damage accumulation model under multiaxial variable amplitude loading},
author = {S Benkabouche and H Guechichi and Abdelwaheb Amrouche and Mohamed Benkhettab},
doi = {DOI:10.1016/j.ijmecsci.2015.06.016},
year = {2015},
date = {2015-01-01},
journal = {International Journal of Mechanical Sciences},
volume = {100},
pages = {180-194},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2015Article de journal ER3 Auteurs : Fares, Chahinez; Hemmouche, L; Belouchrani, M A; Amrouche, Abdelwaheb; Chicot, D; Puchi-Cabrera, E S Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy Dans: Materials & Design, vol. 86, p. 723-734, 2015, (ACL). Liens @article{fare2015a,
title = {Coupled effects of substrate microstructure and sulphuric acid anodizing on fatigue life of a 2017A aluminum alloy},
author = {Chahinez Fares and L Hemmouche and M A Belouchrani and Abdelwaheb Amrouche and D Chicot and E S Puchi-Cabrera},
doi = {DOI:10.1016/j.matdes.2015.07.120},
year = {2015},
date = {2015-01-01},
journal = {Materials & Design},
volume = {86},
pages = {723-734},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2015Article de journal ER3 Auteurs : Ghemari, Zine; Saad, Salah; Amrouche, Abdelwaheb; Lakehal, Abdelaziz New Model of Piezoelectric Accelerometer Relative Movement Modulus Dans: Transactions of the Institute of Measurement and Control, vol. 37, no. 8, p. 932-941, 2015, (ACL). Liens @article{ghem2015a,
title = {New Model of Piezoelectric Accelerometer Relative Movement Modulus},
author = {Zine Ghemari and Salah Saad and Abdelwaheb Amrouche and Abdelaziz Lakehal},
doi = {DOI:10.1177/0142331214549572},
year = {2015},
date = {2015-01-01},
journal = {Transactions of the Institute of Measurement and Control},
volume = {37},
number = {8},
pages = {932-941},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2015Article de journal ER3 Auteurs : Rubio-Gonzalez, C; Gomez-Rosas, G; Ruiz, R; Nait-Abdelaziz, Moussa; Amrouche, Abdelwaheb Effect of laser shock peening and cold expansion on fatigue performance of open hole samples Dans: Structural Engineering and Mechanics, vol. 53, no. 5, p. 867-880, 2015, (ACL). Liens @article{rubi2015a,
title = {Effect of laser shock peening and cold expansion on fatigue performance of open hole samples},
author = {C Rubio-Gonzalez and G Gomez-Rosas and R Ruiz and Moussa Nait-Abdelaziz and Abdelwaheb Amrouche},
doi = {DOI:10.12989/sem.2015.53.5.867},
year = {2015},
date = {2015-01-01},
journal = {Structural Engineering and Mechanics},
volume = {53},
number = {5},
pages = {867-880},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2015Conférence ER3 Auteurs : Ziraoui, Hichem; Kanit, Toufik; Amrouche, Abdelwaheb; Naït-Abdelaziz, Moussa Fretting-fatigue simulation of polycrystalline aluminium alloy using crystal plasticity finite element method International Conference on mechanics of complex solids and fluids, Lille, 2015, (ACTI). @conference{zira2015,
title = {Fretting-fatigue simulation of polycrystalline aluminium alloy using crystal plasticity finite element method},
author = {Hichem Ziraoui and Toufik Kanit and Abdelwaheb Amrouche and Moussa Naït-Abdelaziz},
year = {2015},
date = {2015-01-01},
booktitle = {International Conference on mechanics of complex solids and fluids},
address = {Lille},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2015Proceedings Article ER3 Auteurs : Dairou, Mariam Mohaman; Vanhove, Yannick; Djelal-Dantec, Chafika; Kada, Hassina; Gotteland, Philippe Caractérisation en laboratoire de l'enfoncement d'une cage d'armatures dans le béton frais Dans: Rencontres Universitaires de Génie Civil, 2015, (ACTN). @inproceedings{dairou2015caracterisation,
title = {Caractérisation en laboratoire de l'enfoncement d'une cage d'armatures dans le béton frais},
author = {Mariam Mohaman Dairou and Yannick Vanhove and Chafika Djelal-Dantec and Hassina Kada and Philippe Gotteland},
year = {2015},
date = {2015-01-01},
booktitle = {Rencontres Universitaires de Génie Civil},
note = {ACTN},
keywords = {ER3},
pubstate = {published},
tppubtype = {inproceedings}
}
|
2015Article de journal ER3 Auteurs : Xing, Zhi; Djelal-Dantec, Chafika; Vanhove, Yannick; Kada, Hassina Wood waste in concrete blocks made by vibrocompression Dans: Environmental Processes, vol. 2, no. 1, p. 223–232, 2015, (ACL). @article{xing2015wood,
title = {Wood waste in concrete blocks made by vibrocompression},
author = {Zhi Xing and Chafika Djelal-Dantec and Yannick Vanhove and Hassina Kada},
year = {2015},
date = {2015-01-01},
journal = {Environmental Processes},
volume = {2},
number = {1},
pages = {223--232},
publisher = {Springer},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER3 Auteurs : Alatorre, N; Ambriz, Ricardo Raphael; Noureddine, B; Amrouche, Abdelwaheb; Talha, Abderrahim; Jaramillo, D Tensile Properties and Fusion Zone Hardening for GMAW and MIEA Welds of a 7075-T651 Aluminum Alloy Dans: Acta Metallurgica Sinica, vol. 27, p. 694-704, 2014, (ACL). Liens @article{alat2014,
title = {Tensile Properties and Fusion Zone Hardening for GMAW and MIEA Welds of a 7075-T651 Aluminum Alloy},
author = {N Alatorre and Ricardo Raphael Ambriz and B Noureddine and Abdelwaheb Amrouche and Abderrahim Talha and D Jaramillo},
doi = {DOI:10.1007/s40195-014-0103-x},
year = {2014},
date = {2014-01-01},
journal = {Acta Metallurgica Sinica},
volume = {27},
pages = {694-704},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER3 Auteurs : Belloula, Amar; Nait-Abdelaziz, Moussa; Amrouche, Abdelwaheb; Benseddiq, Noureddine Comparison of the cracking energy density and the SmithWatsonTopper parameters in predicting fretting fatigue lifetime of a steel/aluminum alloy contact Dans: International Journal of Fatigue and Fracture of Engineering Materials and Structures, vol. 37, no. 12, p. 1355-1366, 2014, (ACL). Liens @article{bell2014,
title = {Comparison of the cracking energy density and the SmithWatsonTopper parameters in predicting fretting fatigue lifetime of a steel/aluminum alloy contact},
author = {Amar Belloula and Moussa Nait-Abdelaziz and Abdelwaheb Amrouche and Noureddine Benseddiq},
doi = {DOI:10.1111/ffe.12252},
year = {2014},
date = {2014-01-01},
journal = {International Journal of Fatigue and Fracture of Engineering Materials and Structures},
volume = {37},
number = {12},
pages = {1355-1366},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Ouvrage ER3 Auteurs : Benhamena, A; Aminallah, A; Baltach, L; Aid, A; Benguediab, Mohamed; Amrouche, Abdelwaheb; Benseddiq, Noureddine The fretting fatigue behavior of bolted assemblies Design and Computation of Modern Engineering Materials Advances Structured Materials, 2014, (OS). @book{benh2014,
title = {The fretting fatigue behavior of bolted assemblies Design and Computation of Modern Engineering Materials},
author = {A Benhamena and A Aminallah and L Baltach and A Aid and Mohamed Benguediab and Abdelwaheb Amrouche and Noureddine Benseddiq},
editor = {Springer},
year = {2014},
date = {2014-01-01},
publisher = {Advances Structured Materials},
note = {OS},
keywords = {ER3},
pubstate = {published},
tppubtype = {book}
}
|
2014Article de journal ER3 Auteurs : Viveros, K C; Ambriz, R R; Amrouche, Abdelwaheb; Talha, Abderrahim; García, C; Jaramillo, D Cold hole expansion effect on the fatigue crack growth in welds of a 6061-T6 aluminum alloy Dans: Journal of Materials Processing Technology, vol. 214, no. 11, p. 26062616, 2014, (ACL). Liens @article{vive2014,
title = {Cold hole expansion effect on the fatigue crack growth in welds of a 6061-T6 aluminum alloy},
author = {K C Viveros and R R Ambriz and Abdelwaheb Amrouche and Abderrahim Talha and C García and D Jaramillo},
doi = {DOI:10.1016/j.jmatprotec.2014.05.030},
year = {2014},
date = {2014-01-01},
journal = {Journal of Materials Processing Technology},
volume = {214},
number = {11},
pages = {26062616},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER3 Auteurs : Goudjil, N; Djelal-Dantec, Chafika; Vanhove, Yannick; Kada, Hassina; Heloun, N Impact of temperature on the demoulding of concrete elements with a polarization process Dans: Construction and Building Materials, vol. 54, p. 402–412, 2014, (ACL). Liens @article{Goudjil2014,
title = {Impact of temperature on the demoulding of concrete elements with a polarization process},
author = {N Goudjil and Chafika Djelal-Dantec and Yannick Vanhove and Hassina Kada and N Heloun},
doi = {10.1016/j.conbuildmat.2013.12.034},
year = {2014},
date = {2014-03-01},
journal = {Construction and Building Materials},
volume = {54},
pages = {402--412},
publisher = {Elsevier BV},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2014Article de journal ER3 Auteurs : Libessart, Laurent; Djelal-Dantec, Chafika; de Caro, Pascale Influence of the type of release oil on steel formwork corrosion and facing aesthetics Dans: Construction and Building Materials, vol. 68, p. 391 - 401, 2014, ISSN: 0950-0618, (ACL). Résumé | Liens @article{LIBESSART2014391,
title = {Influence of the type of release oil on steel formwork corrosion and facing aesthetics},
author = {Laurent Libessart and Chafika Djelal-Dantec and Pascale de Caro},
url = {http://www.sciencedirect.com/science/article/pii/S0950061814006849},
doi = {https://doi.org/10.1016/j.conbuildmat.2014.06.065},
issn = {0950-0618},
year = {2014},
date = {2014-01-01},
journal = {Construction and Building Materials},
volume = {68},
pages = {391 - 401},
abstract = {The quality of the concrete facings results from the implementation of release agents and the casing surface quality. It is interesting to characterize the behaviour of release agents over the lifetime of the formwork. This study is based on the many ones test physicochemical and esthetics realized on two types of surface of formwork like on three types of applications. In complement, the ageing of the casing formwork was characterized by electrochemical spectroscopy of impedance and thanks to the correlation with the aesthetic tests will allow to find from new mechanisms to the interfaces related to the studied oil’s formulations.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
The quality of the concrete facings results from the implementation of release agents and the casing surface quality. It is interesting to characterize the behaviour of release agents over the lifetime of the formwork. This study is based on the many ones test physicochemical and esthetics realized on two types of surface of formwork like on three types of applications. In complement, the ageing of the casing formwork was characterized by electrochemical spectroscopy of impedance and thanks to the correlation with the aesthetic tests will allow to find from new mechanisms to the interfaces related to the studied oil’s formulations. |
2013Article de journal ER3 Auteurs : Djebli, A; Aid, A; Bendouba, M; Amrouche, Abdelwaheb; Benguediab, M; Benseddiq, N A non-linear energy model of fatigue damage accumulation and its verification for Al-2024 aluminum alloy. International Journal of Non-Linear Mechanics. Vol 51, pp 145â151, 201 Dans: 2013, (ACL). @article{djeb2013,
title = {A non-linear energy model of fatigue damage accumulation and its verification for Al-2024 aluminum alloy. International Journal of Non-Linear Mechanics. Vol 51, pp 145â151, 201},
author = {A Djebli and A Aid and M Bendouba and Abdelwaheb Amrouche and M Benguediab and N Benseddiq},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick Influence of superplaticizien on the properties of the concrete / oil / forarwork interface Construction and Building materials Dans: 2013, (ACL). @article{djel2013,
title = {Influence of superplaticizien on the properties of the concrete / oil / forarwork interface Construction and Building materials},
author = {Chafika Djelal-Dantec and Yannick Vanhove},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2013Conférence ER3 Auteurs : Belloula, Amar; Amrouche, Abdelwaheb; Nait-Abdelaziz, Moussa; Benseddiq, Noureddine Application of the Cracking Energy Density (CED) multiaxial fatigue criteria for fretting fatigue life prediction: case of mono-contact steel/Al 10th International Conference on MulmtiaxialFatigue and Fracture, Kyoto (Japan), 2013, (ACTI). @conference{bell2013,
title = {Application of the Cracking Energy Density (CED) multiaxial fatigue criteria for fretting fatigue life prediction: case of mono-contact steel/Al},
author = {Amar Belloula and Abdelwaheb Amrouche and Moussa Nait-Abdelaziz and Noureddine Benseddiq},
year = {2013},
date = {2013-01-01},
booktitle = {10th International Conference on MulmtiaxialFatigue and Fracture},
address = {Kyoto (Japan)},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2013Conférence ER3 Auteurs : Belloula, Amar; Amrouche, Abdelwaheb; Nait-Abdelaziz, Moussa; Benseddiq, Noureddine A study on fretting fatigue crack nucleation in 6082-T6 aluminium alloys 7th International Symposium on Fretting Fatigue, Oxford, 2013, (ACTI). @conference{bell2013c,
title = {A study on fretting fatigue crack nucleation in 6082-T6 aluminium alloys},
author = {Amar Belloula and Abdelwaheb Amrouche and Moussa Nait-Abdelaziz and Noureddine Benseddiq},
year = {2013},
date = {2013-04-01},
booktitle = {7th International Symposium on Fretting Fatigue},
address = {Oxford},
note = {ACTI},
keywords = {ER3},
pubstate = {published},
tppubtype = {conference}
}
|
2013Article de journal ER3 Auteurs : Hemmouche, L; Chicot, D; Amrouche, Abdelwaheb; Iost, Alain; Belouchrani, M A; Decoopman, Xavier; Louis, Ghislain; Puchi-Cabrera, E S An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques Dans: Materials Science and Engineering: A, vol. 585, p. 155 - 164, 2013, ISSN: 0921-5093, (ACL). Liens @article{hemm2013,
title = {An analysis of the elastic properties of a porous aluminium oxide film by means of indentation techniques},
author = {L Hemmouche and D Chicot and Abdelwaheb Amrouche and Alain Iost and M A Belouchrani and Xavier Decoopman and Ghislain Louis and E S Puchi-Cabrera},
url = {http://www.sciencedirect.com/science/article/pii/S092150931300823X},
doi = {http://dx.doi.org/10.1016/j.msea.2013.07.054},
issn = {0921-5093},
year = {2013},
date = {2013-01-01},
journal = {Materials Science and Engineering: A},
volume = {585},
pages = {155 - 164},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER3 Auteurs : Miloudi, Abdelkader; Zemri, Mokhtar; Benguediab, Mohamed; Mazari, Mohamed; Amrouche, Abdelwaheb Crack Propagation under Variable Amplitude Loading Dans: Materials Research, vol. 16, no. 5, p. 1161-1168, 2013, (ACL). Liens @article{milo2013,
title = {Crack Propagation under Variable Amplitude Loading},
author = {Abdelkader Miloudi and Mokhtar Zemri and Mohamed Benguediab and Mohamed Mazari and Abdelwaheb Amrouche},
doi = {DOI:10.1590/S1516-14392013005000110},
year = {2013},
date = {2013-01-01},
journal = {Materials Research},
volume = {16},
number = {5},
pages = {1161-1168},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2013Article de journal ER3 Auteurs : Bal, L; Buyle-Bodin, Francois Artificial Neural Network for Predicting Đrying Shrinkage of Concrete,Construction and Building Materials, (2013), pp. 248-254 Dans: 2013, (ACL). @article{bal2013ac,
title = {Artificial Neural Network for Predicting Đrying Shrinkage of Concrete,Construction and Building Materials, (2013), pp. 248-254},
author = {L Bal and Francois Buyle-Bodin},
year = {2013},
date = {2013-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER3 Auteurs : Aid, Abdelkrim; BENDOUBA, M; AMINALLAH, L; Amrouche, Abdelwaheb; BENSEDDIQ, N; BENGUEDIAD, M An equivalent stress process for fatigue life estimation under multiaxialloadings based on a new non linear damage model. Materials Scienceand Engineering A, 538, pp 20 ^aÂÂ 27. 201 Dans: 2012, (ACL). @article{aid2012,
title = {An equivalent stress process for fatigue life estimation under multiaxialloadings based on a new non linear damage model. Materials Scienceand Engineering A, 538, pp 20 ^aÂÂ 27. 201},
author = {Abdelkrim Aid and M BENDOUBA and L AMINALLAH and Abdelwaheb Amrouche and N BENSEDDIQ and M BENGUEDIAD},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER3 Auteurs : BENHAMENA, A; Amrouche, Abdelwaheb; TALHA, A; BENSEDDIQ, N Effect of contact forces on fretting fatigue behavior of bolted plates:Numerical and experimental analysis. Ŧribology International. Vol48, pp 237 a 245. 2012. Dans: 2012, (ACL). @article{benh2012a,
title = {Effect of contact forces on fretting fatigue behavior of bolted plates:Numerical and experimental analysis. Ŧribology International. Vol48, pp 237 a 245. 2012.},
author = {A BENHAMENA and Abdelwaheb Amrouche and A TALHA and N BENSEDDIQ},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER3 Auteurs : Goudjil, N; Vanhove, Yannick; Djelal-Dantec, Chafika; Kada, Hassina Electro-osmosis applied for formwork removal of concrete, Journalof Advanced Concrete Ŧechnology, Vol. 10, 2012, p.301-312. Dans: 2012, (ACL). @article{goud2012a,
title = {Electro-osmosis applied for formwork removal of concrete, Journalof Advanced Concrete Ŧechnology, Vol. 10, 2012, p.301-312.},
author = {N Goudjil and Yannick Vanhove and Chafika Djelal-Dantec and Hassina Kada},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER3 Auteurs : Haddi, Abdelkader; IMAD, A; VEGA, G Ŧhe influence of the drawing parameters and temperature rise on theprediction of chevron crack formation in wire drawing, InternationalJournal of Fracture, 176:171^aÂÂ18 Dans: 2012, (ACL). @article{hadd2012,
title = {Ŧhe influence of the drawing parameters and temperature rise on theprediction of chevron crack formation in wire drawing, InternationalJournal of Fracture, 176:171^aÂÂ18},
author = {Abdelkader Haddi and A IMAD and G VEGA},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER3 Auteurs : Haddi, Abdelkader; IMAD, A; VEGA, G On the Analysis of Đie Wear in Wire-Đrawing Process, Ŧribology Ŧransactions,55:4, 466-472 2012. Dans: 2012, (ACL). @article{hadd2012a,
title = {On the Analysis of Đie Wear in Wire-Đrawing Process, Ŧribology Ŧransactions,55:4, 466-472 2012.},
author = {Abdelkader Haddi and A IMAD and G VEGA},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER3 Auteurs : Kesteloot, Stéphan; SAADE, M; Djelal-Dantec, Chafika; BENSLIMANE, I; KHOUFACHE, N Utilisation de materiaux composites pour la rehabilitation des ouvragesd assainissement en meuliere, Annales du BTP n 1-2, p. 15-24,Mars 2012 Dans: 2012, (ACL). @article{kest2012,
title = {Utilisation de materiaux composites pour la rehabilitation des ouvragesd assainissement en meuliere, Annales du BTP n 1-2, p. 15-24,Mars 2012},
author = {Stéphan Kesteloot and M SAADE and Chafika Djelal-Dantec and I BENSLIMANE and N KHOUFACHE},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER3 Auteurs : Semari, Z; Aid, A; Benhamena, A; Amrouche, Abdelwaheb; Benguediab, M; Sadok, A Effect of Residual Stresses Induced by Cold Expansion on the CrackGrowth in 6082 Aluminum Alloy. Engineering Fracture Mechanics. InPress, Accepted Manuscript, Available online 12 Đecember 2012. Dans: 2012, (ACL). @article{Sema2012,
title = {Effect of Residual Stresses Induced by Cold Expansion on the CrackGrowth in 6082 Aluminum Alloy. Engineering Fracture Mechanics. InPress, Accepted Manuscript, Available online 12 Đecember 2012.},
author = {Z Semari and A Aid and A Benhamena and Abdelwaheb Amrouche and M Benguediab and A Sadok},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2012Article de journal ER3 Auteurs : Vanhove, Yannick; Djelal-Dantec, Chafika; SCHWENDENMANN, G; BRISSET, P Study of Self Consolidating Concrete stability during their placement,Construction and Building Materials, Vol. 35, 2012, p. 101-108. Dans: 2012, (ACL). @article{vanh2012a,
title = {Study of Self Consolidating Concrete stability during their placement,Construction and Building Materials, Vol. 35, 2012, p. 101-108.},
author = {Yannick Vanhove and Chafika Djelal-Dantec and G SCHWENDENMANN and P BRISSET},
year = {2012},
date = {2012-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER3 Auteurs : Aid, Abdelkrim; Amrouche, Abdelwaheb; BOUIADJRA, B B; BENGUEDIAB, M; MESMACQUE, G Fatigue life prediction under variable loading based on a new damagemodel. Dans: Materials and Đesign, vol. 32, no. 1, p. 183-191, 2011, (ACL). @article{aid2011,
title = {Fatigue life prediction under variable loading based on a new damagemodel.},
author = {Abdelkrim Aid and Abdelwaheb Amrouche and B B BOUIADJRA and M BENGUEDIAB and G MESMACQUE},
year = {2011},
date = {2011-01-01},
journal = {Materials and Đesign},
volume = {32},
number = {1},
pages = {183-191},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER3 Auteurs : BENHAMENA, A; AMINALLAH, L; BOUIADJRA, B B; BENGUEDIAB, M; Amrouche, Abdelwaheb; BENSEDDIQ, N J integral solution for semi-elliptical surface crack in high densitypoly-ethylene pipe under bending. Materials and Đesign 32 (5),pp. 2561-2569. 2011. Dans: 2011, (ACL). @article{benh2011,
title = {J integral solution for semi-elliptical surface crack in high densitypoly-ethylene pipe under bending. Materials and Đesign 32 (5),pp. 2561-2569. 2011.},
author = {A BENHAMENA and L AMINALLAH and B B BOUIADJRA and M BENGUEDIAB and Abdelwaheb Amrouche and N BENSEDDIQ},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER3 Auteurs : Guechichi, H; Benkabouche, S; Amrouche, Abdelwaheb; Benkhettab, M A high fatigue life prediction methodology under constant amplitudemultiaxial proportional loadings. Materials Science and EngineeringA 528 (13-14), pp. 4789-4798. 2011. Dans: 2011, (ACL). @article{guer2011a,
title = {A high fatigue life prediction methodology under constant amplitudemultiaxial proportional loadings. Materials Science and EngineeringA 528 (13-14), pp. 4789-4798. 2011.},
author = {H Guechichi and S Benkabouche and Abdelwaheb Amrouche and M Benkhettab},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER3 Auteurs : Haddi, Abdelkader; IMAD, A; VEGA, G Analysis of temperature and speed effects on the drawing stress forimproving the wire drawing process, Materials and Đesign 32, 4310-ÂÂ431 Dans: 2011, (ACL). @article{hadd2011,
title = {Analysis of temperature and speed effects on the drawing stress forimproving the wire drawing process, Materials and Đesign 32, 4310-ÂÂ431},
author = {Abdelkader Haddi and A IMAD and G VEGA},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER3 Auteurs : Kesteloot, Stéphan; Djelal-Dantec, Chafika; BENSLIMANE, I; BARAKA, S Strengthening of Sewerage Systems with Composites Plates: Numerical,Materials Sciences and Applications, 2011, Vol. 2, N°3, p. 151-16 Dans: 2011, (ACL). @article{kest2011,
title = {Strengthening of Sewerage Systems with Composites Plates: Numerical,Materials Sciences and Applications, 2011, Vol. 2, N°3, p. 151-16},
author = {Stéphan Kesteloot and Chafika Djelal-Dantec and I BENSLIMANE and S BARAKA},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2011Article de journal ER3 Auteurs : Kesteloot, Stéphan; Djelal-Dantec, Chafika; Benslimane, I; Baraka, S Strengthening of Sewerage Systems with Composites Plates: Numerical, Materials Sciences and Applications, 2011, Vol. 2, N°3, p. 151-16 Dans: 2011, (ACL). @article{kest2011a,
title = {Strengthening of Sewerage Systems with Composites Plates: Numerical, Materials Sciences and Applications, 2011, Vol. 2, N°3, p. 151-16},
author = {Stéphan Kesteloot and Chafika Djelal-Dantec and I Benslimane and S Baraka},
year = {2011},
date = {2011-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER3 Auteurs : Ambriz, R R; Mesmacque, G; Ruiz, A; Amrouche, Abdelwaheb; Lopez, V H Effect of the welding profile generated by the modified indirect electric arc technique on the fatigue behavior of 6061-Ŧ6 aluminum alloy. Materials Science and Engineering A ,527 (7-8), pp. 2057-2064. Dans: 2010, (ACL). @article{ambr2010,
title = {Effect of the welding profile generated by the modified indirect electric arc technique on the fatigue behavior of 6061-Ŧ6 aluminum alloy. Materials Science and Engineering A ,527 (7-8), pp. 2057-2064.},
author = {R R Ambriz and G Mesmacque and A Ruiz and Abdelwaheb Amrouche and V H Lopez},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER3 Auteurs : AMBRIZ, R R; MESMACQUE, G; RUIZ, A; Amrouche, Abdelwaheb; LOPEZ, V H; BENSEDDIQ, N Fatigue crack growth under a constant amplitude loading of Al-6061-Ŧ6welds obtained by modified indirect electric arc technique. Scienceand Ŧechnology of Welding and Joining. Volume: 15, Issue: 6. pp 514-521.2010. Dans: 2010, (ACL). @article{ambr2010a,
title = {Fatigue crack growth under a constant amplitude loading of Al-6061-Ŧ6welds obtained by modified indirect electric arc technique. Scienceand Ŧechnology of Welding and Joining. Volume: 15, Issue: 6. pp 514-521.2010.},
author = {R R AMBRIZ and G MESMACQUE and A RUIZ and Abdelwaheb Amrouche and V H LOPEZ and N BENSEDDIQ},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER3 Auteurs : AMINALLAH, L; MESMACQUE, G; SERIER, B; Amrouche, Abdelwaheb; BENSEDDIQ, N J integral computation for cracks in polypropylene pipes under internal pressure. Key Engineering Materials 417-418, pp. 453-456. 2010 Dans: 2010, (ACL). @article{amin2010a,
title = {J integral computation for cracks in polypropylene pipes under internal pressure. Key Engineering Materials 417-418, pp. 453-456. 2010},
author = {L AMINALLAH and G MESMACQUE and B SERIER and Abdelwaheb Amrouche and N BENSEDDIQ},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER3 Auteurs : BENHAMENA, A; BOUIADJRA, BACHIR B; Amrouche, Abdelwaheb; MESMACQUE, G; BENSEDDIQ, N; BENGUEDIAB, M Ŧhree finite element analysis of semi-elliptical crack in high densitypoly-ethylene pipe subjected to internal pressure. Materials anḌesign 31 (6), pp. 3038-3043. 2010. Dans: 2010, (ACL). @article{benh2010a,
title = {Ŧhree finite element analysis of semi-elliptical crack in high densitypoly-ethylene pipe subjected to internal pressure. Materials anḌesign 31 (6), pp. 3038-3043. 2010.},
author = {A BENHAMENA and BACHIR B BOUIADJRA and Abdelwaheb Amrouche and G MESMACQUE and N BENSEDDIQ and M BENGUEDIAB},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER3 Auteurs : BENHAMENA, A; TALHA, A; BENSEDDIQ, N; Amrouche, Abdelwaheb; MESMACQUE, G; BENGUEDIAB, M Effect of clamping force on fretting fatigue behaviour of boltedassemblies: Case of couple steel-aluminium. Materials Science andEngineering A 527 (23), pp. 6413-6421. 2010. Dans: 2010, (ACL). @article{benh2010b,
title = {Effect of clamping force on fretting fatigue behaviour of boltedassemblies: Case of couple steel-aluminium. Materials Science andEngineering A 527 (23), pp. 6413-6421. 2010.},
author = {A BENHAMENA and A TALHA and N BENSEDDIQ and Abdelwaheb Amrouche and G MESMACQUE and M BENGUEDIAB},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER3 Auteurs : Cadenas-Herrera, P; Amrouche, Abdelwaheb; Mesmacque, G; Jozwiak, K; Puchi-cabrera,; Eli, S Influence of residual fatigue damage on the fracture toughness parametersof an AA6082-Ŧ6 aluminum alloy. International Journal of Fatigueand Fractures of Engineering Materials and Structures. 33 (1), pp.54-65. 2010. Dans: 2010, (ACL). @article{cade2010,
title = {Influence of residual fatigue damage on the fracture toughness parametersof an AA6082-Ŧ6 aluminum alloy. International Journal of Fatigueand Fractures of Engineering Materials and Structures. 33 (1), pp.54-65. 2010.},
author = {P Cadenas-Herrera and Abdelwaheb Amrouche and G Mesmacque and K Jozwiak and Puchi-cabrera and S Eli},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER3 Auteurs : Djelal-Dantec, Chafika; Vanhove, Yannick; CHAMBELLAN, D; BRISSET, P Influence of the thickness of demoulding oils on the aesthetic qualityof facings, Materials and Structures, Vol. 43, N°5, June 2010, p.687-698 Dans: 2010, (ACL). @article{djel2010,
title = {Influence of the thickness of demoulding oils on the aesthetic qualityof facings, Materials and Structures, Vol. 43, N°5, June 2010, p.687-698},
author = {Chafika Djelal-Dantec and Yannick Vanhove and D CHAMBELLAN and P BRISSET},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2010Article de journal ER3 Auteurs : Kesteloot, Stéphan; Djelal-Dantec, Chafika; BENSLIMANE, I; KHOUFACHE, N Stengthening of masonry arches using carbon plates, Constructionand Building Materials Dans: 2010, (ACL). @article{kest2010,
title = {Stengthening of masonry arches using carbon plates, Constructionand Building Materials},
author = {Stéphan Kesteloot and Chafika Djelal-Dantec and I BENSLIMANE and N KHOUFACHE},
year = {2010},
date = {2010-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER3 Auteurs : Aminallah, L; Achour, T; Bouiadjra, B Bachir; Serier, B; Amrouche, Abdelwaheb; Feaugas,; Benssediq, N Analysis of the distribution of thermal residual stresses in bonded composite repair of metallic aircraft structures. Computational Materials Science, 46 (4), pp. 1023-1027. 2009. Dans: 2009, (ACL). @article{amin2009a,
title = {Analysis of the distribution of thermal residual stresses in bonded composite repair of metallic aircraft structures. Computational Materials Science, 46 (4), pp. 1023-1027. 2009.},
author = {L Aminallah and T Achour and B Bachir Bouiadjra and B Serier and Abdelwaheb Amrouche and Feaugas and N Benssediq},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER3 Auteurs : SANCHEZ-SANTANA, U; RUBIO-GONZALEZ, C; MESMACQUE, G; Amrouche, Abdelwaheb Effect of fatigue damage on the dynamic tensile behavior of aluminiumalloy 6061-Ŧ6 and AISI 4140 Ŧ steel. International Journal of Fatigue.31 (11-12), pp. 1928-1937 .2009. Dans: 2009, (ACL). @article{sanc2009,
title = {Effect of fatigue damage on the dynamic tensile behavior of aluminiumalloy 6061-Ŧ6 and AISI 4140 Ŧ steel. International Journal of Fatigue.31 (11-12), pp. 1928-1937 .2009.},
author = {U SANCHEZ-SANTANA and C RUBIO-GONZALEZ and G MESMACQUE and Abdelwaheb Amrouche},
year = {2009},
date = {2009-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER3 Auteurs : Véga, Guillaume; Haddi, Abdelkader; Imad, Abdellatif Investigation of process parameters effect on the copper-wire drawing Dans: Materials and Đesign, vol. 30, p. 3308-3312., 2009, (ACL). @article{vega2009,
title = {Investigation of process parameters effect on the copper-wire drawing},
author = {Guillaume Véga and Abdelkader Haddi and Abdellatif Imad},
year = {2009},
date = {2009-01-01},
journal = {Materials and Đesign},
volume = {30},
pages = {3308-3312.},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2009Article de journal ER3 Auteurs : Guillaume, Vega; Haddi, Abdelkader; Abdellatif, Imad Temperature effects on wire drawing process : experimental investigation Dans: International journal of material forming, vol. 2, no. 1, p. 229-232, 2009, ISSN: 1960-6214, (ACL). Liens @article{,
title = {Temperature effects on wire drawing process : experimental investigation},
author = {Vega Guillaume and Abdelkader Haddi and Imad Abdellatif},
url = {https://link.springer.com/article/10.1007/s12289-009-0468-y#citeas},
doi = {https://doi.org/10.1007/s12289-009-0468-y},
issn = {1960-6214},
year = {2009},
date = {2009-01-01},
journal = {International journal of material forming},
volume = {2},
number = {1},
pages = {229-232},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|
2008Article de journal ER3 Auteurs : Amrouche, Abdelwaheb; SU, M; AID, A; MESMACQUE, G Numerical study of the optimum degree of cold expansion: Applicationfor the pre-cracked specimen with the expanded hole at the cracktip. Journal of Materials Processing Ŧechnology, 197, pp 250-254,2008. Dans: 2008, (ACL). @article{amro2008,
title = {Numerical study of the optimum degree of cold expansion: Applicationfor the pre-cracked specimen with the expanded hole at the cracktip. Journal of Materials Processing Ŧechnology, 197, pp 250-254,2008.},
author = {Abdelwaheb Amrouche and M SU and A AID and G MESMACQUE},
year = {2008},
date = {2008-01-01},
note = {ACL},
keywords = {ER3},
pubstate = {published},
tppubtype = {article}
}
|